Ruijie RG-S6250-48XS8CQ Series Handbuch

Ruijie RG-S6250-48XS8CQ Switch

Hardware Installation and Reference Guide

DocumentVersion:V1.0

Date: 2022.06.09

All rights arereservedin this documentandthis statement.

Any reproduction,excerption,backup,modification,transmission,translationorcommercialuse ofthis document

orany portion ofthis document,inanyform orby anymeans,withoutthepriorwrittenconsentofRuijie Networks

is prohibited.

Trademark and are ownedby RuijieNetworks.

All othertrademarks orregisteredtrademarksmentionedin thisdocumentareownedbytheirrespective owners.

Disclaimer

The products,services,orfeatures you purchaseare subjectto commercial contracts and terms. Someorall of

the products,services or features describedin this documentmaynot be withinthe scopeof your purchase or

use.Unless otherwiseagreedinthecontract,RuijieNetworks does notmakeanyexpress or impliedstatement

or guarantee for the content of this document.

Due to product version upgrades or other reasons, the content of this document will be updated from time to

time.RuijieNetworks reserves the rightto modifythe content of the documentwithoutanynotice or prompt.

This manualis for reference only. Ruijie Networks endeavors to ensurecontent accuracyand willnot shoulder

any responsibilityfor lossesand damagescausedduetocontent omissions,inaccuracies orerrors.

Preface

IntendedAudience

This documentis intendedfor:

Networkengineers

Technicalsupportand servicingengineers

Networkadministrators

Technical Support

RuijieNetworks Website:https://www.ruijienetworks.com/

TechnicalSupportWebsite:https://ruijienetworks.com/support

CasePortal:https://caseportal.ruijienetworks.com

Community:https://community.ruijienetworks.com

TechnicalSupportEmail:service_rj@ruijienetworks.com

Skype: service_rj@ruijienetworks.com

Conventions

1. Conversions

Convention

Description

Bold font

Commands,commandoptions,andkeywords arein bold font.

Italicfont

Arguments for whichyou supplyvalues are in italicfont.

[ ]

Elements in squarebrackets areoptional.

{ x | y | z }

Alternative keywords are grouped inbraces andseparatedby

vertical bars.

[ x | y | z ]

Optional alternative keywords are groupedinbrackets and

separated byvertical bars.

&<1-n>

The argumentbefore thesign (&) can be inputfor consecutive 1- n

times.

Doubleslashesatthe beginningofa lineof code indicate a

commentline.

2. Signs

The signs usedinthis documentare describedas follows:

Warning

An alert that calls attention to importantrules and information thatif not understood orfollowed can resultin

data loss orequipmentdamage.

Caution

An alert that calls attention to essential information thatifnot understood orfollowed can resultin function

failureor performancedegradation.

Note

An alert that contains additional orsupplementaryinformation thatifnot understood orfollowed will notlead to

serious consequences.

Specification

An alert that contains adescription ofproductor version support.

3. Note

The manual offers configuration information (including model, port type and command line interface) for

indicative purposeonly.Incaseofany discrepancyorinconsistencybetweenthemanualandthe actualversion,

the actualversionprevails.

Hardware Installation and Reference Guide Product Overview

- 4 -

1 Product Overview

RG-S6250-48XS8CQis a high density10GE/25GEdatacenteraccess switch,featuring10GE/100GEaccess,lowlatency,

and completedatacenterfeatures.RG-S6250-48XS8CQswitch,with upto 48 10GE ports andeight100GE ports,canbe

usedwithS6250-48XS8CQswitchto composeahigh-performanceandhigh-reliabilitydata centernetwork.

Model

100GE

QSFP28

Ethernet

Port

10GE

SFP+

Ethernet

Port

10GBase-T

Ethernet

Port

Expansion

Module Slot

Fan

Redundancy

Power Supply

Redundancy

RG-S6250-

48XS8CQ

N/A

3+1

1+1

An SFP+ port is compliantwith10Gbase-Rand backward compatible with 1000base-X.

A QSFP28 port supports both100GE/40GEmode and4x 25GE/4 x 10GE mode.

Specifications

Model

RG-S6250-48XS8CQ

CPU

1.2 GHz quad-core processor

BOOT ROM

16 MB

FLASH Memory

8 GB

SDRAM

DDR44 GB (Compatible:8GB)

Expansion

Module Slot

Unsupported

Expansion

Module

Unsupported

Fan Slot

4 (3+1 redundancy.At leastthree fan modulesare required.)

