Rydeen BSS2 Bedienungsanleitung

Owner’s Manual BSS2

Microwave Radar Blind Spots System

Version 2.1

Table of Contents

I. Items List ............................................................................................................................2

II. Technical Specification........................................................................................3

III. Installation Diagram............................................................................................4

IV. Wire Connection Diagram...................................................................................4

V. Installation Guide................................................................................................5

VI. Alert Conditions ..................................................................................................9

VII. How does it alert...............................................................................................10

VIII. Troubleshooting ................................................................................................11

IX. Technical Support Info. .....................................................................................11

X. Limited Warranty ..............................................................................................12

XI. To Obtain Warranty Service ..............................................................................12

I. Items list

Number

Item Name

Quantity

Picture

Main Unit

1PCS

Main Harness

+ Extension Cable

1SET

Radar Sensor

2PCS

LED Indicator (BLACK LED’S?)

2PCS

GPS Antenna

1PCS

Buzzer

1PCS

Puck Bracket

2PCS

Installation Angle Tool

1PCS

II. Technical specification

Sensor Operating Frequency

24GHz

Transmit Power

15dbm

Detection Area Range

1feet - 35 feet

Detection Ability

5 targets can be detected at the same time

Detection Speed Range

0.5mph---137mph

Speed Accuracy

< 0.5mph

Speed Restriction

1. There are 4 speed restriction options; 5 mph, 10 mph, 15

mph, 20 mph. Default is 20 mph.

Please see below (1-4 switch, it could control 4 speed

restriction) switch 1 =5 mph, switch 2=10 mph, switch 3=15

mph, Switch 4=20 mph

2. If no GPS signal is detected or satellites not found, the

system will be active at any speed

Direction of Movement

Approached or overtaken by vehicles

Operating Voltage

9---18V

Waterproof (Radar Sensor)

Radars: IP67 / Cables: NOT waterproof

Working Current

< 200mA

Working Temperature

-20℃ --- +70℃

Installation Angle

20°(Horizontal)

Gain

12k

Dip switch aligns with the

casing and use QC pass

sticker to cover it.

III. Installation Diagram

IV. Wire Connection Diagram

V. Installation Guide

Radar Pucks Installation

Installation requirements: sensors should be adhered to the inner corner of the bumper with

supplied Velcro. The angle should be between 20 to 25 degrees with the height ranging from

13-35 inches. (Fig.1-Fig.2)

OR use provided mounting bracket for vehicle side installation. (Page. 7)

Fig.1 Fig.2

Step1: Measuring method: Measure the rear bumper using the angle gauge to locate the 20 to 30

Degrees angle. (Fig.3-Fig.4)

The microwave sensors are only intended for plastic bumpers vehicles.

Please note the BSS2 is NOT applicable metal bumpers.

Fig.3

Fig.4

The angle of the

Microwave radar

sensors is between

20 to 25 Degrees.

Step2: Locate the desired position for the radar pucks. (Fig.5 - Fig.6)

Step3: Remove the rear bumper to clean the surface for the radar pucks. (Fig.7)

Fig7

Step4: Place the provided Velcro (To Help Absorb Vibration) on the surface of the

sensors (black side) and the desired location on the bumper (See image below).

Fig.8 Fig.9

Fig.5

Fig.6

Make sure the surface is

clean before Velcro

placed with sensors.

Mounting Radar Pucks with Provided Adjustable Brackets

Use Angle Tool to Set Proper Angle

Installation of the left and right turn signals. (Please make sure not shared with Brake Lamp)

Step 5. Using the voltage multi-meter, locate the left and right turn signal trigger wires behind the

tail lamp. Once verified, connect the left and right signal wires of the BSS2 wire harness to the

correct signal wires. (Fig10, Fig11, Fig12) (Please make sure not shared with Brake Lamp)

Fig10 Fig11 Fig12

LED indicator installation:

Step 6. Place the LED indicators where it is visible for the driver. Ideally on the A-pillar of vehicle.

Fig.13 Fig.14

Adjustable Speaker Installation

Step 7. While installing the speaker, make sure not to obstructed Speaker by any panels. There is

a low, high, and off setting. (Fig.15)

Fig.15

VI. Alert conditions:

1. When the vehicle is on, the system would start detecting objects in the blind area in the lane

next to and behind your vehicle at 35 feet. (Fig.16)

2. When vehicles are approaching, and their speed is faster than our own speed.

Fig.16

Note

Illumination of the LED indicator on the control box:

1. The LED comes on solid when the system is first powered up;

2. The LED blinks slowly while GPS module is connected to the satellites;

3. The LED blinks quickly while sensing moving objects that are approaching in the blind spot

(same frequency as to the alarm LED indicators & the buzzer);

4. The LED maintains the last blinking status after the alerts have ended (the last blinking status of

alarming is off / on randomly)

Inhaltsverzeichnis

Andere Rydeen Autozubehör Handbücher

Rydeen

Rydeen CM-T1000P Bedienungsanleitung

Rydeen

Rydeen BF-450PM Bedienungsanleitung

Rydeen

Rydeen MD4BT Bedienungsanleitung

Rydeen

Rydeen MV332S Bedienungsanleitung

Rydeen

Rydeen BSS3 Bedienungsanleitung

Rydeen

Rydeen CM-AHD1 Bedienungsanleitung

Rydeen

Rydeen BM500S Bedienungsanleitung

Rydeen

Rydeen MV311T Bedienungsanleitung

Rydeen

Rydeen MV311S Bedienungsanleitung

Rydeen

Rydeen DG240 Bedienungsanleitung

Rydeen

Rydeen 360 VIEW Bedienungsanleitung

Rydeen

Rydeen MV437FL Bedienungsanleitung

Rydeen

Rydeen MV432T Bedienungsanleitung

Rydeen

Rydeen rdv360II Bedienungsanleitung

Rydeen

Rydeen BSS3 Bedienungsanleitung

Rydeen

Rydeen SV747HD Bedienungsanleitung

Rydeen

Rydeen BL-422P Bedienungsanleitung

Rydeen

Rydeen BB-400PM Bedienungsanleitung

Rydeen

Rydeen BP1 Bedienungsanleitung

Rydeen

Rydeen BSS1 Bedienungsanleitung

Rydeen

Rydeen PSR4000D Bedienungsanleitung

Rydeen

Rydeen TOMBO ProKit Bedienungsanleitung

Beliebte Autozubehör Handbücher anderer Marken

James Baroud

James Baroud Odyssey Bedienungsanleitung

Motorola

Motorola i50sx Bedienungsanleitung

Yakima

Yakima 9MM STANDARD BIKE MOUNT Bedienungsanleitung

Feniex

Feniex T3 Bedienungsanleitung

Renault

Renault 77 11 423 180 Bedienungsanleitung

Kia

Kia E8300-4D000 Bedienungsanleitung

Brink

Brink 756843 Bedienungsanleitung

Whispbar

Whispbar K085W Bedienungsanleitung

v.link

v.link CI-VL2-PC-HSD Bedienungsanleitung

Viking

Viking Stack-Rack Kurzanleitung zur Einrichtung

Aries

Aries 203015 Bedienungsanleitung

Choetech

Choetech AT0005 Bedienungsanleitung

ZZ2

ZZ2 ZZAIR-PRO Bedienungsanleitung

Holman

Holman 4A80L Bedienungsanleitung

Thule

Thule 2075 Bedienungsanleitung

Motorola

Motorola T325 Bedienungsanleitung

TAUBENREUTHER

TAUBENREUTHER 16-3950 Installationsanleitung

DV8

DV8 FBJL-02 Bedienungsanleitung