Sage Precision Brewer SDC400 Bedienungsanleitung

SDC450SDC400

the Sage Precision Brewer®

EN QUICK GUIDE

Components

A. Tank lid

B. Water tank

C. Water lter

D. Water lter adapter

E. LCD display

F. SELECT dial

G. START / CANCEL button

H. AUTO START button

I. Brew basket

J. Showerhead

K. Showerhead ring

L. Drip stop lever

M. Carafe lid

N. Carafe

Rating Information SDC450

220‑240V ~50‑60Hz 1550‑1760W

ACCESSORIES

A. Cone lter basket insert

B. Mesh basket lter

C. Sage® coee measuring scoop

D. Water hardness test strip

(see page 8 for directions)

E. Flat bottom basket lter paper pack

(10 pieces)

Rating Information SDC400

220‑240V ~50‑60Hz 1550‑1850W

Operation

WATER HARDNESS SETTING

& FLUSHING

1. Ensure that the empty co ee basket and empty

carafe (with lid attached) are inserted into

the machine.

2. Fill the water tank with fresh cold water to

the MAX mark on the water tank. Plug into

power outlet.

3. When  rst turned on, the machine will show

‘SEt HArdnESS’ on LCD, asking you water

hardness level. Press SELECT dial once. Dip

the water hardness test strip into the  lled water

tank for 1 second. Remove and wait 1 minute to

reveal the result.

4. Rotate SELECT dial until the corresponding

test result is shown on the screen. Press to set.

5. Install the water  lter into the water tank before

continuing to the  ush cycle.

6. The machine will show ‘FLUSH Unit’ on LCD.

Press SELECT dial to commence  ush cycle.

The machine will dispense all the water from

the tank, through the system and into the empty

carafe. After  ushing, empty the basket and

carafe.

INSTALLING THE WATER FILTER

This product is designed to be used with a water

 lter installed in the water tank. Not doing so will

a ect the internal components and performance of

the appliance.

The  lter cartridges should be replaced regularly;

when indicated on the LCD screen.

NOTE

All water tank levels will be incorrect if the machine

is used without the water  lter correctly installed.

1. Remove the water  lter and water  lter adapter

from the packaging.

2. Soak the  lter in cold water for 5 minutes.

3. Attach water  lter to adapter.

4. Insert the assembled water  lter and adapter

into the water tank.

5. Fill the water tank with cold water to the

indicated MAX marking.

BREWING A CARAFE

1. Select the correct basket and  lter to suit the

amount of co ee being brewed.

2 - 8 CUPS 8+ CUPS

8+ CUPS

CAUTION

Filling the basket without a mesh basket  lter

or  lter paper may cause the basket to over ow

during the brewing cycle.

2. Fill the water tank with fresh cold water up to

the MAX marking on the water tank.

450

MLSCUPS

6004

150

300

12008

1800

900

1500

MAX

SINGLE CUP

COLD BREW

MAX

CARAFE

MAX

CONE

NOTE

This machine will brew all the water in the tank.

Ensure the tank is not  lled past the indicated MAX

marking.

3. Grind enough co ee beans for the volume of

co ee being brewed. For a full 12 cup carafe,

we recommend (108g) of co ee, approximately

13 level Sage®measuring scoops. Roughly

1 scoop for every 150ml.

4. Insert the correct  lter paper, cone or  at

bottom, or mesh basket, into the brew basket.

Add your ground co ee then insert the brew

basket into the machine.

NOTE

Never use both mesh basket  lter and paper  lter

at the same time.

5. Lock the carafe lid onto the carafe and insert

under the drip stop outlet.

CAUTION

The carafe MUST be in place before you brew

with the water level higher than the SINGLE CUP

marking. Otherwise the co ee basket will over ow.

COFFEE/WATER RATIO

We recommend 1 level Sage scoop of co ee grounds per 150ml cup of water. Adjust the amount

according to your individual taste. The maximum capacity for pre-ground co ee is 12 level Sage scoops.

Exceeding this amount may cause the co ee basket to over ow.



(150ml cup) 12345678910 11 12

Scoops of



(8.25g)

(16.5g)

(24.75g)

(33g)

(41.25g)

(49.5g)

(57.75g)

(66g)

(74.25g)

(82.5g)

(90.75g)

(99g)

Water amount 150ml 300ml 450ml 600ml 750ml 900ml 1.05L 1.2L 1.35L 1.5L 1.65L 1.8L

BREW MODES

• FAST: This mode is to deliver the fastest

brewed co ee.

• GOLD (recommended):This mode meets the

criteria for an optimum brew and the gold cup

standard* requirements of ECBC (European

Co ee Brewing Center) using the Cone Filter

basket and water volumes of 1.0L & 1.2L

together with a brew ratio of 60g of co ee to 1.0L

of water.

