Samson SADE10X Bedienungsanleitung
DE10x Headset Microphone
Owner’s Manual
2
Copyright 2019, Samson Technologies Corp.
v1.2
278-B Duffy Ave
Hicksville, New York 11801
Phone: 1-800-3-SAMSON (1-800-372-6766)
www.samsontech.com
Other trademarks and trade names are those of their respective owners.
If you want to dispose this product, do not mix it with general household waste. There is a
separate collection system for used electronic products in accordance with legislation that
requires proper treatment, recovery and recycling.
Private household in the 28 member states of the EU, in Switzerland and Norway may return their
used electronic products free of charge to designated collection facilities or to a retailer (if you pur-
chase a similar new one).
For Countries not mentioned above, please contact your local authorities for a correct method of
disposal.
By doing so you will ensure that your disposed product undergoes the necessary treatment, recovery
and recycling and thus prevent potential negative effects on the environment and human health.
3DE10x Headset Microphone
Congratulations on your purchase of the Samson DE10x Headset Microphone. The DE10x is
a low profile, micro-miniature condenser headset microphone with a 3mm capsule. With its
omnidirectional pick up pattern, the DE10x delivers linear off-axis frequency response, resulting
in a clear and articulate sound perfect for house-of-worship, presentation, theater and fitness
applications. The microphone has been specially treated with a water resistant coating providing
extra protection from sweat and other moisture. In addition, there is a moisture guard drip-ring to
further protect the capsule and ensure reliable performance.
The DE10x Headset Microphone is well-suited for use with Samson wireless systems and with four
included adapter cables, the microphone can be used with most popular wireless systems. Other
accessories included in the kit are a clothing collar clip, four windscreens and a carry case that
holds the DE10x and all the accessories.
In the box, you’ll find a registration card enclosed, don’t forget to follow the instructions so that you
can receive online technical support and so we can send you updated information about this and
other Samson products in the future. We recommend you keep the following records for reference,
as well as a copy of your sales receipt.
Serial number: __________________________ Date of purchase: ___________________________
If you have any questions or comments regarding the DE10x Headset Microphone or any other
With proper care and maintenance, your DE10x Headset Microphone will operate trouble-free for many
years. Should your DE10x Headset Microphone ever require servicing, a Return Authorization (RA) number
must be obtained before shipping your unit to Samson. Without this number, the unit will not be accepted.
Please visit www.samsontech.com/ra for an RA number prior to shipping your unit. Please retain the original
packing materials and, if possible, return the unit in its original carton. If your DE10x Headset Microphone
was purchased outside of the United States, contact your local distributor for warranty details and service
information.
Introduction
4
Features
• Headset microphone with 3mm miniature condenser mic capsule
• Low-profile, double ear design with adjustable frame and mic boom
• Ideal for live and broadcast vocal applications
• Omnidirectional pickup pattern
• 20Hz–20kHz frequency response
• Gold-plated connector, moisture-resistant coating and stainless steel mesh grille
• Dust and water/sweat-resistant rated at IP65
• Includes four detachable adapter cables: 1/8” [3.5mm], Hirose® 4-Pin, Switchcraft® TA3F,
Switchcraft® TA4F for compatibility with most popular wireless transmitters
• Four windscreens, collar clip and protective carry case included
5DE10x Headset Microphone
The headset can be re-sized by sliding the
ear hooks to fit snug around your head. If the
DE10x is loose and will not stay in place, slide
the ear hook wires back for a tighter fit.
Adjust the microphone position by holding the
left ear hook wire and slide the boom forward or
back. For optimum performance the microphone
should be close to the skin and towards the
corner of the mouth, approximately a half inch
away.
Position the moisture guard ring as close to the
capsule as possible.
For outdoor use and to help reduce p-popping,
install one of the included windscreens.
Fitting the DE10x Microphone
6
Connector Cables
The DE10x includes four cables with adapters for some of the most popular wireless microphone
beltpack transmitters.
3.5mm Connector
Works with Sennheiser®wireless systems
Hirose®4-Pin Connector
Works with most Audio-Technica®wireless systems
Switchcraft®TA3F Connector
Works with Samson AirLine ATX Series, Concert Series and most AKG®wireless systems
Switchcraft®TA4F Connector
Works with most Shure®wireless systems
7DE10x Headset Microphone
The DE10x includes four cables with connectors to use with the most popular wireless body pack
systems. To connect the cable to the headset:
1. Choose the right cable and connector that
works with your wireless system.
2. Line the cable up to the threaded terminal
on the back of the DE10x and screw the
cable into the headset. Do not over tighten
the cable.
3. Attach the included collar clip on the back
of your shirt collar and run the mic wire
from the DE10x headset to the wireless
body pack. Leave enough cable to allow you
to turn your head from side to side.
Connector Cables
8
Mic Positioning
Position the DE10x microphone element about
0.25” –1” behind the corner of your mouth.
Since the DE10x is an omnidirectional capsule,
the end of the microphone does not need to be
facing your mouth. To avoid breath noise and
p-pops, do not place the microphone directly in
front of your mouth.
If the microphone is too far away from your
mouth you will need to increase the gain and
reduce isolation.
To minimize additional noise, do not locate the
microphone tight against your cheek.
9DE10x Headset Microphone
Specifications
Element Back electret condenser
Polar pattern Omnidirectional
Frequency Response 20Hz–20KHz
Sensitivity -45dBV/Pa @1kHz ±3dB
Output impedance 2kΩ ±30%
Maximum SPL 130dB
Self-Noise 30dB(A)
Dynamic Range 100dB
Operating voltage 1.5–12V DC
Cable: ø1.4mm*1.2m
Weight: 13g
Dimension: ø3mm
Included Adapter Cables 1/8” (3.5mm), Hirose®4-Pin, Switchcraft® TA 3 F,
Switchcraft®TA4F
Accessories: (4) Windscreens, Clothing Collar Clip, Carry Case
At Samson, we are continually improving our products, therefore specifications and images are
subject to change without notice.
10
Specifications
Polar Pattern
Frequency Response
0°
180°
dB
-5
-10
-15
-20
-25
45°
90°90°
135°
45°
135°
20 50 100 200 500
Frequency in Hz
1000 2000 5000 10000 20000 Hz
-20
-10
10
dB
0
Dieses Handbuch passt für folgende Modelle
1
Inhaltsverzeichnis
Andere Samson Mikrofon Handbücher
Samson
Samson MTR201 Bedienungsanleitung
Samson
Samson Q7x Bedienungsanleitung
Samson
Samson C01UPRO Bedienungsanleitung
Samson
Samson Qmic Hypercardioid Bedienungsanleitung
Samson
Samson CM11B Bedienungsanleitung
Samson
Samson G Track Bedienungsanleitung
Samson
Samson CL5 Bedienungsanleitung
Samson
Samson Meteorite Bedienungsanleitung
Samson
Samson Q3 Bedienungsanleitung
Samson
Samson C05 Bedienungsanleitung
Samson
Samson C01UPRO Bedienungsanleitung
Samson
Samson Q1U Bedienungsanleitung
Samson
Samson CM12C Montageanleitung
Samson
Samson UB1 Bedienungsanleitung
Samson
Samson C03U Bedienungsanleitung
Samson
Samson LM10 Bedienungsanleitung
Samson
Samson CM15P Bedienungsanleitung
Samson
Samson Q snare Bedienungsanleitung
Samson
Samson Meteor Mic Bedienungsanleitung
Samson
Samson Meteor Mic Bedienungsanleitung
Beliebte Mikrofon Handbücher anderer Marken
IK Multimedia
IK Multimedia iRig Stream MIC PRO Bedienungsanleitung
DAPAudio
DAPAudio RM-101 Bedienungsanleitung
AKG
AKG CHM 21 Bedienungsanleitung
Sennheiser
Sennheiser evolution wireless series EM 100 Bedienungsanleitung
Sony
Sony C-48 Bedienungsanleitung
GIGAMEDIA
GIGAMEDIA GGM PAMICUHFG Bedienungsanleitung
