Samsung PN50A650TF Bedienungsanleitung

English - 1

Rear & Side Panel Jacks

PN50A650T1F/ PN58A650T1F

1-800-SAMSUNG (7267864)

Samsung Electronics America, Inc.

105 Challenger Road Ridgefield Park, NJ 07660-0511

Samsung Electronics Canada Inc., Customer Service

55 Standish Court Mississauga, Ontario L5R 4B2

Call center hours of operation (Mon-Sun 9AM-12AM EST).

www.samsung.com/global/register.

POWER IN

LAN

AUDIO OUT (R/L)

PC IN[PC]/[AUDIO]

DVI IN (HDMI 2) (AUDIO-R/L)

HDMI IN 1, 2, 3

ANT IN

DIGITAL AUDIO OUT (OPTICAL)

COMPONENT IN 1, 2 / AV IN 1

EX-LINK

HDMI IN 4

WISELINK

S-VIDEO (AV IN 2)

AV IN 2

HEADPHONE

($-)).

BN68-01363J-00Eng_0327.indd 1 2008-03-27 오후 7:49:50

English - 2

Video Input Performance Comparison

You can use the remote control up to a distance of about 23 feet from the TV.

Remote Control Buttons

/ HDMI/DVI Best

/ PC/COMPONENT Better

S-VIDEO Good

VIDEO Normal

Audio Output Performance Comparison

OPTICAL (Digital) Best

AUDIO (Analog) Normal

POWER

Turns the TV on and off.

Selects the TV mode directly.

NUMERIC BUTTONS

Press to change the channel.

Press to select additional channels

(digital and analog) being broadcast

by the same station. For example,

to select channel “54-3”, press “54”,

then press “ ” and “3”.

MUTE

Press to temporarily cut off the

sound.

VOL

Press to increase or decrease the

volume.

SOURCE

Press to display and select the

available video sources.

CH LIST

Used to display Channel Lists on the

screen.

TOOLS

Use to quickly select frequently used

functions.

UP▲ / DOWN▼ / LEFT◄ /

RIGHT► / ENTER

Press the Up/Down/Left/Right

sections of the wheel button and

Enter to select on-screen menu

items and change menu values.

You can navigate up and down the

menu, switch channels and adjust

the volume by turning the wheel

button. (See pages 18~19 of the

owner's manual)

INFO

Press to display information on the

TV screen.

COLOR BUTTONS

Use these buttons in the Channel list

and WISELINK, etc.

Controls the caption decoder.

E.MODE

Press to select the preset display

and sound modes for sports, cinema

and games.

Use these buttons in the DMA,

WISELINK and Anynet+ modes.

( : This remote can be used

to control recording on Samsung

recorders with the Anynet+ feature)

ON/OFF

Press to backlight the buttons on the

remote.

This function is convenient for using

at night or when the room is dark.

(Using the remote control with the

ON/OFF( ) light button set to On

will reduce the battery usage time.)

PRE-CH

Tunes to the previous channel.

Press to change channels.

(

Displays the main on-screen menu.

)

W.LINK(WISELINK)

This function enables you to view

and play photo and music files from

an external device. (Refer to pages

71 (Photo) and 81 (Music) of the

owner's manual)

RETURN

Returns to the previous menu.

EXIT

Press to exit the menu.

INFO.L

Press to use the News, Stock

Market and Weather Forecast

information services available over

the network.

(see page 95 of the owner's manual)

DMA (Digital Media Adapter)

Use this when connecting a

Samsung DMA device through an

HDMI interface and switching to

DMA mode.

For more information on the

operating procedures, refer to the

user manual of the DMA.

➢This button is available when “

Anynet+(HDMI-CEC)” is “On.

(see page 99 of the owner's

manual)

P.SIZE

Picture size selection.

FAV.CH

Press to switch to your favorite

channels.

