Samson Q2 Bedienungsanleitung

A versatile new addition the the Q

MIC

“family” of

microphones, the Q2 employs a tight unidirectional

cardioid pattern to keep feedback to an absolute

minimum in high SPL vocal and instrument miking

situations. Its high energy Neodymium element pro-

vides maximum gain before feedback along with

superior sound quality and is enclosed on a special

multi-axis shock-mount chassis to reduce handling

noise. Featuring very clear and articulate sound, the

Q2 also incorporates a transformerless design for

extended low frequency response without distortion

and aluminum humbucking voice coil for quieter,

hum-free performance. It is equipped with a switch-

able 10 dB pad for use with high SPL sources and a

12 dB per octave high pass filter to reduce rumble

and other unwanted low end sounds. Manufactured

with the highest quality components, th Q2, like the

popular Qmic, includes a highly distinctive wind-

screen / noise filter that greatly reduces wind noise,

“pops” and excessive sibilance. Additional features

include a gold-plated XLR connector and a special

“Euro” adapter that allows the mic to be easily

mounted onto metric microphone stands.

• High-energy, rare earth Neodymium element

delivers high output and exceptional sound

quality.

• Tight cardioid polar pattern reduces feedback.

• Transformerless design enables mic to reproduce

extended low frequencies with minimal distortion.

• Lightweight aluminum humbucking voice coil

rejects hum and preserves extended range of

high frequencies.

• Vertical porting helps remove standing wave

distortion.

• Switchable 10 dB pad allows use with high SPL

sources such as drums and amplified instruments.

• Switchable 12 dB per octave high pass filter

eliminates stage rumble.

• Triple-plated multi-stage windscreen for quiet

performance.

• Multi-axis shock-mount mic element minimizes

handling noise.

• Sturdy zinc-casting and a silicone “anti dent”

provides additional windscreen protection.

• Foam-lined carry case, mic clip and Euro-metric

mic stand adapter.

•Gold-plated balanced XLR connector.

MICROPHONE

CARDIOID

Samson Technologies Corp., P.O. Box 9031, Syosset, NY 11791-9031 •Phone: (516) 364-2244 •Fax: (516) 364-3888 •www.samsontech.com

Contact:

ARCHITECT’S & ENGINEER’S

SPECIFICATION

The microphone shall be of a dynamic type

with cardioid polar pattern. The microphone

shall provide its output on a gold-plated male

XLR-type connector. Output impedance shall be

600 Ohms.

The microphone shall be constructed of a

zinc casing and shall contain a triple-plated

multi-stage windscreen and noise filter for the

removal of pops, sibilance and onstage noise, an

aluminum humbucking voice coil for the elimi-

nation of magnetic field interference and true

hum rejection, a Neoprene transformer cover

for the reduction of microphonics, a high-out-

put Neodymium element, and a multi-axis

shock-mount to minimize handling noise.

The microphone shall be equipped with a

switchable 10 dB pad for use with high SPL

sources and a 12 dB per octave high pass filter to

reduce rumble and other unwanted low end

sounds. The microphone shall have frequency

response from 50 Hz to 15 kHz, sensitivity of -

71 dBV at 94 dB SPL, and a maximum SPL of

137 dB. Dimensions shall be 1.8″(46 mm) head

length, 4.2″(107 mm) main unit length and 6″

(152 mm) total length. Weight shall be 10.5 oz.

(300 g). The microphone shall carry a three-

year warranty.

The microphone shall be a SAMSON Q2.

Q2 FREQUENCY RESPONSE

-10

-20

-30

-40

(dB)

20 50 100 200 500 1000 2000 5000 10000 20000

Frequency(Hz)

[At HP,ATT switch off]

Measuring Obj.;

SAMSON

0°30°

60°

90°

120°

150°

180°

210°

240°

270°

300°

330°

300Hz

1000Hz

3000Hz Scale is 5 decibels per division

Q2 SPECIFICATIONS

Type: Dynamic

Polar Pattern: Cardioid

Frequency Response: 50 Hz - 15 kHz

Sensitivity (0 dB = 1 V / 0.1pa @ 1 kHz): -71 dB ± 3 dB

Max. SPL 137 dB

Output Impedance (@ 1 kHz): 600 Ω(Lo Z)

High Pass Range: -12 dB/octave (HP switch ON)

Attenuation Range: -10 dB/average (ATT switch ON)

Connector: 3-pin gold-plated balanced XLR male

Connector: 3-pin XLR male

Dimensions: 6″•152mm

Weight: 10.5 oz. •300g

Andere Samson Mikrofon Handbücher

Samson

Samson VR88 Bedienungsanleitung

Samson

Samson G Track Bedienungsanleitung

Samson

Samson CL8 Bedienungsanleitung

Samson

Samson CO1U Bedienungsanleitung

Samson

Samson SE50x Bedienungsanleitung

Samson

Samson LM10x Bedienungsanleitung

Samson

Samson R21 Bedienungsanleitung

Samson

Samson QKICJ Bedienungsanleitung

Samson

Samson MTR231 Bedienungsanleitung

Samson

Samson Go Mic Bedienungsanleitung

Samson

Samson Go Mic Bedienungsanleitung

Samson

Samson Q1 Bedienungsanleitung

Samson

Samson Q4 Bedienungsanleitung

Samson

Samson UB1 Bedienungsanleitung

Samson

Samson DE50 Series Bedienungsanleitung

Samson

Samson Q8x Bedienungsanleitung

Samson

Samson G-Track Pro Bedienungsanleitung

Samson

Samson UB1 Bedienungsanleitung

Samson

Samson Qmic Hypercardioid Bedienungsanleitung

Samson

Samson C01 Bedienungsanleitung

Samson

Samson MTR231 Bedienungsanleitung

Samson

Samson DE10 Bedienungsanleitung

Samson

Samson Q snare Bedienungsanleitung

Samson

Samson C03U Bedienungsanleitung

Beliebte Mikrofon Handbücher anderer Marken

IK Multimedia

IK Multimedia iRig Stream MIC PRO Bedienungsanleitung

DAPAudio

DAPAudio RM-101 Bedienungsanleitung

AKG

AKG CHM 21 Bedienungsanleitung

Sennheiser

Sennheiser evolution wireless series EM 100 Bedienungsanleitung

Sony

Sony C-48 Bedienungsanleitung

GIGAMEDIA

GIGAMEDIA GGM PAMICUHFG Bedienungsanleitung

Shure

Shure WH30TQG Bedienungsanleitung

auna PRO

auna PRO MIC-900 Bedienungsanleitung

AKG

AKG D 3800 Bedienungsanleitung

Shure

Shure KSM141 Bedienungsanleitung

MAIIN SOUND

MAIIN SOUND IIN style Bedienungsanleitung

Earthworks

Earthworks TC25 Bedienungsanleitung

Sennheiser

Sennheiser evolution D1 Bedienungsanleitung

Alesis

Alesis MicLink Wireless Bedienungsanleitung

DSPPA

DSPPA D6234 Bedienungsanleitung

Monacor

Monacor IMG STAGELINE ECM-300B Bedienungsanleitung

Ansr Audio

Ansr Audio Scan16 Bedienungsanleitung

Shure

Shure MXA710 Series Bedienungsanleitung