Sakura Tissue-Tek TEC 6 Bedienungsanleitung

Tissue-Tek®TEC™6

Embedding Module

Operating Manual

Part Number M01-021E-02

Revision Letter A

Released 2019-11-07

The brand names of products that have been registered or trademarked by and are owned

by Sakura Finetek USA, Inc., Sakura Finetek Japan Co., Ltd., and Sakura Finetek Europe B.V.

appear here:

Sakura

Tissue-Tek

Please visit our website www.sakura-netek.com

Manufactured for:

Sakura Finetek USA, Inc., Torrance, CA 90501 U.S.A.

Sakura Finetek Europe B.V., 2408 AV Alphen aan den Rijn, NL

Sakura Finetek Japan Co., Ltd., Tokyo, 103-0023, Japan

Manufactured by:

Sakura Seiki Co., Ltd., Nagano, 387-0015, Japan

Printed in Japan.

Table of contents

1. Introduction

1.1 Intended Use…………………………………………………………7

1.2 Safety Precautions …………………………………………………8

1.3 Precautions for Use……………………………………………… 14

1.4 Overview of the Instrument …………………………………… 19

1.4.1 Instrument Conguration ……………………………… 19

1.4.2 Specications …………………………………………… 20

1.5 Accessories ……………………………………………………… 21

1.5.1 Standard Accessories (Embedding Module) ………… 21

1.5.2 Optional Accessories (Embedding Module) ………… 22

1.6 Description of Instrument Parts ……………………………… 23

1.6.1 Instrument (Front Side) ………………………………… 23

1.6.2 Instrument (Rear Side) ………………………………… 24

1.6.3 Control Panel Display …………………………………… 25

2. Installation

2.1 Installation ………………………………………………………… 33

2.1.1 General Information on Installing the Instrument…… 33

2.1.2 Installation Environment………………………………… 33

2.1.3 Unpacking Method of the Embedding Module ……… 34

2.1.4 Installation Method ……………………………………… 38

2.2 Setting Up the Instrument ……………………………………… 41

2.2.1 Temperature Setting for Each Part of the Instrument 41

2.2.2 Setting the Date and Time ……………………………… 44

2.2.3 Setting the Schedule of the Auto Operation (with the

Auto Cryo Mode) ………………………………………… 45

2.2.4 Setting the Display Language ………………………… 47

2.2.5 Setting the Auto Panel Display Off Timer …………… 48

2.3 Operational Overview …………………………………………… 49

2.3.1 Operation Method ……………………………………… 49

3. Explanation of Operations

3.1 Explanation of Operations ……………………………………… 55

3.1.1 Basic Operations ………………………………………… 55

3.1.2 Embedding Process …………………………………… 59

3.1.3 Tasks after Use …………………………………………… 63

3.2 Other Operations ………………………………………………… 64

3.2.1 Various Settings ………………………………………… 64

3.2.2 Melting Parafn Quickly ……………………………… 66

3.2.3 Changing the Parafn Flow Rate ……………………… 67

3.2.4 Turning On/Off the Work Light ………………………… 68

3.2.5 Continuing Embedding after the End Time of Auto

Operation ………………………………………………… 69

3.2.6 Ending the Auto Operation before the End Time …… 70

3.3 Handling of Standard and Optional Accessories …………… 71

3.3.1 Wrist Rest ………………………………………………… 71

3.3.2 Wrist Rest Cushion ……………………………………… 71

3.3.3 Foot Pedal ………………………………………………… 72

3.3.4 Magnifying Lens ………………………………………… 73

4. Error Log

4.1 Error Log ………………………………………………………… 75

4.1.1 Viewing the Error Log …………………………………… 75

5. Troubleshooting

5.1 Troubleshooting ………………………………………………… 77

5.1.1 Instrument Condition and Solution …………………… 77

5.1.2 Message Window………………………………………… 80

5.1.3 What to Do Following a Power Outage ……………… 85

5.1.4 What to Do When the Low Battery Alarm Icon is

Indicated ………………………………………………… 85

5.2 Cleaning…………………………………………………………… 86

5.2.1 Inspection and Cleaning………………………………… 86

5.2.2 Cleaning Each Part of the Embedding Module ……… 86

6. Replacement Parts

6.1 Replacement Parts ……………………………………………… 97

6.1.1 Embedding Module …………………………………… 97

6.2 Service Life and Maintenance ………………………………… 97

7. Glossary of Terms

7.1 Glossary of Terms ……………………………………………… 99

Table of contents

1. Introduction

1.1 Intended Use

The Tissue-Tek®TEC™6 Embedding Module (hereinafter referred to “the

instrument”) is intended to embed processed human or animal tissue

in paraffin by melting solid paraffin and dispensing molten paraffin. This