BN68-01363J-00Eng_0327.indd 2 2008-04-08 오전 12:17:25

English - 3

Connecting to DVI (Digital Visual Interface)



Connect a HDMI/DVI Cable or DVI-

HDMI Adapter between the HDMI

IN 2 jack on the TV and the DVI jack

on the DVD Player or Cable Box/

Satellite receiver (Set-Top Box).



Connect Audio Cables between the

DVI IN (HDMI 2)

[R-AUDIO-L] jack on the TV and the

DVD Player or Cable Box / Satellite

receiver (Set-Top Box).



Press the SOURCE button on the

remote control until you see the Set-

Top Box signal (see “To Select the

Source” on page 10).

Connecting to HDMI (High Definition Multimedia Interface)



Connect an HDMI Cable between

the HDMI IN (1, 2, 3 or 4) jack on

the TV and the HDMI jack on the

DVD Player or Cable Box / Satellite

receiver (Set-Top Box).



Press the SOURCE button on the

remote control until you see the Set-

Top Box signal (see “To Select the

Source” on page 10).

➢

Each DVD Player or Cable Box / Satellite receiver (Set-Top Box) has a different back panel configuration.

➢ 

When connecting a DVD Player or Cable Box / Satellite receiver (Set-Top Box), match the color of the connection terminal to the

cable.

➢

When using an HDMI / DVI cable connection, you must use the HDMI IN 2 jack.

What is HDMI?

•HDMI, or high-definition multimedia interface, is an interface that enables the transmission of digital audio and video

signals using a single cable.

•The difference between HDMI and DVI is that the HDMI device is smaller in size and

as the HDCP (High Bandwidth

Digital Copy Protection) coding feature installed.

➢

Each DVD Player or Cable Box / Satellite receiver (Set-Top Box) has a different back panel configuration.

➢

The TV may not output sound and pictures may be displayed with abnormal color when DVD Player or Cable Box / Satellite

receivers supporting HDMI versions older than 1.3 are connected. When connecting an older HDMI cable and there is no sound,

connect the HDMI cable to the HDMI IN 2 jack and the audio cables to the DVI IN (HDMI2) [R-AUDIO-L] jacks on the back of

the TV. If this happens, contact the company that provided the DVD Player or Cable Box / Satellite receiver to confirm the HDMI

version, then request an upgrade.

➢

HDMI cables that are not 1.3 may cause annoying flicker or no screen display.

Connecting a DVD Player or Cable Box /

Satellite receiver (Set-Top Box) via HDMI

Connecting a DVD Player or Cable Box /

Satellite receiver (Set-Top Box) via DVI

TV Rear Panel TV Side Panel

HDMI Cable (Not supplied)

DVD Player or Cable Box /

Satellite receiver (Set-Top Box)

Audio Cable (Not supplied)

HDMI/DVI Cable (Not supplied)

DVD Player or Cable Box /

Satellite receiver (Set-Top Box)

TV Rear Panel

BN68-01363J-00Eng_0327.indd 3 2008-03-27 오후 7:49:58

English - 4

Connecting to Y, PB, PR



Connect a Component Cable

between the COMPONENT IN (1 or

2) [Y, PB, PR] jacks on the TV and

the COMPONENT [Y, PB, PR] jacks

on the DVD Player or Cable Box /

Satellite receiver(Set-Top Box).



Connect Audio Cables between

the COMPONENT IN (1 or 2) [R-

AUDIO-L] jacks on the TV and the

AUDIO OUT jacks on the DVD

Player or Cable Box / Satellite

receiver (Set-Top Box).



Press the SOURCE button on the

remote control until you see the Set-

Top Box signal. (see “To Select the

Source” on page 10).

➢ 

Component video separates the video into Y (Luminance (brightness), PB(Blue) and PR(Red) for enhanced video quality. Be sure

to match the component video and audio connections. For example, if connecting a Component video cable to COMPONENT IN 1,

connect the audio cable to COMPONENT IN 1 also.

➢

Each DVD Player or Cable Box / Satellite receiver (Set-Top Box) has a different back panel configuration.

➢ 

When connecting a DVD Player or Cable Box / Satellite receiver (Set-Top Box), match the color of the connection terminal to the

cable.



