Sangean WR-11BT Montageanleitung

WR-11BT

中文

Version 1

IMPORTANT SAFETY INSTRUCTIONS

10.

Read these instructions.

Keep these instructions.

Heed all warnings.

Follow all instructions.

Do not use this apparatus near water.

Clean only with dry cloth.

Do not block any ventilation openings. Install in accordance

with the manufacturer’s instructions.

Do not install near any heat sources such as radiators, heat

registers, stoves, or other apparatus (including ampliers) that

produce heat.

Do not defeat the safety purpose of the polarized or grounding-type

plug. A polarized plug has two blades with one wider than the

other. A grounding type plug has two blades and a third grounding

prong. The wide blade or the third prong are provided for your

safety. If the provided plug does not t into your outlet. consult

an electrician for replacement of the obsolete outlet.

Protect the power cord from being walked on or pinched particularly

at plugs, convenience receptacles, and the point where they

exit from the apparatus.

11.

12.

13.

14.

15.

16.

17.

18.

Only use attachments/accessories specied by the manufacturer.

Use only with the cart, stand, tripod, bracket, or table specied by

the manufacturer, or sold with the apparatus. When a cart is used,

use caution when moving the cart/apparatus combination to avoid

injury from tip-over.

Unplug this apparatus during lightning storms or when unused for

long periods of time.

Refer all servicing to qualied service personnel. Servicing is required

when the apparatus has been damaged in any way, such as

power-supply cord or plug is damaged. liquid has been spilled or

objects have fallen into the apparatus, the apparatus has been

exposed to rain or moisture, does not operate normally, or has

been dropped.

To Reduce the Risk of Fire or Electric Shock, Do not Expose This

Appliance To Rain or Moisture.

The Shock Hazard Marking and Associated Graphical Symbol is

provided on the bottom panel of unit.

Apparatus shall not be exposed to dripping or splashing and no

objects lled with liquids, shall not be placed on the apparatus.

Excessive sound pressure on ear- and headphones could impair

the hearing ability. Higher setting that idle on the equalizer leads to

higher signal voltages on the output for ear and headphones.

Controls

Power and AM/FM band switch

Volume Control

Speaker

Dial scale

Dial indicator

Tuning Control

AC power cord socket

12V DC input socket ( ideal for vehicles/boats )

Headphone socket

REC out socket

Aux in socket

External/Internal antenna switch

F-type external antenna terminal

NFC detection area

Tuning LED indicator

Power your radio

AC operation

Before you plug the AC cord into the radio, be sure the AC voltage

is correct. Insert the plug on the end of the supplied power cord

into the AC power socket on the back of the radio.

DC operation

For outdoors use, you can power the radio by using 12V DC input

socket from a DC power supply (example, from the power supply of

vehicles or boats). An AC power adaptor with 1 Ampere and center

positive in polarity can also power the radio in house.

Operating your radio FM

1. Connect the Antenna

The radio comes with built-in AM/FM antenna. To improve FM

reception, insert the end of the supplied FM wire antenna into the

F-type antenna terminal and adjust the wire for best reception. A

75 ohm coaxial cable of outdoor antenna may also be attached

to the terminal. Be sure to switch external/internal antenna switch

to external position while using the supplied wire antenna or connect

the outdoor antenna. In some of the European countries, you

may have to connect the supplied antenna terminal adaptor to

connect with the outdoor antenna.

2. Turn on your radio by switching the Power knob to FM position.

3. Rotate the Tuning Control to select the desired station. On FM,

the tuning scale is marked in MHz (Megahertz). The tuning LED

indicator will appear brightest when best tuning has been achieved.

4. Adjust the Volume Control for comfortable listening.

5. To switch off the radio , turn the Power knob to OFF position.

Operating your radio AM

1. Connecting the antenna

The radio comes with built-in AM antenna which should be enough

for normal listening. To improve the AM reception, you may connect

the outdoor AM antenna with AM antenna terminal (USA version only).

2. Turn on your radio by switching the Power knob to AM position.

3. Rotate the Tuning Control to select the desired station. On AM,

the tuning scale is marked in kHz (Kilohertz). The tuning LED will

appear brightest when best tuning has been achieved.

4. Rotate your radio for best reception.

5. Adjust the Volume Control for comfortable listening.

6. To switch off your radio , turn the power knob to OFF position.

Listening to Bluetooth music

You need to pair your Bluetooth device with your radio before you

can auto-link to play/ stream Bluetooth music through your WR-11BT.

Paring creates a `bond' so two devices can recognize each other.

Pairing your Bluetooth device for the rst time

1. Rotate the Band selecting rotary to select Bluetooth function.

The Bluetooth icon on the panel will ash.

2. Activate Bluetooth on your device according to the device's user

manual to link to your WR-11BT. With some mobiles which

are equipped with earlier versions than BT2.1 Bluetooth device,

you may need to input the pass code “0000”.

3. Once connected, there will be a beep sound and the Bluetooth

icon will remain illuminated. You can now play the music in your

Bluetooth-enabled device via WR-11BT.

Note:

1) If there are 2 Bluetooth devices searching for WR-11BT, it will

show its availability on both devices. However, if one device links

with the WR-11BT first, then the other Bluetooth device won't

nd the WR-11BT on its list.

