Samsung Bixolon SRP-270 Bedienungsanleitung

User's Manual

SRP-270

Impact Printer

Rev. 1.00

http://www.samsungminiprinters.com

Rev. 1.00 - 2 -

SRP-270

■Safety Precautions

In using the present appliance, please keep the following safety regulations in order to

prevent any hazard or material damage.

WARNING

Violating following instructions can cause serious injury or death.

Do not plug several products in one multi-outlet.

• This can provoke over-heating and a fire.

• If the plug is wet or dirty, dry or wipe it before usage.

• If the plug does not fit perfectly with the outlet, do not plug in.

•Be sure to use only standardized multi-outlets.

PROHIBITED

You must use only the supplied adapter.

•It is dangerous to use other adapters.

PROHIBITED

ONLY SUPPLIED ADAPTER

Do not pull the cable to unplug.

•This can damage the cable, which is the origin of a fire or a

breakdown of the printer.

PROHIBITED

Keep the plastic bag out of children’s reach.

•If not, a child may put the bag on his head.

PROHIBITED

Do not plug in or unplug with your hands wet.

•You can be electrocuted.

PROHIBITED

Do not bend the cable by force or leave it under any

heavy object.

• A damaged cable can cause a fire.

PROHIBITED

Rev. 1.00 - 3 -

SRP-270

CAUTION

Violating following instructions can cause slight wound or damage the appliance.

If you observe a strange smoke, odor or noise from

the printer, unplug it before taking following

measures.

• Switch off the printer and unplug the set from the mains.

•After the disappearance of the smoke, call your dealer to

repair it.

PRINTER

TO UNPLUG

Keep the desiccant out of children’s reach.

•If not, they may eat it.

PROHIBITED

Install the printer on the stable surface.

•If the printer falls down, it can be broken and you can hurt

yourself.

PRINTER

PROHIBITED

Use only approved accessories and do not try to

disassemble, repair or remodel it for yourself.

•Call your dealer when you need these services.

• Do not touch the blade of auto cutter.

PRINTER

DISASSEMBLING

PROHIBITED

Do not let water or other foreign objects in the

printer.

•If this happened, switch off and unplug the printer before

calling your dealer.

PRINTER

PROHIBITED

Do not use the printer when it is out of order. This

can cause a fire or an electrocution.

•Switch off and unplug the printer before calling your dealer.

PRINTER

DEALER

TO UNPLUG

Rev. 1.00 - 4 -

SRP-270

■Warning - U.S.A

This equipment has been tested and found to comply with the limits for a Class A digital

device pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference when the equipment is operated in a

commercial environment. This equipment generates uses, and can radiate radio frequency

energy and if not installed and used according to the instruction manual, may cause

harmful interference to radio communications. Operation of this equipment in a residential

area is likely to cause harmful interference in which case the user will be required to

correct the interference at his own expense.

■Notice - Canada

This Apparatus complies with class “A” limits for radio interference as specified in the

Canadian department of communications radio interference regulations.

Get appareil est conforme aux normes class “A” d’interference radio tel que specifier par

ministre canadien des communications dans les reglements d’interference radio.

■Caution

Some semiconductor devices are easily damaged by static electricity. You should turn the

printer “OFF”, before you connect or disconnect cables. This will help protect the printer

against static electricity. If the printer is damaged by the static electricity, you should turn

the printer OFF, and refer to your local service provider.

■Waste Electrical and Electric Equipment (WEEE)

This marking shown on the product or its literature, indicates that is should not

be disposed with other household wastes at the end of its working life, To

prevent possible harm to the environment or human health from uncontrolled

waste disposal, please separate this from other types of wastes and recycle it

responsibly to promote the sustainable reuse of material resources. Household

users should contact either the retailer where they purchased this product, or

their local government office, for details of where and how they can take this item for

environmentally safe recycling. Business users should contact their supplier and check the

terms and conditions of the purchase contract. This product should not be mixed with other

commercial wastes for disposal.

■Label Material

* Control Label: PC

* Other Labels: PET

Rev. 1.00 - 5 -

SRP-270

■Introduction

The SRP-270 Roll Printers are designed for use with electronic instruments such as

system ECR, POS, banking equipment, computer peripheral equipment, etc.

The main features of the printer are as follows:

1. High speed printing : 4.6 lines per seconds.

2. 2 color dot-matrix printer.

3. RS-232C(SRP-270), RS-485 serial interface (SRP-270S),

Parallel interface (SRP-270P),USB interface(SRP-270U).

4. The data buffer allows the unit to receive print data even during printing.

5. Peripheral units drive circuit enables control of external devices such as cash drawer.

Please be sure to read the instruction in this manual carefully before using your new

SRP-270 series.

NOTE※

The power-outlet should be near the equipment and it should be easy accessible.

※All specifications are subjected to change without notice.