Connect a Video Cable

(or S-Video Cable) between the AV

IN 2 [VIDEO] (or S-VIDEO) jack on

the TV and the VIDEO OUT jack on

the Camcorder.



Connect Audio Cables between the

AV IN 2 [L-AUDIO-R] jacks on the

TV and the AUDIO OUT jacks on

the Camcorder.



Press the SOURCE button on the

remote control until you see the

Camcorder signal (see “To Select

the Source” on page 10).

➢

Each Camcorder has a different back

panel configuration.

➢

When connecting a Camcorder, match

the color of the connection terminal to

the cable.

Connecting a Camcorder

Connecting a DVD Player or Cable Box /

Satellite receiver (Set-Top Box) via Component cables

DVD Player or Cable Box/

Satellite receiver (Set-Top Box)

Audio Cable (Not supplied)

Component Cable (Not supplied)

TV Rear Panel

Camcorder

TV Side Panel

S-Video Cable(Not supplied)

Video Cable (Not supplied)

Audio Cable (Not supplied)

BN68-01363J-00Eng_0327.indd 4 2008-03-27 오후 7:50:01

English - 5

Connecting a VCR

To begin, follow steps 1–3 in the

previous section to connect the

antenna or cable to your VCR and

your TV.

Connect an S-Video cable between

the [S-VIDEO] jack on the TV and

the S-VIDEO OUT jack on the VCR.

Connect Audio Cables between the

AUDIO OUT jacks on the VCR and

the AV IN 2 [R-AUDIO-L] jacks on

the TV.

Press the SOURCE button on the

remote control until you see the

VCR signal (see “To Select the

Source” on page 10).

S-Video Connection

VCR Rear Panel

TV Side Panel

S-Video Cable (Not supplied)

Audio Cable (Not supplied)

TV Rear Panel

Antenna Cable (Not supplied)

Unplug the cable or antenna from

the back of the TV.

Connect the cable or antenna to the

ANT IN terminal on the back of the

VCR.

Connect an Antenna Cable between

the ANT OUT terminal on the VCR

and the ANT IN terminal on the TV.

Connect a Video Cable between the

VIDEO OUT jack on the VCR and

the AV IN 1 [Y/VIDEO] or AV IN 2

[VIDEO] jack on the TV.

Connect Audio Cables between the

AUDIO OUT jacks on the VCR and

the AV IN 1 (or AV IN 2)

[R-AUDIO-L] jacks on the TV.

Press the SOURCE button on the

remote control until you see the

VCR signal (see “To Select the

Source” on page 10).

Video Connection

➢

If you have a “mono” (non-stereo) VCR, use a Y-connector (not supplied) to connect to the right and left audio input jacks of the

TV. Alternatively, connect the cable to the “R” jack. If your VCR is stereo, you must connect two cables.

➢

Each VCR has a different back panel configuration.

➢

When connecting a VCR, match the color of the connection terminal to the cable.

➢

When connecting to AV IN 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable (Yellow).

An S-Video cable may be included with your VCR. (If not, check your local electronics store.)

➢

Each VCR has a different back panel configuration.

➢

When connecting a VCR, match the color of the connection terminal to the cable.

VCR Rear Panel

TV Side Panel

S-Video Cable (Not supplied)

Audio Cable (Not supplied)

TV Rear Panel

Antenna Cable (Not supplied)

BN68-01363J-00Eng_0327.indd 5 2008-03-27 오후 7:50:06

English - 6



Connect an Optical Cable

between the DIGITAL AUDIO OUT

(OPTICAL) jack on the TV and the

Digital Audio Input (OPTICAL) jacks

on the Digital Audio System.

When a Digital Audio System is

connected to the “DIGITAL AUDIO

OUT (OPTICAL)” jack: Decrease

the volume of the TV, and adjust

the volume level with the system’s

volume control.

What is OPTICAL?

• An optical cable converts an

electric signal into an optical

light signal, and transmits it

through glass fibers. S/PDIF is

a transmission system of digital

audio in the form of a light wave

that uses a glass conductor.