• STRONG: This brewing mode delivers a stronger

tasting co ee.

• MY BREW: Allows you to customise every

brew setting.

−Bloom Time: Co ee bloom occurs when

hot water hits the ground co ee. This setting

allows you to adjust how long the bloom time

lasts.We recommend 30‑60 seconds.

−Bloom Volume:You can adjust the amount

of water used for blooming by changing this

setting. Ideally, this will be around 10% of the

brew volume.

−Brewing Temp: You can adjust the

temperature of the brew water to suit your

favourite co ee.

−Flow Rate: You can adjust brewing time

to control contact time by adjusting the

water delivery speed.

• POUR OVER: If you are using the Pour Over

Adapter, use this mode. Adapter sold separately.

• COLD BREW:

Due to the long duration (typically 4‑14 hours)

of the brewing process we recommend setting

the machine up overnight.

1. Fill the tank with your desired volume of chilled

water, ensuring this is below the COLD BREW

marking.

2. Remove the basket, and ensure both the cone

insert and mesh basket  lter are removed. Add

a large paper  lter and then co ee at 2-3 times

of regular ratio (approximately 12 scoops for

4 cups). Reinsert the basket into the machine.

3. Remove the lid from the carafe and re‑insert

the carafe.

4. Navigate to the COLD BREW setting

and press START / CANCEL.

NOTE

Always ensure your carafe is empty and clean

before brewing.

NOTE

For the very best tasting co ee we recommend

using a brew ratio of 60g of co ee per 1.0 litre

of water.

6. Rotate the SELECT dial to the desired

mode. Press the START / CANCEL button to

commence brewing.

7. When your co ee is ready, the machine

will beep 3 times then commence counting up

for the TIME SINCE BREW.

FAST

GOLD

SET CLOCK STANDBY

KEEP WARM

EXIT

DESCALE

SOUND

SETTINGS

COLD BREW

MYBREW

POUROVER

STRONG

BLOOM TIME

BLOOM VOL.

BREW TEMP.

FLOW RATE

CUSTOMIZE

CARAFE LID

REMOVE

FILL

AUTO START

TANK!

TIME SINCE BREW

MIN

HEATING BLOOMING BREWING

MAX

NOTE

Never  ll the water tank once the co ee machine

has started a brewing cycle.

3. We recommend using cone  lter basket insert

for single cups.

4. Insert the Cone  lter basket into the brew

basket. Use the alignment marks as a guide.

5. Place a cone shaped paper  lter into the cone

 lter basket.

6. Grind the correct amount of whole bean co ee

for the amount being brewed.

7. Select desired brewing mode.

8. Press START / CANCEL to begin brewing.

AUTO START

Allows you to automatically start brewing

at preset time.

1. Set  lter basket type for the amount

of co ee being brewed.

2. Select your brewing mode.

3. Fill the water tank with enough fresh cold water

for the amount of co ee being brewed.

4. Insert the brew basket with your desired insert

or paper  lter and add ground co ee.

5. Insert the appropriate cup or the carafe with

the lid locked in place into the machine.

6. Press the AUTO START button.

FAST

GOLD

SET CLOCK STANDBY

KEEP WARM

EXIT

DESCALE

SOUND

SETTINGS

COLD BREW

MYBREW

POUROVER

STRONG

BLOOM TIME

BLOOM VOL.

BREW TEMP.

FLOW RATE

CUSTOMIZE

CARAFE LID

REMOVE

FILL

AUTO START

TANK!

TIME SINCE BREW

MIN

HEATING BLOOMING BREWING

MAX

7. The machine will prompt you to set the time

for Auto Start. Rotate the SELECT dial to adjust

Auto Start time, press SELECT dial to set.

Auto Start is now set and the machine will

enter Auto Start mode, brewing automatically

at the set Auto Start time.

NOTE

COLD BREW mode will be disabled if there is more

than 4 cups of water in the tank.

SINGLE CUP / SMALLER VOLUMES



1. Your Sage®Precision Brewer will recognise

when the brewer has less than 4 cups of water

and will adjust the brew settings, automatically.

Fill your cup with fresh cold water and then pour

it into the water tank, ensuring the water level

stays below the SINGLE CUP line.

450

MLSCUPS

6004

150

300

12008

1800

900

1500

MAX

SINGLE CUP

COLD BREW

MAX

CARAFE

MAX

CONE

NOTE

DO NOT  ll the water tank above the SINGLE

CUP marking or the volume of the cup being used.

Otherwise it will over ow, as the machine brews until

the water tank is empty.

2. Place your empty cup underneath the brew

basket outlet.

KEEP WARM

*Applicable to the Sage®Precision Brewer™

Glass (SDC400) only.

