2XL-AS20015BM-en-US Rev E · 2022-10-05 · Amendments and Errors Reserved · © SAF-HOLLAND, Inc., SAF-HOLLAND, HOLLAND, SAF,
and logos are trademarks of SAF-HOLLAND S.A., SAF-HOLLAND GmbH, and SAF-HOLLAND, Inc.
Contents
Contents Page Contents Page
Introduction......................................................................... 2
Warranty.............................................................................. 2
Notes, Cautions, and Warnings............................................. 2
Section 1 – General Safety Instructions ................................ 3
Section 2 – Tire Pilot Plus Identification................................ 4
Section 3 – Installation Instructions ..................................... 5
Section 4 – Multi-Axle Trailer Installation........................... 11
Section 5 – System Inspection ........................................... 12
Section 6 – Performance Testing......................................... 12
Section 7 – Electronic Regulator Assembly Mobile APP....... 13
Section 8 – Troubleshooting ............................................... 14
Introduction
This manual provides information necessary for the installation
of the SAF-HOLLAND Tire Pilot Plus tire inflation system.
The Tire Pilot Plus uses air drawn from the tractor to
pressurize the system.
Read this manual in its entirety before installing this product.
Updates to this manual, which are published as necessary, are
available on the internet at www.safholland.us.
When replacement parts are required, SAF-HOLLAND highly
recommends the use of only SAF-HOLLAND Original Parts. A
list of technical support locations that supply SAF-HOLLAND
Original Parts and an Aftermarket Parts Catalog are available
on the internet at www.safholland.us or contact Customer
Service at 888-396-6501.
Warranty
Refer to the complete warranty for the country in which
the product will be used. A copy of the written warranty is
included with the product or available on the internet at
www.safholland.com.
Notes, Cautions, and Warnings
Before starting any work on the unit, read and understand all
the safety procedures presented in this manual. This manual
contains the terms “NOTE”, “IMPORTANT”, “CAUTION”, and
“WARNING” followed by important product information.
These terms are defined as follows:
NOTE: Includes additional information to enable accurate
and easy performance of procedures.
IMPORTANT: Includes additional information that
if not followed could lead to hindered
product performance.
Used without the safety alert symbol,
indicates a potentially hazardous
situation which, if not avoided, could
result in property damage.
Indicates a potentially hazardous
situation which, if not avoided, could
result in minor or moderate injury.
Indicates a potentially hazardous
situation which, if not avoided, could
result in death or serious injury.
