Sanus SONOS WSWM Bedienungsanleitung

We’ll Make It Stress-Free

If you have any questions along the way, just give us a call.

1-800-359-5520 We’re ready to help!

WSWM SONOS®SPEAKER MOUNT INSTRUCTION MANUAL

CAUTION:

IMPORTANT SAFETY INSTRUCTIONS —PLEASE READ ENTIRE MANUAL PRIOR TO USE —SAVE THESE INSTRUCTIONS

Do you own a Sonos®PLAY:1™or PLAY:3™speaker?

This speaker mount is designed to support PLAY:1 and PLAY:3 speakers.

Weight Limit: 10 lb (4.5 kg)

Ready to begin?

Check your speaker owner’s manual to see if there are any special requirements for mounting your speaker.

Please read through these instructions completely to be sure you’re comfortable with this easy install process.

Do not use this product for any purpose not explicitly speciﬁed by manufacturer.

Manufacturer is not responsible for damage or injury caused by incorrect assembly or use.

The wall must be capable of supporting ﬁve times the weight of the speaker and mount combined.

If you do not understand these instructions or have doubts about the safety of the installation, assembly or use of this product, contact

Customer Service at 1-800-359-5520 (UK: 0800-056-2853).

Do you have all the tools needed?

Before getting started, let’s make sure this product is perfect for you!

Wood Stud Install

Concrete Install

Wallboard Install

Pencil Level Screw

driver Electric

Drill Stud

Finder Awl Wood

Drill Bit Masonry

Drill Bit Hammer

Wallboard

Drill Bit

1/4 in.

(6.4 mm)

1/4 in.

(6.4 mm)

1/8 in.

(3 mm)

SPEAKER INTERFACE

WALL PLATE

SIDE VIEW - NO SPEAKER

TOP VIEW - SONOS PLAY:1

TOP VIEW - SONOS PLAY:3

SIDE VIEW - SONOS PLAY:1

SIDE VIEW - SONOS PLAY:3

3-D

2xø0.26 in.

[6.6mm]

ø0.20 in.

[5.1mm]

THRU ø3.00 in.

[76.3mm]

PLAY:3 BRACKET

(INCLUDED)

8.81 in.

[223.9mm]

TRUE ø0.20 in.

[5.1mm]

2.78 in.

[70.5mm]

3.98 in.

[101.2mm]

0.45 in.

[11.5mm]

2.21 in.

[53.3mm]

3.83 in.

[97.3mm]

1.99 in.

[50.6mm]

35º

70º

132º

27º

30º

9.05º

66º

Dimensions

NOTE: Not all hardware included will be used.

WARNING: This product contains small items that could be a choking hazard if swallowed.

Before starting assembly, verify all parts are included and undamaged. If any parts are missing or damaged, do not return the damaged item to

your dealer; contact Customer Service. Never use damaged parts!

Supplied Parts and Hardware

STEP 1 Parts and Hardware STEP 2 Parts and Hardware

Wall Plate Screw

Mount

Wall Plate

Anchor

#10 x 1¾ in.

AF6Toggler

01 x1 04 x1

02 x2

03 x2

STEP 3 Parts

Play:3 Interface

Cap

Play:1 / Play:3 Screw

Play:3 Interface Screw

1/4-20 x 1/2 in.

10-24 x 1/2 in.

STEP 2 Parts and Hardware (cont.)

08 x1

05 x1

06 x1

07 x1

2 31

1. Make sure that the placement of the wall plate 01 is not on a stud. Position the wall plate 01 at your desired height and level the wall plate 01 and mark

the hole locations.

2. Drill pilot holes using a 1/4 in. (6.4 mm) diameter drill bit.

3. Install 2 anchors 03 into the holes making sure that they are flush with the wallboard.

CAUTION: Avoid potential personal injury or property damage!

ƕDrywall covering the wall, must not be less than 1/4 in. (6.4 mm)

Max. 1/4 in.

(6.4 mm)

STEP 1A Attach Wall Plate to Wall

Wallboard Option

4. Install the wall plate 01 with the two wall plate screws. 02 .

CAUTION: Avoid potential personal injury or property damage! Both screws 02 MUST BE firmly tightened to prevent unwanted movement of the wall

plate 01 .Ensure the wall plate is securely fastened to the wall before continuing on to the next step.

NOTE:If needed, you can

make small level adjustments

to the wall plate 01 by

loosening the bottom screw

02 and shifting the wall

plate 01 until level. Tighten

the bottom screw 02 when

adjustments are complete.

01 01

2 31

1. Locate your stud. Verify and mark the center of the stud by finding the stud edges using an awl, a thin nail, or an edge to edge stud finder.

2. Position the wall plate 01 at your desired height and line up the holes with your stud center line. Level the wall plate 01 and mark the hole locations.

3. Drill pilot holes using a 1/8 in. (3 mm) diameter drill bit.

IMPORTANT: Pilot holes must be drilled to a depth of 1 ¾ in. (45 mm). Be sure to drill into the center of the stud.