FAST

GOLD

SET CLOCK STANDBY

KEEP WARM

EXIT

DESCALE

SOUND

SETTINGS

COLD BREW

MYBREW

POUROVER

STRONG

BLOOM TIME

BLOOM VOL.

BREW TEMP.

FLOW RATE

CUSTOMIZE

CARAFE LID

REMOVE

FILL

AUTO START

TANK!

TIME SINCE BREW

MIN

HEATING BLOOMING BREWING

MAX

NEW FILTER

KEEP WARM will be activated automatically for

brew volumes above 4 cups.

• KEEP WARM can be switched o by navigating

the SETTINGS menu to KEEP WARM then

rotate and press SELECT dial to set ON or OFF.

• Keep warm will not engage on cold brew mode

or pour over mode.

CAUTION

The bottom of the carafe is hot to touch for several

minutes after brewing. Use caution and ensure not

to set the carafe on a heat sensitive surface.

CAUTION

Do not place the thermal carafe on the heater plate

when KEEP WARM is activated. It will damage the

insulation.

WARNING

Do not place pour over kit / box on heater plate

when hot.

NOTE

If the clock hasn’t been set, the machine will

prompt you to set the clock. Ensure the clock is

correct.The clock will reset every time the unit is

unplugged.

FAST

GOLD

SET CLOCK STANDBY

KEEP WARM

EXIT

DESCALE

SOUND

SETTINGS

COLD BREW

MYBREW

POUROVER

STRONG

BLOOM TIME

BLOOM VOL.

BREW TEMP.

FLOW RATE

CUSTOMIZE

CARAFE LID

REMOVE

FILL

AUTO START

TANK!

TIME SINCE BREW

MIN

HEATING BLOOMING BREWING

MAX

8. Pressing START / CANCEL will cancel the set

AUTO START time.

SETTINGS

• SET CLOCK: Set the time displayed on LCD.

• DESCALE: Clear mineral build up on internal

components.

• SOUND: Sound volume is adjustable and also

can be turned o .

• STANDBY: Adjust time to automatically enter

STANDBY mode after a period of no use.

• NEW FILTER: Update when a new  lter is

installed in the machine.



To prevent children from possible danger,

child‑lock feature is available. Press and hold

AUTO START for 3 seconds. LCD

will display “CL” when it is locked. Repeat this

again or unplug the unit to unlock.

DEGREE INDICATION PREFERENCE

To switch between C° / F°, press the SELECT dial

and AUTO START button at the same time. Rotate

the SELECT dial to set preference.

REPLACING THE WATER FILTER

1. Remove old water  lter and separate the

adapter from the  lter cartridge. Discard old

cartridge.

2. Soak the new  lter in cold water for 5 minutes.

3. Attach water  lter to adapter. Insert the

assembled water  lter and adapter into the

water tank.

4. Fill the water tank with cold water to the

indicated MAX marking.

5. Navigate the SETTINGS menu and set YES to

the NEW FILTER.

NEW FILTER

Care &

Cleaning

Always turn the co ee machine o and remove the

plug from the power outlet before cleaning.

CLEANING THE COFFEE BASKET

AND MESH BASKET FILTER

Remove the co ee basket. Discard any ground

co ee and  lter paper. The co ee basket and

mesh basket  lter can be rinsed under running

water. Ensure the  ne holes of the mesh basket

 lter are clear. For a deeper clean, wash the co ee

basket and mesh basket  lter in warm, soapy water

with a soft bristled brush.

CAUTION

The co ee basket, mesh basket or paper  lter

may still be very hot after brewing. Use caution and

allow to cool before removing.

CLEANING THE CARAFE

After each use, empty the carafe. Do not let brewed

co ee stand overnight as this can cause the carafe

to stain. Rinse the carafe and carafe lid under warm

running water. For a deeper clean, we recommend

regularly washing the carafe in warm, soapy water

using a soft bristled brush. Do not use abrasive

cleansers, pads or cloths which can scratch the

surface. Rinse and dry thoroughly.

CLEANING THE SHOWERHEAD

Simply wipe down the showerhead area

periodically. However, if a more thorough clean

is required, the Showerhead can be removed by

unlocking the Showerhead Ring. Rotate clockwise

then remove the Showerhead for cleaning. Once

complete, reinstall the Showerhead.

CLEANING THE OUTER HOUSING

The outer housing and LCD screen can be

cleaned with a soft, damp cloth. Apply cleaner to

the cloth and not the LCD surface. Polish with a

soft, dry cloth. Cleaning and drying with dry paper

towels or abrasive cloths and cleaners may scratch

the surface.

REPLACING THE WATER FILTER

The provided water  lter helps prevent scale

build‑up in and on many of the inner functioning

components. Replacing the water  lter when

indicated on the screen or after 3 months will

reduce the need to descale.

