Sanyo VCC-5984 Bedienungsanleitung

INSTRUCTIONMANUAL VCC-5984

COLORCCDCAMERA

About this manual

Before installing and using the camera, please read this manual

carefully. Be sure to keep it handy for later reference.

L53H4/US2 (VCC-5984) GB 2003, 1, 7

Depending on the conditions of use, installation and environment,

please be sure to make the appropriate settings and adjustments. If you

need help with installation and/or settings, please consult your dealer.

CONTENTS

INFORMATION TO USER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

PARTS NAMES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

CONCERNING AUTO-IRIS LENSES . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

MOUNTING THE LENS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

CONNECTIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

ACCESSORIES

1Lens iris plug ( -pin)..................................................................1 pc.

FEATURES

•Built-in interline transfer method 1/3" CCD, approx. 10,000

picture elements

•Equipped with a DSP (Digital Signal Processor) function

•Horizontal resolution, more than 520 TV lines

•High sensitivity, minimum required illumination is 0.3 lux (F1.2,

AGC gain HI position)

•Two types of backlight compensation functions (multi-spot

photometry and center focus photometry)

•Low smear, anti-blooming, low lag, no burning and no geometric

distortion using the CCD solid state image device.

•100% solid state components giving excellent immunity to shock

and vibration

•Not subject to interference from magnetic or electrostatic fields

•Power supply: 2 V AC operation

L53H /US2 (VCC-598 ) GB 2003, 1, 7

English 1

INFORMATION TO USER

Safety Guard

THIS SYMBOL INDICATES THAT THERE ARE

IMPORTANT OPERATING AND MAINTENANCE

INSTRUCTIONS IN THE LITERATURE

ACCOMPANYING THIS UNIT.

WARNING:

TO PREVENT THE RISK OF FIRE OR ELECTRIC SHOCK , DO NOT

EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

This installation should be made by a qualified service person and

should conform to all local codes.

For th custom rs in Canada

This Class B digital apparatus complies with Canadian ICES-003.

Pour la cli ntèl canadi nn

Cet appareil numerique de la Classe B est conforme a la norme

NMB-003 du Canada.

This equipment has been tested and found to comply with the limits

for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications.

However, there is no guarantee that interference will not occur in

a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of

the following measures:

– Reorient or relocate the receiving antenna.

– Increase the separation between the equipment and receiver.

– Connect the equipment into an outlet on a circuit different

from that to which the receiver is connected.

– Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) This device may not

cause harmful interference, and (2) this device must accept any

interference received, including interference that may cause

undesired operation.

Changes or modifications not expressly approved by Sanyo may

void the user’s authority to operate this camera.

L53H /US2 (VCC-598 ) GB 2003, 1, 7

2English

PRECAUTIONS

In cas of probl m

Do not use the camera if smoke or a strange odour comes from the

unit, or if it seems not to function correctly. Disconnect the power

cord immediately, and consult your dealer (or a Sanyo Authorized

Service Centre).

Do not op n or modify

Do not open the cabinet, as it may be dangerous and cause damage

to the unit. For internal settings and repairs, consult your dealer (or a

Sanyo Authorized Service Centre).

Do not put obj cts insid th unit

Make sure that no metal objects or flammable substance get inside

the camera. If used with a foreign object inside, it could cause a fire,

short-circuits or damages.

If water or a liquid gets inside the camera, disconnect the power cord

immediately, and consult your dealer (or a Sanyo Authorized Service

Centre). Be careful to protect the camera from rain, sea water, etc.

B car ful wh n handling th unit

To prevent damages, do not drop the camera or subject it to strong

shock or vibration.

Install away from l ctric or magn tic fi lds

If installed close to a TV, radio transmitter, magnet, electric motor,

transformer, audio speakers the magnetic field they generate will

distort the image.

Prot ct from humidity and dust

To prevent damages to the camera, do not install it where there is

greasy smoke or steam, where the dampness may get too high, or

where there is a lot of dust.

Prot ct from high t mp ratur s

Do not install close to stoves, or other heat generating devices, such

as spotlights, etc., or where it could be subject to direct sunlight, as

that could cause deformation, discoloration or other damages.

Be careful when installing close to the ceiling, in a kitchen or boiler

room, as the temperature may raise to high levels.

Install where the temperature range will stay between –10°C and

50° C.

(no condensation)

Cl aning

•Dirt can be removed from the cabinet by wiping it with a soft

cloth. To remove stains, wipe with a soft cloth moistened with a

soft detergent solution and wrung dry, then wipe dry with dry soft

cloth.