Connecting a Digital Audio System

➢5.1CH audio is possible when the TV is connected to an external device supporting 5.1CH.

➢Each Digital Audio System has a different back panel configuration.

➢When the receiver (home theater) is set to On, you can hear sound output from the TV’s Optical jack. When the TV is displaying a

DTV(air) signal, the TV will send out 5.1 channel sound to the Home theater receiver. When the source is a digital component such

as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the Home Theater receiver.

If you want to hear 5.1 channel audio, connect the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD player or Cable/Satellite Box

directly to an Amplifier or Home Theater, not the TV.



Connect Audio Cables between the

AUDIO OUT [R-AUDIO-L] jacks on

the TV and AUDIO IN [L-AUDIO-R]

jacks on the Amplifier/DVD Home

Theater.

When an audio amplifier is

connected to the “AUDIO OUT

[R-AUDIO-L]” jacks terminals:

Decrease the volume of the TV,

and adjust the volume level with the

Amplifier’s volume control.

➢

Each Amplifier / DVD Home

Theater has a different back panel

configuration.

➢

When connecting an Amplifier / DVD

Home Theater, match the color of the

connection terminal to the cable.

Connecting an Analog Amplifier / DVD Home Theater

TV Rear Panel

Amplifier/

DVD Home Theater

Audio Cable (Not supplied)

TV Rear Panel

Digital Audio System

Optical Cable (Not supplied)

BN68-01363J-00Eng_0327.indd 6 2008-03-27 오후 7:50:11

English - 7

Using the D-Sub Cable



Connect a D-Sub Cable between

PC IN [PC] jack on the TV and the

PC output jack on your computer.



Connect a PC Audio Cable between

the PC IN [AUDIO] jack on the TV

and the Audio Out jack of the sound

card on your computer.

Using the HDMI/DVI Cable



Connect a HDMI/DVI cable between

the HDMI IN 2 jack on the TV

and the PC output jack on your

computer.



Connect a 3.5 mm Stereo plug to

2RCA cable between the DVI IN

(HDMI2) [R-AUDIO-L] jack on the

TV and the Audio Out jack of the

sound card on your computer.

Connecting a PC

➢

Each PC has a different back panel configuration.

➢

When connecting a PC, match the color of the connection terminal to the cable.

➢

When using an HDMI/DVI cable connection, you must use the HDMI IN 2 terminal.

TV Rear Panel

D-Sub Cable (Not supplied)

PC Audio Cable (Not supplied)

Using the D-Sub Cable

Using the HDMI/DVI Cable

TV Rear Panel

3.5 mm Stereo plug to RCA Cable (Not supplied)

HDMI/DVI Cable (Not supplied)

BN68-01363J-00Eng_0327.indd 7 2008-03-27 오후 7:50:16

English - 8

Press the POWER button on the remote control.

You can also use the POWER button on the TV.

➢It may take a while for the picture to appear.

Turning the TV On and Off

Viewing the Displays and Menus

Viewing the Display



Press the INFO button on the remote control.

The TV will display the channel, the type of sound,

and the status of certain picture and sound settings.

Viewing the Menus

Your TV can memorize and store all of the available channels

for both air and cable channels. After the available channels

are memorized, use the CH

RETURN

TOOLS

INFO

W.LINK

CH LIST

EXIT

or CH

RETURN

TOOLS

INFO

W.LINK

CH LIST

EXIT

button to scan

through the channels. This eliminates the need to change

channels by entering the channel digits. There are three

steps for memorizing channels: selecting a broadcast source,

memorizing the channels (automatic) and adding and deleting

channels (Channel Lists).

Memorizing the Channels

Storing Channels in Memory

(Automatic Method)

Before your television can begin memorizing the available

channels, you must specify the type of signal source that is

connected to the TV (i.e. an Air or a Cable system).



Press the MENU button to display the menu.

Press the ▲ or ▼ button to select Channel, then

press the ENTER button.



