Russell Hobbs 14447 Bedienungsanleitung

instructions

Read the instructions and keep them safe. Pass them on if you

pass the carving knife on. Remove all packaging, but keep it

till you know the knife works.

important safeguards

Follow basic safety precautions, including:

1 This knife must only be used by a responsible adult. Use

and store the knife out of reach of children.

2 Don’t put the handle, cable, or plug in water or any

other liquid. Don’t use the knife in the bathroom,

near water, or outdoors.

3 Don’t use the knife in the presence of children. Their

movements are unpredictable. They may jog your arm or

bump into you accidentally.

4 The safety lock will prevent accidental operation. Don’t try

to jam it in place.

5 Don’t try to cut bone. The blades may slip and cause

serious injury. You may also damage the blades.

6 The blades are extremely sharp, don’t leave

them lying around where they may be touched

accidentally by you or anyone else.

7 After use, clean the blades, replace them in their protective

sleeve, and store them out of reach of children.

8 Unplug the knife before attaching or removing blades and

before cleaning.

9 Don’t use the other hand to steady the food being cut. Use

a carving fork.

10 Don’t apply pressure to the knife and don’t use a sawing

action. Simply guide the knife through the food, letting the

motor do all the work.

11 Finished? – ﬁrst unplug the knife, then remove the blades.

12 Don’t leave the knife unattended while it’s plugged in, or

while the blades are attached.

13 Route the cable so it doesn’t overhang, and can’t be

tripped over or caught.

14 Use a cutting board to avoid damage to the blades and to

the work surface.

17 Keep the knife and the cable away from hotplates, hobs or

burners.

18 Don’t run the motor for more than 7 minutes, or it may

overheat. After 7 minutes, switch oﬀ for at least 5 minutes,

to let the motor cool.

19 Don’t ﬁt accessories unless we supply them.

20 Don’t use the knife for any purpose other than those

described in these instructions.

21 Don’t use the knife if it’s damaged or malfunctions.

22 If the cable is damaged, return the knife, to avoid hazard.

household use only

preparation

1 Clear a space on the work surface so the cable can’t catch

anything, and the knife can’t hit anything while in use.

2 Route the cable so it doesn’t overhang, and can’t be

tripped over or caught.

3 Put the cutting board on the work surface and have the

carving fork within easy reach.

4 Remove all packaging from the food. Don’t use the knife to

cut the packaging, you may damage the blades.

5 Put the food on the cutting board.

6 Keep the protective sleeve on the blades.

7 Hold the blades by the ﬁnger grips.

8 Insert the free ends of the blades into the slot on the front

of the handle and push gently until they click into place.

9 Lay the knife down on or near the cutting board.

10 Remove the protective sleeve from the blades.

11 Put the plug into the power socket.

12 Steady the food with the carving fork.

13 Hold the knife by the handle, with your foreﬁnger on the

safety lock/switch.

14 The safety lock is there to prevent accidental operation.

Don’t try to jam it in place.

15 The switch is spring-loaded, the knife will operate only

while it is pressed in.

cutting

16 Squeeze the safety lock to unlock the switch.

17 Slide the switch towards the handle, to start the blades.

18 Cut away from your body.

19 Use a carving fork to steady the food being cut – don’t use

your other hand.

20 Don’t try to reposition the food while you’re holding the

knife.

21 If you have to reposition the food, release the switch, set

the knife down, move the food, steady it with the carving

fork – then pick up the knife and start again.

22 When you ﬁnish, or if you need to stop cutting to do

anything else, release the switch, set the knife down, and

unplug it.

23 Don’t run the motor for more than 7 minutes, or it may

overheat. After 7 minutes, switch oﬀ for at least 5 minutes,

to let the motor cool.

cleaning the blades

28 One of the blades has a “keyhole”

slot, the other is ﬁtted with a rivet.

To separate the blades, slide the

rivet along the slot to the large hole.

29 Wash the blades in hot soapy water, rinse, dry thoroughly,

then rejoin them and replace them in their protective

sleeve.

30The blades are very sharp, don’t leave them where they

may be touched accidentally by you or anyone else.

31 The blades are dishwasher safe.

cleaning the handle

32 Wipe the handle with a soft cloth dampened with a small

amount of proprietary disinfectant.

33 Don’t put the handle in liquid.

34Don’t use harsh or abrasive cleaning agents or solvents.

cutting meat

35 Cut across the grain. Although cutting along the grain will

give bigger slices, they’ll tend to be tough and stringy.

removing the blades

24 Release the switch, set the knife down, and unplug it.

25 Hold the handle of the knife, and press the blade release

button 5.

