Samsung STP-103S Bedienungsanleitung

KN04-00003A

Date : February. 2004

Manual Reversion 2.3

STP-103S / STP-103P

Operator’s Manual

POWER ERROR

FEED ON LINE

ELECTRO-MECHANICS TEL : 82-31-218-5594

FAX : 82-31-218-5589

http://www.samsungminiprinters.com

Safety Precautions

In using the present appliance, please keep the following safety

regulations in order to prevent any hazard or material damage.

Violating following instructions can cause serious injury or death.

Do not plug several products in one

multi-outlet.

This can provoke over-heating and a fire.

If the plug is wet or dirty, dry or wipe it

before usage.

If the plug does not fit perfectly with the

outlet, do not plug in.

Be sure to use only standardized multi-

outlets.

You must use only the supplied adapter.

It is dangerous to use other adapters.

Do not pull the cable to unplug.

This can damage the cable, which is the

origin of a fire or a breakdown of the printer.

Keep the plastic bag out of children’s reach.

If not, a child may put the bag on his head.

Do not plug in or unplug with your hands

wet.

You can be electrocuted.

Do not bend the cable by force or leave it

under any heavy object.

A damaged cable can cause a fire.

If you observe a strange smoke, odor or

noise from the printer, unplug it before

taking following measures.

Switch off the printer and unplug the set from

the mains.

After the disappearance of the smoke, call

your dealer to repair it.

WARNING

PROHIBITED

ONLY SUPPLIED ADAPTER

TO UNPLUG

PRINTER

PROHIBITED

Violating following instructions can cause slight wound or damage the appliance.

Keep the desiccant out of children’s

reach.

If not, they may eat it.

Install the printer on the stable surface.

If the printer falls down, it can be broken

and you can hurt yourself.

Use only approved accessories and do

not try to disassemble, repair or remodel

it for yourself.

Call your dealer when you need these

services.

Do not use the printer when it is out of

order. This can cause a fire or an

electrocution.

Switch off and unplug the printer before

calling your dealer.

Do not let water or other foreign objects

in the printer.

If this happened, switch off and unplug the

printer before calling your dealer.

WARNING

PROHIBITED

PRINT.ER

PRINER

DISASSEMBLING

PROHIBITED

PRINTER

PROHIBITED

PRINTER

DEALER

TO UNPLUG

PROHIBITED

Warning – U.S

This equipment has been tasted and found to comply with the limits for a Class A

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and uses in accordance with the

instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful

interference in which case the user will be required to correct the interference at his

own expense.

This equipment has been tasted and found to comply with the limits for a Class B

digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

Notice - Canada

This Apparatus complies with class "A" limits for radio interference as specified in

the Canadian department of communications radio interference regulations.

Introduction

The STP-103 and STP-103P Roll Printer are designed for use with electronic

instruments such as system ECR, POS, banking equipment peripheral equipment,

etc.

The main features of the printer are as follows:

1. High speed printing.

2. Low noise thermal printing.

3. RS-232 serial interface (STP-103S), Parallel interface (STP-103P).

4. The data buffer allows the unit to receive print data even during printing.

5. Different print densities can be selected by DIP switches.

Please be sure to read the instruction in this manual carefully before using your new

STP-103S and STP-103P.

NOTE

The socket-outlet shall be near the equipment and it shall be easy accessible.

Table of Contents

Chapter 1. Unpacking

1-1. Checking the contents of the Printer

1-2. Locating the Printer

1-3. Printer Part names

1-4. Operating Control Panel

Chapter 2. Connecting the cable

2-1. Connecting the AC adapter to your printer

2-2. Connecting the Printer to your computer

Chapter 3. Installing the Paper Roll

Chapter 4. Setting the DIP Switching

Chapter 5. Running the Self Test

Chapter 6. Hexadecimal Dumping

Chapter 7. Code Table

Chapter 8. Functions

Chapter 9. Control Commands

APPENDIX A - Connectors

- Serial Type (STP-103S)

- Parallel Type (STP-103P)

APPENDIX B - Specification

...........................................................7

........................................................7

..................................................................................7

...................................................................................8

...........................................................................9

........................................10

.............................................10

...............................................11

...................................13

................................14

.......................................16

.....................................17

........................................................18

..........................................................27

..........................................29

..........................................................................51

........................................................51

......................................................51

.........................................................................52

Chapter 1. Unpacking

1-1. Checking the contents of the Printer

The items illustrated below are included with your printer.

If any items are damaged or missing, please contact your dealer for assistance.

Unpacking

Roll paper

Adaptor

Power cord

Cable

Printer

1-2. Locating the Printer

Avoid location in direct sunlight or excessive heat.

Avoid or storing the printer in the place subject to excessive moisture.

Do not use or store, horizontal surface for the printer. Avoid places subject to

intense vibration or shock.