Press the ▲ or ▼ button to select Auto Program,

then press the ENTER button.



Press the ▲ or ▼ button to select an antenna

connection, then press the ENTER button.

➢

Air: Air antenna signal.

Cable: Cable antenna signal.

Auto: Air and Cable antenna signals.

TV #1 Wed, Jan 2 12:28am

M. Spillane’s Mike Hammer

Bonocrunch

DTV Air

13-1

Dolby Digital

480i 4:3 English

11:36 pm - 12:42 am



With the power on, press the MENU button.

The main menu appears on the screen. The menu’s

left side has icons: Picture, Sound, Channel,

Setup, Input, Application.



Press the ▲ or ▼ button to select one of the icons.

Then press the ENTER button to access the icon’s

sub-menu.

➢

To move to a lower menu, turn the wheel

clockwise when the menu Display is on the

screen. To move to a higher menu, turn the

wheel counterclockwise.



Press the EXIT button to exit.

➢

It takes about one minute until the on-screen

menu disappears.

Mode :Standard

Cell Light : 7

Contrast : 80

Brightness : 45

Sharpness : 50

Color : 50

Tint (G/R) : G50/R50

Detailed Settings

Picture

Channel

Antenna : Air

Auto Program

►

Clear Scrambled Channel

Channel List

Fine Tune

Signal Strength

Auto Program

Select the Antenna source to memorize.

Air

Cable

Auto

ReturnEnterMove

Start

Auto Program

Select the cable system.

Analog

Digital

HRC IRC

HRC IRCSTD

Start

ReturnEnterMove

STD

BN68-01363J-00Eng_0327.indd 8 2008-03-27 오후 7:50:18

English - 9



When selecting the Cable TV system:

Press the ENTER button to start the auto program.

Press the ◄ or ► to select the correct analog signal

cable system source among STD, HRC, and IRC,

then press the ENTER button. If you have Digital

cable TV, select the cable system signal source for

both Analog and Digital.

➢

STD, HRC, and IRC identify various types of

cable TV systems. Contact your local cable

company to identify the type of cable system

that exists in your particular area. At this point

the signal source has been selected.



The TV begins memorizing all available stations.

➢

After all the available channels are stored, it

starts to remove scrambled channels. The Auto

program menu then reappears.

➢

If you want to stop Auto Programming, press

the ENTER button. The Stop Auto Program?

message will be displayed. Select Yes by

pressing the ◄ or ► button, then press the

ENTER button.

Press the EXIT button to exit.

You can select the type of picture which best corresponds to

your viewing requirements.



Press the MENU button to display the menu.

Press the ENTER button to select Picture.



Press the ENTER button to select Mode.

Press the ▲ or ▼ button to select Dynamic,

Standard, or Movie.

Press the ENTER button.

●

Dynamic: Select the picture for high-definition in

a bright room.

●

Standard: Select the picture for the optimum

display in the normal environment.

●

Movie: Select the picture for viewing movies in a

dark room.



Press the EXIT button to exit.

Changing the Picture Standard

Auto Program

Auto Program in Progress.

Stop

Cable 3

DTV Air : 5 Air : 4

DTV Cable : -- Cable : --

Enter Return

Auto Program

Auto Program is completed.

56 channels are memorized.

DTV Air : 20 Air : 11

DTV Cable : 15 Cable : 10

ReturnEnter

Mode

Standard ►

Cell Light : 7

Contrast : 80

Brightness : 45

Sharpness : 50

Color : 50

Tint (G/R) : G50/R50

Detailed Settings

Picture Picture

Mode

Cell Light : 7

Contrast : 80

Brightness : 45

Sharpness : 50

Color : 50

Tint (G/R) : G50/R50

Detailed Settings

Dynamic

Standard

Movie

BN68-01363J-00Eng_0327.indd 9 2008-03-27 오후 7:50:18

English - 10

Use to select TV or other external input sources such as

DVD players or Cable Box/Satellite receivers (Set-Top Box)

connected to the TV. Use to select the input source of your

choice.