2) If your Bluetooth-enabled device is temporarily disconnected to

your WR-11BT. As long as the disconnection last within 1 minutes,

your device can re-connect with your radio again automatically.

If the disconnection last more than 1 minutes, then you need to

manually reconnect your device again to the radio. Be aware

that during the period of disconnection, no other Bluetooth device

can pair or link with your radio.

3) If ‘SANGEAN WR-11BT’ shows in your Bluetooth device list but

your device cannot connect with it, please delete the Sangean

WR-11BT item from your list and pair the device with WR-11BT

again following the steps described previously.

4) The effective operation range between the system and the

paired device is approximately 10 meters (30 feet).

5) Any obstacle between the system and the device can reduce the

operational range.

Pair with your Bluetooth device before

If your Bluetooth device already paired with WR-11BT previously,

the unit will memorize your Bluetooth device, but it does not support

the automatic reconnection, reconnect with this product following

the steps above.

WR-11BT can memorize up to 8 sets of Bluetooth device, when the

memory exceed this amount, the earliest paired device will be

cancelled from the radio.

Disconnecting your Bluetooth device

Rotate the Band selecting rotary to any bands other than Bluetooth

band or disconnect the Bluetooth-enabled device. The LED light for

Bluetooth icon will then start to ash indicating deactivation of Bluetooth.

Pairing and playing your device via NFC

WR-11BT is equipped with wireless NFC (Near Field Communication)

feature, allowing playing NFC-enabled devices to pair and play the

music. For non-NFC devices, please refer to the above sections for

standard Bluetooth pairing.

1. Rotate the Band selecting rotary to select Bluetooth function.

The Bluetooth icon on the panel will ash.

2. Turn on your NFC feature on your device.

3. Touch the NFC area of your playing device against the NFC area

marked on top of WR-11BT. The unit will turn on and enter automatic

pairing mode. If you pair with WR-11BT for the first time, your

NFC-enabled device will be asked the permission to link with the

radio. Once paired with a device, there will be a beep sound and

the Bluetooth icon will remain illuminated.

4. Use the controls on your device to play/ pause and navigate tracks.

Note:

1. If you would like to link another Bluetooth device via NFC,

disconnect the existing linked Bluetooth device rst.

2. The location of the NFC detection area is not the same on all

devices. When connecting with other Bluetooth device via NFC,

refer to the User guide of the other device for more information.

3. Some of metallic case or cover for mobile phones may reduce

the sensitivity of NFC. Make sure you remove it, before activating

the NFC.

Inhaltsverzeichnis

Andere Sangean Tragbares Radio Handbücher

Sangean

Sangean DT-120CL Bedienungsanleitung

Sangean

Sangean U-3 Bedienungsanleitung

Sangean

Sangean PR-D8 Bedienungsanleitung

Sangean

Sangean DT-220 Bedienungsanleitung

Sangean

Sangean DT-220V Bedienungsanleitung

Sangean

Sangean DT-110CL Bedienungsanleitung

Sangean

Sangean WFR-32 Bedienungsanleitung

Sangean

Sangean DPR-17 Bedienungsanleitung

Sangean

Sangean PR-D5CL Bedienungsanleitung

Sangean

Sangean ATS-404 Bedienungsanleitung

Sangean

Sangean H201 Bedienungsanleitung

Sangean

Sangean PR-D17 Bedienungsanleitung

Sangean

Sangean DT-110CL Bedienungsanleitung

Sangean

Sangean ATS-818 Bedienungsanleitung

Sangean

Sangean MMR-77 Bedienungsanleitung

Sangean

Sangean Sangean- RCR-3 Bedienungsanleitung

Sangean

Sangean ATS-606A Bedienungsanleitung

Sangean

Sangean H201 Betriebsanleitung

Sangean

Sangean PR-D9W - Bedienungsanleitung

Sangean

Sangean WR-1 Bedienungsanleitung

Sangean

Sangean DT-300 Bedienungsanleitung

Sangean

Sangean DT-110 Betriebsanleitung

Sangean

Sangean SR-36 Bedienungsanleitung

Sangean

Sangean PT 10 Bedienungsanleitung

Beliebte Tragbares Radio Handbücher anderer Marken

Telefunken

Telefunken P5 Bedienungsanleitung

Tait

Tait TP9300 Bedienungsanleitung

Lafayette

Lafayette Guardian 5500 Bedienungsanleitung

Sailor

Sailor SP3300 Bedienungsanleitung

Matra Nortel

Matra Nortel MC 6500 Bedienungsanleitung

Hytera

Hytera PD362i Bedienungsanleitung

Vertex Standard

Vertex Standard VX-P920 Series Bedienungsanleitung

Roberts

Roberts Ecologic 3 Bedienungsanleitung

LENCO

LENCO IPD-5100 Bedienungsanleitung

Baofeng

Baofeng BF-82 Bedienungsanleitung

Trevi

Trevi RA 764 Bedienungsanleitung

M/A-Com

M/A-Com P5100 Series Bedienungsanleitung

Elta

Elta 6699 Bedienungsanleitung

PURE

PURE ONE classic Series II Bedienungsanleitung

Teac

Teac PR130 Bedienungsanleitung

Philips

Philips AE6370 Bedienungsanleitung

Simoco

Simoco SRP9170 Bedienungsanleitung

Audiovox

Audiovox FR14 Bedienungsanleitung