Fan Module

M1EFAN II-F and M1EFAN II-R

Power Supply

Slot

2 (1+1 redundancy)

Power Module

RG-PA550I-F, RG-PA550I-R, RG-PD800I-F, and RG-PHD550I-F

Power Supply

Input

AC input

Rated voltage range: 100 V AC to 240 VAC

Maximum voltage range: 90 V AC to 264V AC

Frequency: 50 Hz to 60 Hz

Rated current: 3.5 Ato 7.2A

HVDC input

Rated voltage range: 192 V DC to 288 V DC

Rated current: 3.6 A

HVDC input

Rated voltage range: 180 V DC to 400 V DC

Rated voltage: 336V DC

Rated current: 1.7 A

DC input

Rated voltage range: -42V DC to -72 V DC

Rated voltage: -48V DC

Rated current: 23 A

Hardware Installation and Reference Guide Product Overview

- 5 -

Power

Consumption

Less than 300W

Optical Module

Refer to Appendix.

The supported module type is subject to change without prior notification. Contact Ruijie

Networks for details.

SFP+ Port

Supported

QSFP28 Port

Supported

FC Port

Unsupported

10GBASE-T Port

Unsupported

Temperature

Alarming

Temperature alarming andover-temperatureprotection.

EMC Standards

GB9254-2008CLASS A

Safety Standards

GB4943-2011

Working

Temperature

0°Cto 45°C (32°F to 113°F)

Storage

Temperature

–40°C to +70°C(–40°F to +158°F)

Working Humidity

10% to 90%RH (non-condensing)

Net Weight

8 kg (17.64 lbs., with4 fan modules and2 powermodules)

Dimensions

(W x D x H)

442mmx 387mmx 44 mm(17.40 in. x 15.24 in. x 1.73 in.), 1 RU

RG-S6250-48XS8CQ switch is a class A product. Operation of this equipment in a residential environment could

causeradiointerference,in which casethe usermayberequiredto take adequatemeasures.

The 10GE/100GE Ethernetport of the RG-S6250-48XS8CQswitchsupports DAC.For details,see Appendix.

Product Appearance

RG-S6250-48XS8CQhardware includes achassis,a powersupplysystem and aheat dissipationsystem.

Power supplysystem:Provides two power supplyslots,supporting1+1powersupplyredundancy. You areadvised

to configurepowersupplyredundancy.

Heatdissipation system:Provides fourfanmoduleslots,supporting3+1 fan redundancy.You are advised to configure

all fans to implementredundancy.

Figure 1-1 RG-S6250-48XS8CQSwitch Appearance

Hardware Installation and Reference Guide Product Overview

- 6 -

Front Panel

Figure 1-2 Front Panel

1. System Status LED

2. LocatorLED

3. SFP+ Port

4. SFP+ Port LED

5. QSFP28 Port

6. QSFP28 Port LED

The S6250-48XS8CQswitchsupports the100GEQSFP28 moduleand 10GESFP+ module.

Back Panel

Figure 1-3 Back Panel

1. PowerModule Slot

2. Fan Module Slot

3. LocatorLED

4. MGMT Port

5. USB 2.0 Port

6. GroundingStud

7. AssetTag

8. System Status LED

9. Console Port

Asset Tag

Hardware Installation and Reference Guide Product Overview

- 7 -

The assettag is inthe bottom rightcornerof theback panel.The tag is movable and can be removed from the switch.You

can markthe informationsuchas assetname,category, codeandregistration dateonthe tag for inventory control.

Figure 1-4 AssetTag

Ports

The RG-S6250-48XS8CQswitchprovides the followingports:

Universalserial bus (USB)port:This port is connected witha USB flashdrive to save logs,software version,alarm

and other diagnosismessages.

To protect dataand avoid equipmentdamage,use aqualifiedUSBflash drive.The USB portis compatiblewithmost

USB flashdrives and mayfail to identify somebrands.

The RG-S6250-48XS8CQ switch supports commissioning, configuration, maintenance, management and program

uploadingthrough theconsoleport.

Console port:The consoleportis an RS-232 port that uses anRJ45connector.This port is usedto connecta PC

directlyto the switch for commissioning,configuration,maintenance,managementand program loading.

MGMT port:This is an out-bandEthernet port that uses anRJ45connector.This port is connectedto an Ethernet

port of a PC for program downloading.You can manage andmaintain the switchremotelybyconnecting the

managementportto the Ethernet port of a PC with an Ethernet cable.

SFP+ port: There are 48 10GE SFP+ ports,which supportoptical transceivers andDAC cables (1000BASE-X

compatible).

QSFP28 port: Thereare eight100GE QSFP28 ports,which supportoptical transceivers and DAC cables.These

ports can also workin 4 x 10GE mode.

LED

Panel

Identification

Status

Meaning

System Status LED

Status

Off

System is not powered on.

Asset Tag

Hardware Installation and Reference Guide Product Overview

- 8 -

(front panel/back

panel)

Solidred

1. System or any module fails.

2. The chassisis equippedwithless thanthreefan

modules.