DESCALING

After regular use, hard water can cause mineral

build up in internal components, reducing the

brewing ow, brewing temperature, power of the

machine, and taste of the coee.

We recommend to descale regularly. When LCD

shows “DESCALE” (ashing), descaling cycle

is needed but the cycle can be performed at

anytime. Descaler is available on the Sage website.

NOTE

It takes approximately 33 minutes to complete

descaling cycle.

1. Empty the water tank and remove the water

lter.

2. Prepare a descale solution in accordance with

manufacturer’s instructions. Pour this solution

into the empty water tank , do not exceed MAX

marking.

3. Place the basket and the carafe into position

under the drip stop outlet, Ensure the carafe

is empty and the lid is securely locked.

4. Navigate SETTINGS menu to DESCALE.

Press SELECT dial to start the cycle. The time

remaining will display on the LCD.

5. When the descaling process is nished, the

LCD screen will go back to the main menu.

To completely remove residual water in the

tank, brew with fresh water twice. Discard the

water from the carafe and rinse thoroughly.

NOTE

We recommend to brew through again after

descaling to brew out the residue descale solution.

NOTE

You cannot stop the descaling process mid cycle.

Force stop by unplugging the cord from the

power outlet.

FACTORY RESET

This will reset the machine to the factory settings,

including water hardness setting. Hold the START

button, the SELECT button, and AUTO START

button altogether for 3 seconds. When LCD shows

“rES” (ashing), press SELECT button to start.

Rotate between YES or NO and press to conrm.

Andere Handbücher für Precision Brewer SDC400

Inhaltsverzeichnis

Andere Sage Kaffeemaschine Handbücher

Sage

Sage Barista Express BES875 Bedienungsanleitung

Sage

Sage Bambino Plus SES500 Bedienungsanleitung

Sage

Sage the Bambino SES450BSS4GUK1 Bedienungsanleitung

Sage

Sage Barista Express BES875 Bedienungsanleitung

Sage

Sage Oracle Touch Bedienungsanleitung

Sage

Sage Duo-Temp Pro BES810 Bedienungsanleitung

Sage

Sage the Barista Pro BES878 Bedienungsanleitung

Sage

Sage Barista Touch SES880 Bedienungsanleitung

Sage

Sage the Bambino BES450 Bedienungsanleitung

Sage

Sage Barista Express Impress SES876 Bedienungsanleitung

Sage

Sage Precision Brewer SDC400 Bedienungsanleitung

Sage

Sage Oracle Touch SES990 Bedienungsanleitung

Sage

Sage the Bambino SES450 Bedienungsanleitung

Sage

Sage Smart Grinder Pro BCG820 Bedienungsanleitung

Sage

Sage Barista Touch Impress Bedienungsanleitung

Sage

Sage Barista Express Impress BES876 Bedienungsanleitung

Sage

Sage the Dual Boiler BES920 Bedienungsanleitung

Sage

Sage Barista Touch SES880 Bedienungsanleitung

Sage

Sage Barista Touch SES880 Bedienungsanleitung

Sage

Sage the Duo-Temp Pro BES810BSSUK Bedienungsanleitung

Sage

Sage Duo-Temp Pro BES810 Bedienungsanleitung

Sage

Sage Barista Touch Impress Bedienungsanleitung

Sage

Sage the Barist Express SES875 Bedienungsanleitung

Sage

Sage Nespresso Creatista Uno Bedienungsanleitung

Beliebte Kaffeemaschine Handbücher anderer Marken

Taurus

Taurus Livorno 6 Bedienungsanleitung

Delta-q

Delta-q QUICK Bedienungsanleitung

Bunn

Bunn LCA-1 Fehlerbehebungshandbuch

Black & Decker

Black & Decker BLACK DECKER HOME DE790 Montageanleitung

Saeco

Saeco Vienna Plus Sup 018M Bedienungsanleitung

DeLonghi

DeLonghi DC300 Bedienungsanleitung

INCAPTO

INCAPTO BXCO1470E Bedienungsanleitung

Bosch

Bosch TASSIMO finesse TAS16B Series Bedienungsanleitung

Exido

Exido 245-072 Bedienungsanleitung

Animo

Animo OptiVend Choco Bedienungsanleitung

Siemens

Siemens TQ505DF Series Bedienungsanleitung

DeLonghi

DeLonghi ECI341 Bedienungsanleitung

Krups

Krups KT406511 Bedienungsanleitung

Cimbali

Cimbali M32 Classic Bedienungsanleitung

Philips

Philips HL3844N Bedienungsanleitung

Bosch

Bosch TES 515 SERIES Bedienungsanleitung

Tekmatix

Tekmatix TMFM - 65 Bedienungsanleitung

Scarlett

Scarlett SC-CM33005 Bedienungsanleitung