To Select the Source



Press the MENU button to display the menu.

Press the ▲ or ▼ button to select Input, then press

the ENTER button.



Press the ENTER button to select Source List.

Press the ▲ or ▼ button to select the signal source,

then press the ENTER button.

➢

Available signal sources: TV, AV1, AV2,

S-Video, Component1, Component2, PC,

HDMI1, HDMI2/DVI, HDMI3, HDMI4, USB.

➢

You can choose only those external devices

that are connected to the TV. In the Source

List, connected inputs will be highlighted and

sorted to the top.

Inputs that are not connected will be sorted to

the bottom.

Source List

Edit Name

Input

AV1

----

AV2

----

S-Video

----

Component1

----

Component2

----

Refresh Option

TOOLS

BN68-01363J-00Eng_0327.indd 10 2008-03-27 오후 7:50:18

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Samsung Flachbildfernseher Handbücher

Samsung

Samsung LT-P2045U Einrichtungshandbuch

Samsung

Samsung UN37C5000QF Bedienungsanleitung

Samsung

Samsung LN22B460 Bedienungsanleitung

Samsung

Samsung UN26EH4000FXZA Montageanleitung

Samsung

Samsung UN19D4003BD Bedienungsanleitung

Samsung

Samsung ME75B Bedienungsanleitung

Samsung

Samsung UN46F6800AF Bedienungsanleitung

Samsung

Samsung BN68-02625B-03 Bedienungsanleitung

Samsung

Samsung HP-R4272 Bedienungsanleitung

Samsung

Samsung SyncMaster 275TPLUS Bedienungsanleitung

Samsung

Samsung BN68-02618A-00 Bedienungsanleitung

Samsung

Samsung LN46D503F6F Bedienungsanleitung

Samsung

Samsung 5070 Series Bedienungsanleitung

Samsung

Samsung UN55F9000AF Leitfaden

Samsung

Samsung BN68-02714F-02 Installations- und Betriebshandbuch

Samsung

Samsung LN40C650L1F Bedienungsanleitung

Samsung

Samsung UN55ES8000G Leitfaden

Samsung

Samsung UN60F8000BFXZA Leitfaden

Samsung

Samsung S19C300B Bedienungsanleitung

Samsung

Samsung LN40C630K1FXZA Bedienungsanleitung

Samsung

Samsung UN46B8000XF Bedienungsanleitung

Samsung

Samsung PN42C430A1D Bedienungsanleitung

Samsung

Samsung SyncMaster 460P Bedienungsanleitung

Samsung

Samsung UN75F6400AF Bedienungsanleitung

Beliebte Flachbildfernseher Handbücher anderer Marken

Philips

Philips 32PFL7602D - annexe 1 Bedienungsanleitung

Philips

Philips 42PF7321 Bedienungsanleitung

Sony

Sony WEGA KE-50XBR900, KE-42XBR900 Bedienungsanleitung

JVC

JVC LT-26DX7BFN Bedienungsanleitung

Philips

Philips Match Line 29PT9006/12 Bedienungsanleitung

Philips

Philips 37PFL5522D - annexe 2 Bedienungsanleitung

Westinghouse

Westinghouse TX-42F970Z Bedienungsanleitung

Philips

Philips 32PFL5332S Bedienungsanleitung

Philips

Philips 40PFL5705D Bedienungsanleitung

Toshiba

Toshiba 32BV500B Bedienungsanleitung

Philips

Philips MathLine 32PW9765 Bedienungsanleitung

Philips

Philips MatchLine FlatTV 50PF9965 Bedienungsanleitung

RCA

RCA MR53R400 Bedienungsanleitung

Philips

Philips 28PW8818/12 Bedienungsanleitung

JVC

JVC GGT0362-001A-H Bedienungsanleitung

Philips

Philips Magnavox 37MF331D/37 Bedienungsanleitung

Sanyo

Sanyo FVM4212 Bedienungsanleitung

Philips

Philips 47PFL7623D Bedienungsanleitung