Ruijie RG-S6250-48XS8CQ Series Installations- und Betriebsanleitung

Ruijie RG-S6250-48XS8CQ Series Switches

Hardware Installation and Reference Guide

Ruijie Networks reserves all copyrights of this document. Any reproduction, excerption, backup, modification,

transmission, translation or commercial use of this document or any portion of this document, in any form or by any means,

without the prior written consent of Ruijie Networks is prohibited.

Exemption Statement

This document is provided “as is”. The contents of this document are subject to change without any notice. Please obtain

the latest information through the Ruijie Networks website. Ruijie Networks endeavors to ensure content accuracy and will

not shoulder any responsibility for losses and damages caused due to content omissions, inaccuracies or errors.

Preface

Thank you for using our switches. This guide will help you install and use the switches.

Scope

This manual describes the functions and physical features of the switches, and presents the installation procedure,

troubleshooting procedure, technical specifications, and specifications and usages rules of cables and connectors. It is

intended for the users that have some experience in installing and maintaining network hardware and want to learn the

above information. At the same time, it is assumed that the users of this switch are already familiar with the related

terms and concepts of Ethernet.

Obtaining Technical Assistance

Ruijie Networks Website: https://www.ruijienetworks.com/

Technical Support Website: https://ruijienetworks.com/support

Case Portal: http://caseportal.ruijienetworks.com

Community: http://community.ruijienetworks.com

Technical Support Email: [email protected]

Skype: [email protected]

Related Documents

Documents

Description

Configuration Guide

Describes network protocols and related mechanisms that supported by the

product, with configuration examples.

Command Reference

Describes the related configuration commands, including command modes,

parameter descriptions, usage guides, and related examples.

Symbol Conventions

Means reader take note. Notes contain helpful suggestions or references.

Means reader be careful. In this situation, you might do something that could result in equipment damage or loss

of data.

Ruijie RG-S6250-48XS8CQ Series Switches Hardware Installation and Reference Guide Product Overview

- 2 -

1 Product Overview

Ruijie RG-S6250-48XS8CQ switches are data center oriented high density 10G access switches, providing 10G/100G

access, low latency, and complete data center features. RG-S6250-48XS8CQ switches, with up to 48 10G ports and 8

100G ports, can be used with RG-N18000-X/RG-S6500-4C switches to compose a high-performance and

high-reliability data center network.

The RG-S6250-48XS8CQ Series Switches:

Model

100G

QSFP28

Ethernet

Port

10G SFP+

Ethernet

Port

10GBase-T

Ethernet Port

Extension

Module Slot

Redundant

Fan

Redundant

Power Supply

RG-S6250-48XS8CQ

N/A

3+1

1+1

An SFP+ port supports 10GBase-R and can be downward compatible with 1000Base-X.

A QSFP28 port supports both 100G/40G mode and 4x25G/4x10G mode.

Specifications

Model

RG-S6250-48XS8CQ

CPU

Quad-core processer, 1.2GHz

BOOT ROM

16MB

FLASH Memory

8GB

SDRAM

DDR4 4GB (Compatibility: 8GB)

Extension Module

Slot

Unsupported

Extension Module

Unsupported

Fan Slot

4 (support 3+1 redundancy, configure at least 3 fan modules in one switch)

Fan Module

M1EFAN II-F, M1EFAN II-R

Power Supply

Slot

2 (support 1+1 redundancy)

Power Module

RG-PA550I-F, RG-PA550I-R

Power Supply

Input

AC input

Rated voltage range: 100V AC to 240V AC

Maximum voltage range: 90V AC to 264V AC

Frequency: 50/60 Hz

Rated current: 3.5A to 7.2A

High voltage direct current (HVDC) input:

Input voltage range: 192V DC to 288V DC

Input current range: 3.6A

Power

Consumption

Less than 300 W

Optical Module

Refer to Appendix B

The supported modules update at any time, contact Ruijie Networks for details.