Rev. 1.00 - 6 -

SRP-270

■Table of Contents

1. Setting Up the Printer ................................................................................................... 7

1-1 Unpacking.................................................................................................................. 7

1-2 Installing the Printer ................................................................................................... 7

1-3 Functions ................................................................................................................... 8

2. Connecting the cables.................................................................................................. 9

2-1 Connecting the AC adapter to the printer .................................................................. 9

2-2 Connecting Interface Cable and Drawer Cable to the printer .................................. 10

2-2-1 Serial Interface (RS-232C) ...........................................................................11

2-2-2 Serial Interface (RS-485) ............................................................................. 12

2-2-3 Parallel Interface (IEEE1284) ...................................................................... 13

2-2-4 USB Interface .............................................................................................. 14

2-2-5 Drawer Connector ....................................................................................... 14

3. Setting the Dip Switches ............................................................................................ 15

3-1 Serial Interface ........................................................................................................ 16

3-2 Parallel / USB Interface ........................................................................................... 17

4. Ribbon Cassette Installation...................................................................................... 18

5. Roll Paper Installation ................................................................................................ 19

6. Removing Jammed Paper .......................................................................................... 23

7. Self Test....................................................................................................................... 26

8. Hexadecimal Dumping ............................................................................................... 27

9. Specification ............................................................................................................... 28

Rev. 1.00 - 7 -

SRP-270

1. Setting Up the Printer

1-1 Unpacking

After unpacking the unit, check that all the necessary accessories are included in the

package.

Manual

1-2 Installing the Printer

1-2-1 Avoid locations in direct sunlight or subject to excessive heat.

1-2-2 Avoid using or storing the printer in places subject to excessive moisture.

1-2-3 Do not use or store the printer in a dusty or dirty area. Avoid places subject to

intense vibration or shock.

1-2-4 Choose a stable and flat place for proper use of the printer.

1-2-5 Make sure that there is enough space around the printer so that it can be used easily.

Rev. 1.00 - 8 -

SRP-270

1-3 Functions

O The power switch is used to turn the printer on and off.

O The FEED button is used to feed roll paper.

O The POWER light (green) is on when the printer is turned on and is off when the printer

is turned off.

O The ERROR light (red) is on when the printer is in error state.

O The Paper Out light(red) is on when the printer is in paper end.

Rev. 1.00 - 9 -

SRP-270

2. Connecting the cables

2-1 Connecting the AC adapter to the printer

2-1-1 Make sure that the printer is turned off.

2-1-2 CHECK the label on the AC adapter to make sure the voltage required by the

AC adapter matches that of your electrical outlet.

2-1-3 Plug the DC cord connector into the printer’s power connector.

2-1-4 Plug the AC adapter power cord into the wall outlet.

Rev. 1.00 - 10 -

SRP-270

2-2 Connecting Interface Cable and Drawer Cable to the printer

Connect the Host Computer(POS/ECR) to the printer using an interface cable that

matches the specifications of the printer and the Host computer(POS/ECR). Be sure to

use a drawer that matches the printer's specification.

- Turn off both the printer and the Host computer(POS/ECR).

- Plug the serial interface cable connector into the printer’s interface connector,

then tighten the screws on both sides of the connector. In case of the parallel

interface, squeeze the wire clips on the printer together until they lock in place on

both sides of the connector.

- Plug the drawer cable into the drawer kick-out connector on the back of the

printer next to the interface connector. Do not connect a telephone line to the

drawer kick-out connector; otherwise the printer and the telephone line may be

damaged.

- Turn on the Printer and Host computer(POS/ECR).

Andere Handbücher für Bixolon SRP-270

Inhaltsverzeichnis

Andere Samsung Drucker Handbücher

Samsung

Samsung SRP-350 Bixolon Bedienungsanleitung

Samsung

Samsung ML-4550 Series Bedienungsanleitung

Samsung

Samsung ML ML-2510 Bedienungsanleitung

Samsung

Samsung ML-2010 - B/W Laser Printer Bedienungsanleitung

Samsung

Samsung ML-1200 Series Bedienungsanleitung

Samsung

Samsung ML 3050 - B/W Laser Printer Benutzerhandbuch

Samsung

Samsung ML-2010 Series Bedienungsanleitung

Samsung

Samsung ML 2510 - B/W Laser Printer Bedienungsanleitung

Samsung

Samsung ML 7000 Bedienungsanleitung

Samsung

Samsung ML-1200 Series Bedienungsanleitung

Samsung

Samsung Lazett Combo SCX-4216F Bedienungsanleitung

Samsung

Samsung CLX-3160 Series Bedienungsanleitung

Samsung

Samsung CLP-36x Series Bedienungsanleitung

Samsung

Samsung ML-7300N Benutzerhandbuch

Samsung

Samsung ML-1665 Bedienungsanleitung

Samsung

Samsung CLX-4195FN Bedienungsanleitung

Samsung

Samsung 2 COLOR THERMAL PRINTER SRP-275 Bedienungsanleitung

Samsung

Samsung ML-1430 Bedienungsanleitung

Samsung

Samsung CLP 610ND - Color Laser Printer Bedienungsanleitung

Samsung

Samsung ML-2950ND Bedienungsanleitung

Samsung

Samsung CLP-620ND Bedienungsanleitung

Samsung

Samsung Xpress M2020W Bedienungsanleitung

Samsung

Samsung SF4500 Bedienungsanleitung

Samsung

Samsung ML-2571N Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Brother

Brother 1440 - HL B/W Laser Printer Kurzanleitung

Fuji Xerox

Fuji Xerox DocuPrint P375 dw Bedienungsanleitung

WOOSIM

WOOSIM PORTI-S30 Bedienungsanleitung

Olivetti

Olivetti PG L2140 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 224e Bedienungsanleitung

Canon

Canon LBP113w Bedienungsanleitung

Xerox

Xerox DocuColor 5000 Bedienungsanleitung

Canon

Canon PRO-500 Series Einrichtungshandbuch

Epson

Epson ET-7750 Betriebsanleitung

Lexmark

Lexmark Infoprint 1332 Bedienungsanleitung