ƕDrywall covering the wall, must not exceed 5/8 in. (16 mm)

ƕMinimum wood stud size: nominal 2 x 4 in. (51 x 102 mm) actual 1½ x 3½ in. (38 x 89 mm)

ƕStud center must be verified

1/8 in.

(3 mm)

1 ¾ in. (45 mm)

Max. 5/8 in.

(16 mm)

CAUTION: Avoid potential personal injury or property damage!

STEP 1B Attach Wall Plate to Wall

Wood Stud Option

4. Install wall plate 01 using two screws 02 . Tighten the screws 02 only until they are pulled firmly against the wall plate 01 .

CAUTION: Avoid potential personal injury or property damage! Both screws 02 MUST BE firmly tightened to prevent unwanted movement of the wall

plate 01 .Ensure the wall plate is securely fastened to the wall before continuing on to the next step.

NOTE:If needed, you can

make small level adjustments

to the wall plate 01 by

loosening the bottom screw

02 and shifting the wall

plate 01 until level. Tighten

the bottom screw 02 when

adjustments are complete.

1. Position the wall plate 01 on the wall at your desired height. Level the wall plate 01 and mark the hole locations.

2. Drill two pilot holes using a 1/4 in. (6.4 mm) diameter masonry drill bit.

IMPORTANT: Pilot holes must be drilled to a depth of 2 in. (50 mm). Never drill into the mortar between blocks.

3. Insert two anchors 03 .

CAUTION: Be sure the anchors 03 are seated flush with the concrete surface.

ƕMount the wall plate 01 directly onto the concrete surface

ƕMinimum solid concrete thickness: 8 in. (203 mm)

ƕMinimum concrete block size: 8 x 8x 16 in. (203 x 203 x 406 mm)

2 31

1/4 in.

(6.4 mm)

2 in. (50 mm)

CAUTION: Avoid potential personal injury or property damage!

STEP 1C

Attach Wall Plate to Wall

Solid Concrete or Concrete Block Option

Andere Sanus Rack & Stand Handbücher

Sanus

Sanus WMS2 Bedienungsanleitung

Sanus

Sanus MF110 Bedienungsanleitung

Sanus

Sanus HTB7 Bedienungsanleitung

Sanus

Sanus LMT1 Bedienungsanleitung

Sanus

Sanus SAN18B Bedienungsanleitung

Sanus

Sanus VST4 Bedienungsanleitung

Sanus

Sanus VisionMount MT25 Bedienungsanleitung

Sanus

Sanus CFR115 Bedienungsanleitung

Sanus

Sanus BLT3 Bedienungsanleitung

Sanus

Sanus WSEDM2 Bedienungsanleitung

Sanus

Sanus CAPS27 Bedienungsanleitung

Sanus

Sanus SLF9 Bedienungsanleitung

Sanus

Sanus CFR2115 Bedienungsanleitung

Sanus

Sanus WSSATM1 Bedienungsanleitung

Sanus

Sanus Sanus VisionMount ML22 Bedienungsanleitung

Sanus

Sanus VMF518 Bedienungsanleitung

Sanus

Sanus Secura QLL12 Bedienungsanleitung

Sanus

Sanus WSWM21 Bedienungsanleitung

Sanus

Sanus VSF716-B2 Bedienungsanleitung

Sanus

Sanus VLT35-B1 Bedienungsanleitung

Sanus

Sanus VLF510 Bedienungsanleitung

Sanus

Sanus VLL61 Bedienungsanleitung

Sanus

Sanus VUEPOINT F22 Bedienungsanleitung

Sanus

Sanus WSECS1-B2 Bedienungsanleitung

Beliebte Rack & Stand Handbücher anderer Marken

Salamander

Salamander Acadia AC/W/L400/WH Bedienungsanleitung

Fohhn

Fohhn VAT-09 Benutzerhandbuch

ricoo

ricoo FS0522 Bedienungsanleitung

AMSOIL

AMSOIL BMK-22 Kurzanleitung

Kargo Master

Kargo Master 48220 Bedienungsanleitung

Milestone AV Technologies

Milestone AV Technologies SIMPLICITY SLF2 Bedienungsanleitung

ricoo

ricoo S1222 Bedienungsanleitung

Ready-Set-Mount

Ready-Set-Mount RSMCM602 Bedienungsanleitung

VidaBox

VidaBox VB MNT FFS2 Bedienungsanleitung

Welch Allyn

Welch Allyn 48960 Bedienungsanleitung

Arkon

Arkon CM035-ST-2 Bedienungsanleitung

PROEL

PROEL PLWIN60C Bedienungsanleitung

Agilent Technologies

Agilent Technologies E2609B Bedienungsanleitung

Mustang

Mustang MV-ARM4 Bedienungsanleitung

Mounting Solutions

Mounting Solutions WRM-320 Bedienungsanleitung

ShelterIt

ShelterIt 21208 Bedienungsanleitung

Pyle

Pyle PMKSPAD1 Bedienungsanleitung

SPL

SPL RackPack?4 1040 Bedienungsanleitung