SFP+ Port

Supported

Ruijie RG-S6250-48XS8CQ Series Switches Hardware Installation and Reference Guide Product Overview

- 3 -

QSFP28 Port

Supported

FC Port

Unsupported

10GBASE-T Port

Unsupported

Temperature

Warning

Support temperature warning and over-temperature protection.

EMC Standards

GB9254-2008 CLASS A

Safety Standards

GB4943-2011

Working

Temperature

0°C to 45°C (32°F to 113°F)

Storage

Temperature

-40°C to 70°C (-40°F to 158°F)

Working Humidity

10% to 90% RH (non-condensing)

Weight

Net weight: 8 kg (including 4 fan modules and 2 power modules)

Dimensions

(L x W x H)

442 mm x 387 mm x 44 mm, 1RU

RG-S6250-48XS8CQ switch is a class A product. In a domestic environment, this product may cause radio

interference in which case the user may be required to take adequate measures.

The 10G/100G Ethernet port of the RG-S6250-48XS8CQ switch supports DAC. For a detailed model and

specification, refer to Appendix B.

Product Appearance

The hardware of the S6250-48XS8CQ includes the chassis, the power supply system and the heat dissipation system.

The power supply system: Provides two power supply slots, which support 1+1 power supply redundancy. It is

recommended users configure power supply redundancy.

The heat dissipation system: Provides four fan module slots, which support 3+1 fan redundancy. It is

recommended users configure all fans redundancy.

Figure 1-1 Appearance of the RG-S6250-48XS8CQ

Front Panel

Ruijie RG-S6250-48XS8CQ Series Switches Hardware Installation and Reference Guide Product Overview

- 4 -

Figure 1-2 Front Panel of the RG-S6250-48XS8CQ

Notes:

1. Switch status indicator

2. Switch locator indicator

3. SFP+ port

4. SFP+ port status indicator

5. QSFP28 port

6. QSFP28 port status indicator

The RG-S6250-48XS8CQ supports 100G QSFP28 module and 10G SFP+ module.

Back Panel

Figure 1-3 Back Panel of the RG-S6250-48XS8CQ

Notes:

1. Power supply module slot

2. Fan module slot

3. Locator indicator

4. MGMT port

5. USB 2.0 port

6. Grounding point

7. Asset label

8. Switch status indicator

9. Console port

Asset Management Label

The asset management label is next to the switch status indicator of the switch back panel. The label is movable and

can be withdrawn from the device. Users can mark the information such as asset name, category, code and registration

date on the label which helps to improve asset management accuracy and efficiency.

Figure 1-4 Asset Management Label of the RG-S6250-48XS8CQ

Ruijie RG-S6250-48XS8CQ Series Switches Hardware Installation and Reference Guide Product Overview

- 5 -

External Ports

The RG-S6250-48XS8CQ provides the following ports:

Universal serial bus (USB) port: This port can connect with USB memory to save logs, host versions, warnings

and other diagnostic messages. Therefore, it is more convenient to upgrade the software version of the switch on

line and save the log information.

To protect the data and avoid device damage, use qualified USB flash disks of good brands. At the same time, the

local USB port is compatible with most of the USB controllers except some USB flash disks.

RG-S6250-48XS8CQ series switches support debugging, configuration, maintenance, management and host

software uploading of Console ports.

Console port: Use RS-232 interface electrical level and standard RJ45 connector. This interface is connected with

the serial port of terminal PC to perform system debugging, configuration, maintenance, management, and host

software uploading.

MGMT port: This is an out-band Ethernet port, which uses standard RJ45 connector. This interface is connected

with Ethernet port of a PC to perform program downloading.

SFP+ port: There are 48 10G SFP+ ports, which support optical modules and DAC copper cables (1000BASE-X

compatible).

QSFP28 port: There are 8 100G QSFP28 ports, which support optical modules and DAC copper cables. These

ports can also work in 4x10G mode.