•Do not use benzine, thinner or other chemical product on the

cabinet, as that may cause deformation and paint peeling. Before

using a chemical cloth, make sure to read all accompanying

instructions. Make sure that no plastic or rubber material comes in

contact with the cabinet for a long period of time, as that may

cause damage or paint peeling.

L53H /US2 (VCC-598 ) GB 2003, 1, 7

English 3

PARTS NAMES

1Vid o output conn ctor (VIDEO OUT: BNC typ )

Connect this connector to a device such as a VCR or monitor with a VIDEO IN connector.

2Pow r input t rminal

2 V AC input terminal (AC 2 V, GND)

3Ext rnal sync composit vid o signal input conn ctor (VBS IN: BNC typ )

Connect to this connector the synchronizing signal output from a synchronizing signal device or the composite

signal of a video distributor.

4Pow r indicator (POWER)

Comes on when the power to the camera is on.

L53H /US2 (VCC-598 ) GB 2003, 1, 7

4English

PARTS NAMES

5L ns mount cap

The cap is installed to protect the lens mount section.

Remove the lens mount cap before installing a lens (sold separately).

6Flang -back adjustm nt scr w (FLANGE BACK ADJ.)

7Flang -back lock scr w (FLANGE BACK LOCK)

8Cam ra installation brack t

The bracket can be fixed at the top or bottom of the camera. When fixing the bracket, be sure to use the

longer screws and install the shorter screws on the opposite side to seal the openings.

CAUTION:

Wh n installing th cam ra support, s l ct a location that can support th total w ight of th

cam ra and acc ssori s.

1Short r scr ws: M3 x 4

2Long r scr ws: M3 x 6

3Cam ra mounting scr w

hol : 1/4"-20 UNC

1232

L53H /US2 (VCC-598 ) GB 2003, 1, 7

English 5

PARTS NAMES

9L ns iris output conn ctor (LENS)

This -pin connector is used to send the DC control signal and power supply to an auto-iris type lens.

FCam ra s tup s ction (und r th cov r)

These settings are for when using a 1/3 inch CS mount DC (without EE internal amplifier) type lens. However,

if due to installation conditions or environment the settings may need to be modified for best results (see

"SETTINGS"). To access the controls, remove the cover fixing screw, then remove the cover.

NOTE: When using a 1/2 or 2/3 inch C mount VIDEO (with EE internal amplifier) auto-iris type lens, set the

A.I. LENS switch to the VIDEO position.

L53H /US2 (VCC-598 ) GB 2003, 1, 7

6English

CONCERNING AUTO-IRIS LENSES

DC typ auto-iris l ns

A lens without amplifier circuit that operates only on a DC power source. In general, this type of lens is

referred to as DC type coil lens or DC type non-amplifier lens.

(Set the A.I. LENS switch to the DC position.)

VIDEO typ auto-iris l ns

A lens with amplifier circuit that operates on video signal and DC power source. In general, this type of lens is

referred to as EE amplifier type lens.

ALC and LEVEL volume level controls are available on the lens for iris adjustments.

(Set the A.I. LENS switch to the VIDEO position.)

Compatibl auto-iris l ns s

1/3 inch Sanyo DC typ l ns VIDEO typ l ns

VCL-CS8LY: Standard angle, f= 8 mm Standard angle, f= 9 mm

VCL-CS LY: Wide angle, f= mm Telephoto angle, f= 12 mm

VCL-CS2LY: Ultra-wide angle, f= 2.8 mm Greater telephoto angle, f= 16 mm

If using a VIDEO typ auto-iris l ns

•Set the ALC and LEVEL controls on the lens to adjust the iris. Normally the ALC volume should be turned

all the way to Av (Average).

•Depending on the type of lens used, the lens may not perform properly. In such a case, adjust the LEVEL

volume on the lens casing to correct.

DCVIDEOA.I.LENSVR301

L53H /US2 (VCC-598 ) GB 2003, 1, 7

English 7

MOUNTING THE LENS

Plea e u e a DC type auto-iri len ( old eparately).

Ch ck th l ns mount

Do not use a lens if the length “L” is more than 5 mm. That may damage the

camera and prevent proper installation.

1R mov th l ns mount cap from th cam ra.

2Install th auto-iris l ns.

CS mount typ l ns

Carefully align the lens mount with the camera opening, then turn the lens slowly to install it.