26 Keep your ﬁngers away from the edges of the blades.

27 Hold the blades by the ﬁnger grips and gently pull them

out of the slot.

leg of lamb/pork/ham

36Lay the leg on its side and steady it with

the carving fork.

37 Make one cut right down to the bone.

38Slice alternately on either side of this cut,

tilting the knife gradually to increase the

size of the slices.

39Turn the leg over and do the same to the other side.

sirloin

40 Cut along the bone from the

backbone down the rib.

41 Carve thin slices vertically down

towards the bone.

42 Turn the joint over and do the same

to the other side.

chicken

43 Pull oﬀ the leg, wing and thigh.

44 Holding the knife at an angle, slice

downwards from the breastbone.

45 Turn the chicken and do the same to

the other side.

connection

This product doesn’t need an earth. It has a 13A BS1362 fuse

in a 13A BS1363 plug. To replace the plug, ﬁt the

blue wire to N, and the brown wire to L. Fit the

cord grip. If in doubt, call an electrician.

Don’t use a non-rewireable/moulded plug

unless the fuse cover is in place. If you remove

the plug, dispose of it.

service

If you ring Customer Service, please have the Model No. to

hand, as we won’t be able to help you without it. It’s on the

rating plate (usually underneath the product).

The product isn’t user-serviceable. If it’s not working, read

the instructions, check the plug fuse and main fuse/circuit

breaker. If it’s still not working, consult your retailer. If that

doesn’t solve the problem:

Pack carefully, with a note of your name, address, day phone

number, and what’s wrong. If under guarantee, say where and

when purchased, and include proof of purchase (till receipt).

Send it to Customer Returns (address below right).

Customer Service Customer Returns

(correspondence only) Salton Europe Ltd

Salton Europe Ltd Heath Mill Road

Failsworth Wombourne

Manchester Wolverhampton

M35 0HS WV5 8AQ

Customer Service (serv[email protected])

telephone 0845 658 9700 (local rate number)

guarantee

Defects aﬀecting product functionality appearing within one

year of purchase will be corrected by replacement or repair

provided the product is used and maintained in accordance

with the instructions. Your statutory rights are not aﬀected.

Documentation, packaging, and product speciﬁcations may

change without notice.

online

www.russellhobbs.co.uk for more products.

439-809

Inhaltsverzeichnis

Andere Russell Hobbs Zubehör Handbücher

Russell Hobbs

Russell Hobbs RHESB6001 Bedienungsanleitung

Russell Hobbs

Russell Hobbs RHCLRF17-EU Bedienungsanleitung

Russell Hobbs

Russell Hobbs RH4CLR1001 Bedienungsanleitung

Russell Hobbs

Russell Hobbs RH32DZWC1 Bedienungsanleitung

Russell Hobbs

Russell Hobbs RH8WC2 Bedienungsanleitung

Russell Hobbs

Russell Hobbs RHESB8001 Bedienungsanleitung

Russell Hobbs

Russell Hobbs RHBC48 Bedienungsanleitung

Russell Hobbs

Russell Hobbs RH12WC3 Bedienungsanleitung

Russell Hobbs

Russell Hobbs RHEK600 Installationsanleitung

Russell Hobbs

Russell Hobbs RH8WC2-SB Bedienungsanleitung

Beliebte Zubehör Handbücher anderer Marken

Hillco

Hillco 2810 Bedienungsanleitung

Siemens

Siemens QSA2700D Bedienerhandbuch

Contours

Contours ZY024 Bedienungsanleitung

Saivod

Saivod VS621 Bedienungsanleitung

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Bedienungsanleitung

Z-Wave

Z-Wave HSD-200Z Bedienungsanleitung

turck

turck FMX-IM-2UPLI63FX Bedienungsanleitung

Decagon Devices

Decagon Devices 10HS Bedienungsanleitung

UPPAbaby

UPPAbaby Cup Holder Bedienungsanleitung

Elko

Elko SmartSensor Leakage Wireless Bedienungsanleitung

Grizzly

Grizzly H8371 Bedienungsanleitung

Panasonic

Panasonic HG-T Series Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 250 Series Referenzhandbuch

Virtuox

Virtuox VirtuCLEAN 2.0 Bedienungsanleitung

DigiDesign

DigiDesign 888/24 I/O Bedienungsanleitung

PROZIS

PROZIS QUAY Bedienungsanleitung

patagonia

patagonia PSI Vest Bedienungsanleitung

SFC Energy

SFC Energy EFOY GO! Bedienungsanleitung