Indicator

Panel

Identification

Status

Meaning

Switch status indicator

(Front panel/Back

panel)

Status

Off

The system is not powered up.

Solid red

1) One of the modules of the system fails.

2) There are less than 3 fans.

3) The internal or partial temperature exceeds the

warning working temperature, and the switching

service resets.

Blinking green.

The system is initializing.

Solid green

The system is operational.

Solid yellow

1) The temperature gets to the warning threshold.

2) Only 3 fans are in the position.

3) One of the dual powers is not connected with the

AC power cord.

Switch locator indicator

(Front panel/Back

panel)

Off

Device location is disabled.

Solid blue

Device location is enabled.

MGMT port indicator

MGMT

Off

The port is not connected.

Green

The port is connected at 10M/100M/1000Mbps.

Blinking

The port is transmitting or receiving data.

SFP+ port status

1F-48F

Off

The port is not connected.

Ruijie RG-S6250-48XS8CQ Series Switches Hardware Installation and Reference Guide Product Overview

- 6 -

indicator

Solid green

The port is connected at 10Gbps.

Blinking green

The port is transmitting or receiving data at 10Gbps.

QSFP28 port status

indicator

49F-56F

Off

The port is not connected.

Solid green

The port is connected at 40G/100Gbps.

Blinking green

The port is transmitting or receiving data at

40G/100Gbps.

Power Supply

The RG-S6250-48XS8CQ series switches support power supply the RG-PA550I-F and RG-PA550I-R. The smart power

supply module supports power management, and the host can read input power, input current, and temperature in real

time. The power supply module supports hot swapping.

The RG-S6250-48XS8CQ series switches support 1+1 power supply redundancy. To improve the stability and

reliability of the entire system, it is recommended to configure 1+1 power supply redundancy. When the two power

supply modules work normally, the switch is in the status of current sharing.

It requires at least one power supply module to work normally. Filler panels need to be installed in the unoccupied

power supply module slots to ensure ventilation and heat dissipation and avoid dusts.

Heat Dissipation

The working temperature of the RG-S6250-48XS8CQ switches is 0°C to 45°C, or 32°F to 113°F, and the heat

dissipation design needs to ensure the stability, safety and maintainability in such environment. The

RG-S6250-48XS8CQ series switches adopt fan ventilation and forced convection to ensure the device can work

normally in specified environment. Dust the device every three months to avoid blocking the ventilation openings.

The RG-S6250-48XS8CQ supports M1EFAN II-F and M1EFAN II-R and provides fan speed regulation, fan failure

warning, and fan hot swapping.

Figure 1-5 Ventilation and Heat Dissipation of the RG-S6250-48XS8CQ

Figure 1-6 Ventilation and Heat Dissipation of the RG-S6250-48XS8CQ (with M1EFAN II-R installed)

Ruijie RG-S6250-48XS8CQ Series Switches Hardware Installation and Reference Guide Preparation before Installation

- 7 -

Leave sufficient space in the front and at the back of the chassis (at least 20 cm) for ventilation.

It requires at least three fan modules to work normally. Filler panels need to be installed in the unoccupied fan

module slots to ensure ventilation and heat dissipation and avoid dusts.

Power modules and fan modules with different air direction cannot be used together.

2 Preparation before Installation

2.1 Safety Precautions

To avoid body injury and device damage, please carefully read the safety precautions before you install the RG-

S6250.

The following safety precautions do not cover all possible dangers.

2.1.1 Installation Safety

Keep the chassis clean and dust-free.

Do not place the device in walking areas.

Do not wear loose clothes, ornaments or any other things that may be hooked by the chassis during the

installation and maintenance.

Turn off all power supplies and unplug all power cords and cables before the installation or the dismantling.

2.1.2 Removal Safety

Avoid frequent removals after the device is installed.

Turn off all power supplies and unplug all power cords and cables before the installation or the dismantling.