C mount typ l ns

To allow for flange-back adjustment, install the C-mount adaptor (option) on the lens mount, then carefully

align the lens mount with the camera opening and turn the lens slowly to install it.

3Conn ct th l ns plug to th l ns iris output conn ctor (LENS) on th sid of th cam ra.

When using lenses from other makers, the plug shape may not correspond to the terminal on the camera.

In such a case, remove the original plug and using a soldering iron, connect the supplied l ns iris plug

according to the diagram. (Refer to page 9.)

Cmounttypelens122

3CSmount

typelens

L53H /US2 (VCC-598 ) GB 2003, 1, 7

8English

MOUNTING THE LENS

Rewiring the len cable in the len iri plug

1Pr par th l ns cabl .

Cut the cable at the plug, then remove approx. 8 mm of the cable sheath and strip about 2 mm from each wire.

2Install th l ns iris plug.

Solder the cable to the pins following the correct pin layout (refer to the table and illustrations), then close

the plug cover.

Pin layout

DC typ l ns s VIDEO typ l ns s

1Brake coil (–) +12 V DC (50 mA max.)

2Brake coil (+) Not used

3Drive coil (+) Video output (1.0 Vp-p, high impedance)

4Drive coil (–) Ground (for video signal and DC power)

Flange-back adju tment

If the pick-up surface is not correctly positioned with relation to the lens focal point, the picture will be out of

focus (in particular when using auto-iris power zoom lenses, sold separately). If that is the case, adjust the

flange-back position as described below.

1Using a + screwdriver, loosen the FLANGE BACK LOCK screw (M2:+).

2Set the zoom lens to the maximum telephoto position, set the focus using the focus ring on the lens.

3Set the zoom lens to the maximum wide angle position, set the focus using the FLANGE BACK ADJ. screw.

4Repeat steps 2 and 3, until the image stays in focus when changing from a telephoto shot to a wide angle shot.

When the setting is complete, tighten the FLANGE BACK LOCK screw.

2,3 14

LOCK

ADJ.

L53H /US2 (VCC-598 ) GB 2003, 1, 7

English 9

Inhaltsverzeichnis

Andere Sanyo Sicherheitskamera Handbücher

Sanyo

Sanyo VCC-XZ200 - 1/4" CCD Weatherproof Day/Night Zoom... Bedienungsanleitung

Sanyo

Sanyo VCC-9500P Bedienungsanleitung

Sanyo

Sanyo VCC-P7575PA Pan-Focus Bedienungsanleitung

Sanyo

Sanyo VDC-HD3100 - Full HD 1080p Vandal Dome... Bedienungsanleitung

Sanyo

Sanyo VSE-6300 SERIES Bedienungsanleitung

Sanyo

Sanyo VDC-HD3500 - Full HD 1080p Vandal Dome... Bedienungsanleitung

Sanyo

Sanyo VDC-DP7584S - 1/4" Color CCD Vandal-Resistant Dome... Bedienungsanleitung

Sanyo

Sanyo VCC-9624 Bedienungsanleitung

Sanyo

Sanyo VDC-DP7584 - 1/4" Color CCD Vandal-Resistant Dome... Bedienungsanleitung

Sanyo

Sanyo VDC-DP7585P Bedienungsanleitung

Sanyo

Sanyo VCC-WD8874 - Wide Dynamic Range Color Bedienungsanleitung

Sanyo

Sanyo VDC-D1185VP Bedienungsanleitung

Sanyo

Sanyo VCC-WD8574 Bedienungsanleitung

Sanyo

Sanyo VDC-D1785IRVP Bedienungsanleitung

Sanyo

Sanyo VCC-3972P Bedienungsanleitung

Sanyo

Sanyo VCB-9324 Bedienungsanleitung

Sanyo

Sanyo VCC-WB4000 Bedienungsanleitung

Sanyo

Sanyo VCC-9684VA - 1/4" Color CCD Indoor Mini Dome... Bedienungsanleitung

Sanyo

Sanyo VCB-3312P Bedienungsanleitung

Sanyo

Sanyo VCC-WD8874 - Wide Dynamic Range Color Bedienungsanleitung

Sanyo

Sanyo VCC-HD4000P Bedienungsanleitung

Sanyo

Sanyo VCC-6592P Bedienungsanleitung

Sanyo

Sanyo VCB-3524 Bedienungsanleitung

Sanyo

Sanyo VCC-4110P Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung