Samsung LN40A650A1F Bedienungsanleitung
Network Connection - Wireless
You can connect to the Samsung’s Infolink network wirelessly through a wireless IP sharer.
HDMI IN4
H
DMI IN
4
TV Side Panel
Wireless LAN Adapter
for InfoLink
LAN Cable
Wireless IP sharer
The LAN Port on
the Wall
1. Connect the Samsung
Infolink Wireless adapter
into the Wiselink terminal
of the TV.
You must use the Samsung Wireless LAN Adapter for InfoLink(WIS-08BG) to use a wireless network.
The Samsung Wireless LAN Adapter for InfoLink is sold separately. Contact a Samsung Electronics agent or service
center for purchasing.
To use a wireless network, your TV must be connected to a wireless IP sharer.
If the wireless IP sharer supports DHCP, you TV can use a DHCP or static IP address to connect to the wireless
network.
You must use a wireless IP sharer that supports IEEE 802.11 B or IEEE 802.11G.
If the wireless IP sharer allows you to turn on/off the Ping connection function, turn it on.
Set the wireless IP sharer to Infrastructure mode. Ad-hoc mode is not supported.
Select a channel for the wireless IP sharer that is not currently being used. If the channel set for the wireless IP sharer
is currently being used by another device nearby, this will result in interference and communications may fail.
When applying the security key for the AP (wireless IP sharer), only the following is supported.
1) Authentication Mode : WEP, WPAPSK, WPA2PSK
2) Encryption Type : WEP, TKIP, AES
If you apply a security system other than the systems listed above, it will not work with the TV.
Network selection
Select Cable or Wireless as the method to connect to the Samsung’s Infolink
network.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
2. Press the ▲ or ▼ button to select “Network selection”, then press the
ENTER button.
3. Press the ▲ or ▼ button to select “Cable” or “Wireless”, then press the
ENTER button.
Cable: Connect to Samsung’s Infolink network using a cable.
Wireless: Connect to Samsung’s Infolink network wirelessly.
•
•
The menu is activated only if the Samsung Wireless LAN Adapter for
InfoLink is connected. (See page 107)
➣
➣
➣
➣
➣
➣
➣
➣
➣
•
•
➣
Setup
Language : English
Time
Networkselection :Cable ►
Cable Network Setup
Wireless Network Setup
V-Chip
Caption
External Settings
Entertainment : Off
Energy Saving : Off
Setup
Language : English
Time
Networkselection :Cable ►
Cable Network Setup
Wireless Network Setup
V-Chip
Caption
External Settings
Entertainment : Off
Energy Saving : Off
Cable
Wireless
Manual Setup
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
2. Press the ▲ or ▼ button to select “Wireless Network Setup”, then press the
ENTER button.
3. Press the ENTER button to select “Internet Protocol Setup”.
4. Press the ▲ or ▼ button to select “Manual Setup”, then press the ENTER
button.
5. Press the ▲, ▼, ◄ or ► button to move to an item, and press the numeric
button to congure the selected item. Press the ENTER button.
If you want to use a static IP address, refer to the user manual of your
wireless IP sharer.
Select “Access Point Select” to check the network connectivity. (Refer to
page 111)
Press the EXIT button to exit.
➣
➣
Setup
Network selection : Wireless
Cable Network Setup
WirelessNetworkSetup ►
V-Chip
Caption
External Settings
Entertainment : Off
Energy Saving : Off
PIP
SW Upgade
Wireless Network Setup
Internet Protocol Setup : Auto Setup
Network Test
Access Point Select : AP1
IP Address : 0000
Subnet Mask : 0000
Gateway : 0000
DNS Server : 0000
EnterMove Return
Auto Setup
Manual Setup
Cable Network Setup
Internet Protocol Setup : Manual Setup
Network Test
Access Point Select : AP1
IP Address : 0000
Subnet Mask : 0000
Gateway : 0000
DNS Server : 0000
EnterMove Return
Wireless Network Setup
The menu is activated only if the Samsung Infolink Wireless adapter is connected. (See page 107)
Auto Setup
If you connect the LAN cable and it supports DHCP, the Internet Protocol (IP)
Settings are automatically congured.
The wireless IP sharer to be connected to this product must support DHCP.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
2. Press the ▲ or ▼ button to select “Wireless Network Setup”, then press the
ENTER button.
3. Press the ENTER button to select “Internet Protocol Setup”.
4. Press the ▲ or ▼ button to select “Auto Setup”, then press the ENTER
button.
The Internet Protocol is set automatically.
Select “Access Point Select” to check the network connectivity.
(Refer to page 111)
Press the EXIT button to exit.
➣
➣
➣
➣
➣
Setup
Network selection : Wireless
Cable Network Setup
WirelessNetworkSetup ►
V-Chip
Caption
External Settings
Entertainment : Off
Energy Saving : Off
PIP
SW Upgade
Wireless Network Setup
Internet Protocol Setup : Auto Setup
Network Test
Access Point Select : AP1
IP Address : 0000
Subnet Mask : 0000
Gateway : 0000
DNS Server : 0000
EnterMove Return
Auto Setup
Manual Setup
Access Point Select
You can select the IP sharer to use when using a wireless network.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
2. Press the ▲ or ▼ button to select “Wireless Network Setup”, then press the
ENTER button.
3. Press the ▲ or ▼ button to select “Access Point Select”, then press the
ENTER button.
The wireless Access Points that exist in you area are searched and
displayed in the Access Point List.
4. Press the ▲ or ▼ button to select the Access Point to use. Then press the
ENTER button.
If a wireless Access Point is not in the Access Point list, press the Red
button.
When the connection is made, you will be returned to the screen
automatically.
If you selected an Access Point that requires security authentication,
enter the security key.
You can enter up to 26 characters for a security key.
If you have selected an Access Point with a security authentication:
- The Security Key input screen appears.
- Enter the security key and press the ENTER button.
- Using the Remote Control Buttons on the Security Key Input Screen
Button Operations
Wheel
(▲/▼/◄/►) Moves the selection up/down/left/right.
ENTER Enters (Inputs) the selected character.
RED Switch between Upper- and Lower-Case
Letters
GREEN You can delete an already entered
character.
BLUE Press this button to nish entering the
security key.
➣
➣
➣
➣
➣
➣
Setup
Network selection : Wireless
Cable Network Setup
WirelessNetworkSetup ►
V-Chip
Caption
External Settings
Entertainment : Off
Energy Saving : Off
PIP
SW Upgade
Wireless Network Setup
Internet Protocol Setup : Auto Setup
Network Test
Access Point Select : AP 1
IP Address : 0000
Subnet Mask : 0000
Gateway : 0000
DNS Server : 0000
EnterMove Return
Securty Key _
Number
Lowercase
Delete
Done
0~9
A B C D E F G
I J K L M NH
P Q R S T UO
W X Y ZV
Select ReturnMove
Wireless Network Setup
1~ 9Number
Wireless Network Setup
Access Point Select 1/5
Select Return
Search
AP 1
AP 2 WEP
AP 3
AP 4
Move
Wireless Network Setup
Access Point Select 1/5
Select Return
Search
0016018F0176
ALKO_AP WEP
NESPOT
AP4
Move
Connected
OK
Network Test
You can test or conrm the network connection status after setting up the network.
1. Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the ENTER button.
2. Press the ▲ or ▼ button to select “Wireless Network Setup”, then press the
ENTER button.
3. Press the ▲ or ▼ button to select “Network Test”, then press the ENTER
button.
The current network settings will appear.
If no “Access Point Select” is set up, the test cannot be completed. (See
page 111)
Press the EXIT button to exit.
When unable to connect to a wireless network
1. Your TV may fail to locate an AP that is congured as a private SSID type.
In this case, please change the AP settings and try again.
2. If your Internet service provider has registered the MAC address of the
device used to connect to the Internet for the rst time and authenticates
the MAC address each time you connect to the Internet, your TV may not
be able to connect to the Internet as the MAC address differs from that of
the device (PC) used to connect to the Internet the rst time. In this case,
ask your Internet service provider about the procedures to connect devices
other than your PC (such as your TV) to the Internet.
If you cannot connect to the Internet even if you have followed the procedures
of your Internet service provider, please contact a Samsung Electronics
Service Center.
➣
➣
Network Test
MAC Address
IP Address, Subnet, Gateway, DNS Server
Gateway Ping
Domain Ping
Network Test Completed.
Return
Setup
Network selection : Wireless
Cable Network Setup
WirelessNetworkSetup ►
V-Chip
Caption
External Settings
Entertainment : Off
Energy Saving : Off
PIP
SW Upgade
Wireless Network Setup
Internet Protocol Setup : Auto Setup
Network Test
Access Point Select : AP1
IP Address : 0000
Subnet Mask : 0000
Gateway : 0000
DNS Server : 0000
EnterMove Return
Andere Handbücher für LN40A650A1F
1
Inhaltsverzeichnis
Andere Samsung Flachbildfernseher Handbücher
Samsung
Samsung PN42A400C2D Bedienungsanleitung
Samsung
Samsung CL-21M21MQ Benutzerhandbuch
Samsung
Samsung PN50B560T5FXZA Bedienungsanleitung
Samsung
Samsung LW17M24C Bedienungsanleitung
Samsung
Samsung UN22D5003BF Bedienungsanleitung
Samsung
Samsung UN75F8000XZA Leitfaden
Samsung
Samsung PN50A460S4D Bedienungsanleitung
Samsung
Samsung UN55ES7100FXZA Montageanleitung
Samsung
Samsung PN50B530 - 50" Plasma TV Bedienungsanleitung
Samsung
Samsung LW22A13W Kurzanleitung
Samsung
Samsung LN46B750U1FXZA Bedienungsanleitung
Samsung
Samsung LN32A540P2D Montage- und Bedienungsanleitung
Samsung
Samsung PN50C540 Bedienungsanleitung
Samsung
Samsung LE22A455 Bedienungsanleitung
Samsung
Samsung LW32A33W Kurzanleitung
Samsung
Samsung PS-42D4SK Kurzanleitung
Samsung
Samsung LN32B640 Bedienungsanleitung
Samsung
Samsung UN85S9AF Leitfaden
Samsung
Samsung UN46C6800UFXZA Bedienungsanleitung
Samsung
Samsung UN55ES6900F Leitfaden
Beliebte Flachbildfernseher Handbücher anderer Marken
Philips
Philips 32PFL7602D - annexe 1 Bedienungsanleitung
Philips
Philips 42PF7321 Bedienungsanleitung
Sony
Sony WEGA KE-50XBR900, KE-42XBR900 Bedienungsanleitung
JVC
JVC LT-26DX7BFN Bedienungsanleitung
Philips
Philips Match Line 29PT9006/12 Bedienungsanleitung
Philips
Philips 37PFL5522D - annexe 2 Bedienungsanleitung
Westinghouse
Westinghouse TX-42F970Z Bedienungsanleitung
Philips
Philips 32PFL5332S Bedienungsanleitung
Philips
Philips 40PFL5705D Bedienungsanleitung
Toshiba
Toshiba 32BV500B Bedienungsanleitung
Philips
Philips MathLine 32PW9765 Bedienungsanleitung
Philips
Philips MatchLine FlatTV 50PF9965 Bedienungsanleitung