When removing the device, pay attention to the balance and avoid hurting legs and feet or straining the back.

Ruijie RG-S6250-48XS8CQ Series Switches Hardware Installation and Reference Guide Preparation before Installation

- 8 -

When the device is being removed, do not hold the power supply handle or the fan handle for these parts are not

designed for bearing the entire weight of the device. It will cause damage to the device or to your body if you hold

these parts when removing the device.

To reduce the weight of the chassis during the removal, dismantle the extension module, fan module and the

power supply module first.

Install and operate the device in places where removing is restricted.

2.1.3 Electric Safety

Observe local regulations and specifications when electric operations are performed. Relevant operators must be

qualified.

Carefully check any potential danger in the working area, such as ungrounded power supply, unreliable grounding

of the power supply, and damp/wet ground.

Find out the location of the emergency power supply switch in the room before installation. First cut off the power

supply in the case of an accident.

Be sure to make a careful check before you shut down the power supply.

Do not place the device in a damp location. Do not let any liquid enter the chassis.

Any nonstandard and inaccurate electrical operation can cause accidents such as fires or electrical attacks, thus

causing severe, or even fatal damages to human bodies and the devices.

Direct or indirect touch through a wet object on high-voltage and mains supply can bring a fatal danger.

2.1.4 Electrostatic Discharge Damage Precautions

The RG-S6250-48XS8CQ designing gives a great consideration to prevent electrostatic discharge damage and adopts

multiple measures. But if the electrostatic exceeds certain limit, it can still cause great damages to the circuitry and the

device. In networks connected by the RG-S6250-48XS8CQ, the major sources of electrostatic induction are outdoor

high voltage transmission cables, lightening, indoor floor materials and the machine structure.

Pay attention to the following tips:

The device and the floor are well grounded.

Take dust prevention measures in the room.

Maintain an appropriate humidity.

When the pluggable modules of the switch are being installed, wear antistatic wrist strap and make sure the

antistatic wrist strap is well grounded.

Do not use bare hand to directly touch the components and the printed-circuit board (PCB) when the boards are

used.

Use an anti-static shielding bag to properly store the board.

Do not let any clothes touch a circuit board. An antistatic wrist strap can only prevent human static electricity from

damaging the circuit board, but cannot prevent any static electricity on clothes.

2.1.5 Laser Safety

Andere Handbücher für RG-S6250-48XS8CQ Series

Inhaltsverzeichnis

Andere Ruijie Schalten Handbücher

Ruijie

Ruijie Reyee RG-ES126S-P V2 Bedienungsanleitung

Ruijie

Ruijie Reyee RG-NBS7006 Installations- und Betriebsanleitung

Ruijie

Ruijie RG-CS85 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S2600E Series Bedienungsanleitung

Ruijie

Ruijie RG-CS83 Series Bedienungsanleitung

Ruijie

Ruijie XS-S1920 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-N18000-XH Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S5750-H Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6580-48CQ8QC Installations- und Betriebsanleitung

Ruijie

Ruijie RG-NBS1805C-P Bedienungsanleitung

Ruijie

Ruijie RG-IS2712G Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-NBS5200-24GT4XS-P Installations- und Betriebsanleitung

Ruijie

Ruijie RG-NBS3100 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-NBS3100 Series Anleitung zur Verwendung

Ruijie

Ruijie RG-S8600 Series Bedienungsanleitung

Ruijie

Ruijie 5310-E Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-IF2920U-12GT1XS-DC Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-ES1 Series Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-ES105D Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-PF2920-DPBOX-P Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-ES126S-LP Bedienungsanleitung

Ruijie

Ruijie RG-S6150-X Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-NBS Series Bedienungsanleitung

Ruijie

Ruijie RG-S6510-48VS8CQ Installations- und Betriebsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung

Cisco

Cisco Catalyst X4448 Handbuch

Vimar

Vimar 6592 Montageanleitung