3. The temperature exceeds thethreshold,and the

switching service resets.

Blinkinggreen

System is beinginitialized.

Solidgreen

System is operating normally.

Solidyellow

1. The temperature exceeds the threshold.

2. The chassisis equippedwiththreefan modules.

3. One of the dual powers is not connected withthe

AC powercord.

LocatorLED

(front panel/back

panel)

Off

System is not being located.

Solid blue

System is being located.

MGMT Port LED

MGMT

Off

No linkis detectedfor this port.

Green

The port has made a successful 10/100/1000 Mbps

link.

Blinking

The port is sending andreceiving dataat10/100/1000

Mbps.

SFP+ Port LED

1F-48F

Off

No linkis detectedfor this port.

Solidgreen

The port has made asuccessful 10Gbps link.

Blinkinggreen

The port is sending andreceivingdataat 10 Gbps.

QSFP28 Port LED

49F-56F

Off

No linkis detectedfor this port.

Solidgreen

The port has made asuccessful 40/100 Gbps link.

Blinkinggreen

Theportis sending andreceiving dataat40/100 Gbps.

Power Supply

The RG-S6250-48XS8CQswitchsupports powermodulesRG-PA550I-FandRG-PA550I-R. The smartpowermodules

supportpowermanagement.Thesystem canread outputpower, outputcurrent, and temperature in real time. The power

modules supporthotswapping.

The RG-S6250-48XS8CQ switch supports 1+1 power supplyredundancy. To improve the stabilityand reliabilityof

the entire system,you areadvisedtoconfigure1+1 powersupplyredundancy.When bothpowermodulesareworking,

the switchis in the status of current sharing.

At leastone powermodule is required.Ifany slotis unoccupied,installafillerpaneltoenable properairflow.

Heat Dissipation

The workingtemperature ofthe RG-S6250-48XS8CQswitchranges from 0°Cto 45°C(32°F to 113°F).The heat

dissipationdesignneeds toensure equipmentstability,safety and maintainabilityinsuch an environment.TheRG-

S6250-48XS8CQswitchadopts fan ventilation and enforcedconvection to ensure the equipmentcanworknormallyin

the specifiedenvironment.Dustthe equipmentevery threemonths toavoid blocking the ventilation openings.

The RG-S6250-48XS8CQswitchsupports fanmodulesM1EFAN II-F and M1EFAN II-R. The fan modulesfeature speed

regulation,failure alarming,and hot swapping.

Figure 1-5 Airflow Direction

Hardware Installation and Reference Guide Product Overview

- 9 -

Maintain a minimum clearance of20cm (7.87 in.) aroundthe chassisforventilation.

At least three fan modules are required. If any slot is unoccupied, install a filler panel to enable proper airflow and

avoid dust.

The powermodules andfan moduleswithdifferentairflow directions cannotbeused together.

Andere Handbücher für RG-S6250-48XS8CQ Series

Inhaltsverzeichnis

Andere Ruijie Schalten Handbücher

Ruijie

Ruijie RG-N18000-E Series Installations- und Betriebsanleitung

Ruijie

Ruijie S5750 Series Bedienungsanleitung

Ruijie

Ruijie Reyee RG-NBS6002 Installations- und Betriebsanleitung

Ruijie

Ruijie RG-N18000-XH Series Installations- und Betriebsanleitung

Ruijie

Ruijie XS-S1960-10GT2SFP-P-H Installations- und Betriebsanleitung

Ruijie

Ruijie RG-CS83 Series Bedienungsanleitung

Ruijie

Ruijie RG-S6520 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S2928G-E Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6000C-48GT4XS-E Installations- und Betriebsanleitung

Ruijie

Ruijie RG-NBS3100 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RGOS 11.X Bedienungsanleitung

Ruijie

Ruijie RG-ES100 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S5000-E Series Anleitung zur Verwendung

Ruijie

Ruijie RG-NBS3100 Series Anleitung zur Verwendung

Ruijie

Ruijie S8600E Series Betriebsanleitung

Ruijie

Ruijie RG-S3250E Series Bedienungsanleitung

Ruijie

Ruijie RG-S6120 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-ES126S-P Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S7800C Series Installations- und Betriebsanleitung

Ruijie

Ruijie 5310-E Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-S6580-48CQ8QC Installations- und Betriebsanleitung

Ruijie

Ruijie RG-NBS5100 Series Installations- und Betriebsanleitung

Ruijie

Ruijie RG-ES1 Series Installations- und Betriebsanleitung

Ruijie

Ruijie Reyee RG-NBS5100-24GT4SFP-P Installations- und Betriebsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

SICK

SICK i17S Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung

Cisco

Cisco Catalyst X4448 Handbuch

Vimar

Vimar 6592 Montageanleitung