instrument is used to facilitate as part of steps to produce tissue specimens

for histological studies and tests conducted in the fields of pathology,

anatomy, clinical pathology, etc.

This instrument can be used standalone and also designed for use with the

Cryo Module connected by a control cable.

This document is the Operating Manual for the Embedding Module, but the

procedures to handle the Tissue-Tek®TEC™6 Cryo Module are also provided.

Carefully read this Operating Manual and use the instrument correctly so

that its performance can be utilized fully. Any other use of this instrument is

considered improper operation.

1.2 Safety Precautions

Designate the "Instrument Control Manager."

• Operation of the instrument requires expert knowledge of the target

application, method of use, and so on. Therefore, to use the instrument

correctly and safely, designate an "Instrument Control Manager."

• When the instrument is delivered, the Instrument Control Manager should

receive explanation on the handling of the instrument directly from the

staff trained in the instrument or distributor.

Before using the instrument, read the "Safety Precautions" to ensure the

correct use of the instrument.

The cautionary instructions provided herein are intended to ensure that the

instrument will be used safely in a manner preventing operator from injury and

property damage. These instructions provide important safety information

that must be needed at all times.

In this manual, instructions pertaining to different levels of potential hazards

are classified and indicated respectively as danger, warning, caution and

note.

The denition of each hazard is dened below.

DANGER pertains to a potential hazard where failure to observe the specied

instruction may result in death or serious injury of the user or another person.

WARNING pertains to a potential hazard where failure to observe the

specified instruction may result in a serious injury of the user or another

person.

CAUTION pertains to a potential hazard where failure to observe the specied

instruction may result in damage to the instrument or other property, or affect

the process results.

NOTE pertains to an item to pay attention to or other useful information.

DANGER

WARNING

CAUTION

1. Introduction

The symbols used on the labels attached to the instrument are explained.

The labels bearing one of the following symbols provide particularly important

information you must know in order to ensure safety of the operator, improve

work efficiency and protect the instrument from damage. Be sure to check

these labels and understand the specified instructions before commencing

your work

A label bearing this symbol specifies an action that must be taken. Always

follow the instruction.

A label bearing this symbol specifies a prohibited item. Always follow the

instruction.

A label bearing this symbol specifies a precaution. Wrong handling against

the instruction may potentially expose the operator to danger or damage the

instrument, so be sure to follow the instruction.

A label bearing this symbol is provided near a high-temperature area. Exercise

caution against burns caused by high temperatures.

If any biologically hazardous substance is handled, follow applicable

regulations or guidelines in your country or region to ensure safety.

WARNINGS:

• Follow instructions in this operating manual.

If the instrument is not used properly, it may induce failure of the

instrument, injury to operators, and/or damages to facilities.

• Do not put ammable/explosive substances other than parafn in the

instrument.

When using the instrument, do not put flammable/explosive

substances other than parafn in the areas where parafn is intended

such as the parafn chamber and warming chamber. Doing so may

result in re or explosion.

• Do not move the instrument while molten parafn is inside.