Make sure that there is enough space around the printer so that it can be used

easily.

1-3. Printer Part Names

(1)

(4) (3)

(2)

(5)

(10)

(11) Rear View

Rear View

STP-103S STP-103P

(6) (7) (8) (9)

Control Panel

POWER ERROR FEED ON LINE

(1) Cover top

(2) Case top

(3) Case bottom

(4) Control panel

(5) Roller

(6) Power switch

(7) Interface connector (male)

(8) DC Jack

(9) Interface connector (female)

(10) Roll paper

(11) Detector switch

1-4. Operating Control Panel

The control panel has two buttons and two lights.

POWER ERROR FEED ON LINE

Buttons

The control panel buttons perform paper feeding and on line function.

ON LINE

Press the ON LINE button to ready to receive data from the computer.

FEED

Press the FEED button once to advance paper one line. You can also press the

FEED button continuously to feed paper continuously.

Feed button is valid when ON LINE button is off.

Indicator Lights

The control panel lights provide information on printer conditions.

POWER (green)

The POWER light is on when the printer power is on.

ERROR (red)

1) The error LED blinks fast when paper is out.

2) The error LED blinks when the Near End Sensor triggered.

Chapter 2. Connecting the Cable

2-1. Connecting the AC adapter to your printer

When the printer is used, use the optional AC adapter, NH36-240150-I1 for your

printer.

WARNING

Using an incorrect power supply may cause fire or electrical.

CAUTION

When connecting or disconnecting the power supply from the printer, make sure

that the power supply is not plugged into an electrical outlet ; otherwise you may

damage the power supply or the printer

1. Make sure that the printer's power switch is turned off, and that the power

supply's power cord is unplugged from the electrical outlet.

2. Check the label on the power supply to make sure that the required voltage

matches that of your electrical outlet.

3. Plug the power supply's DC cable connector into the printer's power connector as

shown below.

STP-103S / STP-103P

4. Plug the AC adapter's power cord into an electrical outlet.

NOTE

To remove the DC cable connector grasp the connector at the arrow and pull it

straight out. Make sure that the main unit's power cord is unplugged before you

disconnect the DC cable connector.

2-2. Connecting the printer to your Computer

STP-103S

You need an appropriate serial interface cable to connect your computer to the

printer's built-in interface.

1. Make sure that both the printer and computer are turned off :

then plug the cable connector securely into the printer's interface connector.

2. Tighten the screws on both sides of the cable connector.

3. Plug the other end of the cable into the computer.

25 Pin Female Type

2-2. Connecting the printer to your Computer

STP-103P

You need an appropriate parallel interface cable to connect your computer to the

printer's built-in interface.

1. Make sure that both the printer and computer are turned off :

then plug the cable connector securely into the printer's interface connector.

2. Tighten the screws on both sides of the cable connector.

3. Plug the other end of the cable into the computer.

25 Pin Female Type

Chapter 3. Installing the Paper Roll

Use a paper roll that matches the specifications.

NOTE

The printer must be turned off before installing the paper roll.

1. Open the printer cover and remove the used paper roll core if there is one.

2. Insert the paper roll as shown below.

3. Pull out the paper roll until the paper comes out from the top of the printer. Then

close the printer cover.

4. Turn on the Printer.

Chapter 4. Setting the DIP Switches

CAUTION

Turn off the printer while setting the DIP switch to prevent an electrical short, which

can damage the printer.

You can change your interface and printer density settings by changing the DIP

switch setting.

1. Make sure the printer is turned off.

2. There are a switch. Notice that ON is marked on each set of switches.

Use tweezers or another narrow tool to move the switches.

3. Use the following tables to set the DIP switches.

DIP Switch Functions

BPS SW1 SW2 SW3 Default

2400 bps On Off Off

4800 bps Off On Off

9600 bps Off Off On

19200 bps On Off On

38400 bps On On Off

57600 bps Off On On

115200 bps On On On

9600

SW Function On Off Default

SW4 Density Dark Normal Normal

SW5 Handshaking Xon/Xoff RTS/CTS RTS/CTS

(DTR/DSR)

SW8 Firmware

Download Download Printing Printing

SW7 SW6

Language CPL

Default

On 24

On English Off 32

On Johap

Off Korean Off Wansung

English

32CPL

Chapter 5. Running the Self-test

1. Self-test printing

1) Starting the self test

To start printing the self-test on a paper roll, hold down the PAPER FEED

button and turn on the printer with the cover closed. The self-test prints the

current printer settings, which provide the following information :

- control software version

- dip switch state

2) Standby state

After printing the current printer status, the printer prints the message

"Please press the FEED BUTTON.". The LED indicator blinks and the

printer enter the test printing standby state.

Press the FEED BUTTON to start test printing.