Do not move the instrument while molten paraffin is inside. Before

moving the instrument, unplug the power cord and remove the parafn

inside the instrument or wait for it to cool and solidify. Failure to

follow this instruction may result in the parafn spilling over to cause

burns or contacting with live electrical parts to cause re.

• The instrument, parafn and parafn container become hot.

The paraffin melting part, paraffin and paraffin container in the

instrument become hot. Exercise caution to prevent burns.

• Do not disassemble or modify the instrument.

Do not disassemble or modify the instrument except for the areas

specified in this manual. The instrument may malfunction or cause

accident, thus creating a dangerous situation.

• Do not wet the instrument.

Do not wet the instrument except for the areas specified in this

manual. If the instrument gets wet, electrical current leak may occur

and cause re or electric shock.

• Do not operate the switches with a wet hand.

Failure to observe the instruction may result in electric shock.

• Do not connect/remove the power plug with a wet hand.

Failure to observe the instruction may result in electric shock.

• When connecting/removing the power plug, do so by holding the

plug.

Connecting/removing the power plug by holding parts other than the

plug may cause re or electric shock.

• Do not damage the power cord.

Do not forcibly bend, pull, twist or bundle the power cord. If the

damaged power cord is used, fire or electric shock may occur. If

the power cord or power plug has scratches or other abnormalities,

contact the Sakura instrument distributor or representative.

Andere Handbücher für Tissue-Tek TEC 6

Inhaltsverzeichnis

Andere Sakura Laborausrüstung Handbücher

Sakura

Sakura Tissue-Tek DRS 2000 Bedienungsanleitung

Sakura

Sakura Tissue-Tek Glas g2 Bedienungsanleitung

Sakura

Sakura Histo-Tek VP1 Bedienungsanleitung

Sakura

Sakura Tissue-Tek Prisma Plus Bedienungsanleitung

Sakura

Sakura Tissue-Tek Film Bedienungsanleitung

Sakura

Sakura Tissue-Tek Glas Bedienungsanleitung

Sakura

Sakura Tissue-Tek Prisma Plus Bedienungsanleitung

Sakura

Sakura Cyto-Tek 2500 Bedienungsanleitung

Sakura

Sakura Tissue-Tek Glas g2 Bedienungsanleitung

Sakura

Sakura Tissue-Tek AutoTEC a120 Bedienungsanleitung

Sakura

Sakura Tissue-Tek TEC 6 EM Option Bedienungsanleitung

Sakura

Sakura Tissue-Tek Xpress x120 Bedienungsanleitung

Sakura

Sakura Tissue-Tek Prisma Plus Prisma-P-AD Bedienungsanleitung

Sakura

Sakura Cyto-Tek 2500 Bedienungsanleitung

Sakura

Sakura Tissue-Tek AutoTEC a120 Bedienungsanleitung

Sakura

Sakura 6134 Bedienungsanleitung

Beliebte Laborausrüstung Handbücher anderer Marken

Qiagen

Qiagen DML 3000 Bedienungsanleitung

Queensgate

Queensgate NANOSCAN OP400 Programmierhandbuch

Conviron

Conviron GEN1000-GE Bedienungsanleitung

Parr Instrument

Parr Instrument 4560 Bedienungsanleitung

IKA

IKA IC control Bedienungsanleitung

Integra

Integra DOSE IT Bedienungsanleitung

Agilent Technologies

Agilent Technologies 5800 ICP-OES Bedienungsanleitung

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Bedienungsanleitung

NI PXI-5422 Handbuch

Collomix

Collomix Aqix Bedienungsanleitung

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Bedienungsanleitung

Ocean Insight

Ocean Insight FLAME-NIR+ Bedienungsanleitung

Parker

Parker ALIGN-MG-NA Bedienungsanleitung

BD 644787 Bedienungsanleitung

DENTAURUM

DENTAURUM Compact Megaplus Bedienungsanleitung

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Bedienungsanleitung

VWR

VWR SAS Super IAQ Bedienungsanleitung

illumina

illumina MiSeqDx Bedienungsanleitung