2. Ending the self-test

After a number of lines are printed, the printer indicates the end of the

self-test by printing " ** TEST COMPLETED ** ".

If the self-test is not completed, then you must reboot your printer.

Chapter 6. Hexadecimal Dumping

This feature allows experienced users to see exactly what data is coming to the

printer. This can be useful in finding software problems. When you turn on the

hexadecimal dump function, the printer prints all commands and data in

hexadecimal format along with a guide section to help you find specific commands.

To use the hexadecimal dump function, follow these steps:

1. After you make sure that the printer is off. Close the cover.

2. Turn on the printer, while holding down the FEED button and ONLINE button.

3. Then the printer enters the hexadecimal dump mode.

4. Run any software program that sends data to the printer. The printer will print all

the codes it receives in a two-column format. The first column contains the

hexadecimal codes and the second column gives the ASCII characters that

corresponds to the codes.

1B 21 00 1B 26 02 40 40 . ! . . & . @ @

1B 25 01 1B 63 34 00 1B . % . . c4 . .

41 42 43 44 45 46 47 48 ABCDEFGH

• A period (.) is printed for each code that has no ASCII equivalent.

• During the hex dumping, any commands other than DEL EOT and DLE ENQ

do not function.

5. When the printing finishes, turn off the printer.

6. Turn on the printer and then the hexadecimal mode is off.

Chapter 7. Code Table

The following pages show the character code tables. To find the character

corresponding to a hexadecimal number, count across the top of the table for the

For example, 4A=J.

PC437 : USA, Standard Europe

Page1 : KATAKANA

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Samsung Drucker Handbücher

Samsung

Samsung ML-3561N Series Bedienungsanleitung

Samsung

Samsung ML-2545 Series Bedienungsanleitung

Samsung

Samsung SCX-4655F Bedienungsanleitung

Samsung

Samsung ML 2851ND - B/W Laser Printer Bedienungsanleitung

Samsung

Samsung 2 COLOR THERMAL PRINTER SRP-275 Bedienungsanleitung

Samsung

Samsung CLP 610ND - Color Laser Printer Bedienungsanleitung

Samsung

Samsung SF-330 Series Bedienungsanleitung

Samsung

Samsung ML-1610 - B/W Laser Printer Benutzerhandbuch

Samsung

Samsung ML-6060 Bedienungsanleitung

Samsung

Samsung ML-6000 Bedienungsanleitung

Samsung

Samsung ML-4500/XAA Bedienungsanleitung

Samsung

Samsung CLP 660ND - Color Laser Printer Bedienungsanleitung

Samsung

Samsung ML-2850D Bedienungsanleitung

Samsung

Samsung ML-1630W - Personal Wireless Mono Laser... Bedienungsanleitung

Samsung

Samsung CLP-300 Bedienungsanleitung

Samsung

Samsung ML-2251N/XAA Bedienungsanleitung

Samsung

Samsung ML-1670 Bedienungsanleitung

Samsung

Samsung ML-2525 Bedienungsanleitung

Samsung

Samsung Lazett ML-1250 Bedienungsanleitung

Samsung

Samsung Xpress SL-M2835DW/XAA Bedienungsanleitung

Samsung

Samsung ML-1865W Bedienungsanleitung

Samsung

Samsung ML-4050N Bedienungsanleitung

Samsung

Samsung SF-5100I Bedienungsanleitung

Samsung

Samsung MultiXpress K220x Series Bedienungsanleitung

Beliebte Drucker Handbücher anderer Marken

Canon

Canon i70 Series Bedienungsanleitung

Evolis

Evolis Elypso Bedienungsanleitung

Kyocera

Kyocera FS-9530DN Bedienungsanleitung

Canon

Canon LASER SHOT LBP-1210 Bedienungsanleitung

Canon

Canon PIXMA PRO-1 Series Bedienungsanleitung

Canon

Canon PIXMA G3560 Einrichtungshandbuch

Dell

Dell Color Laser Printer 2130cn Bedienungsanleitung

Tektronix

Tektronix Phaser 840 Bedienungsanleitung

Brother

Brother 1440 - HL B/W Laser Printer Kurzanleitung

Fuji Xerox

Fuji Xerox DocuPrint P375 dw Bedienungsanleitung

WOOSIM

WOOSIM PORTI-S30 Bedienungsanleitung

Olivetti

Olivetti PG L2140 Bedienungsanleitung

Konica Minolta

Konica Minolta bizhub 224e Bedienungsanleitung

Canon

Canon LBP113w Bedienungsanleitung

Xerox

Xerox DocuColor 5000 Bedienungsanleitung

Canon

Canon PRO-500 Series Einrichtungshandbuch

Epson

Epson ET-7750 Betriebsanleitung

Lexmark

Lexmark Infoprint 1332 Bedienungsanleitung