Sanyo VCC-6580 Bedienungsanleitung

INSTRUCTION MANUAL

BEDIENUNGSANLEITUNG

MANUEL D’INSTRUCTIONS

VCC-6580P

COLOUR CCD camera

CCD-Farbkamera

Caméra CCD COULEUR

CCD

About this manual

Before installing and using the camera, please read this manual

carefully. Be sure to keep it handy for later reference.

Über diese Bedienungsanleitung

Lesen Sie bitte vor der Montage und dem Inbetriebnehmen der

Kamera zuerst diese Bedienungsanleitung sorgfältig durch und

bewahren Sie sie zum späteren Nachschlagen auf.

A propos de ce manuel

Avant d’installer et d’utiliser la caméra, veuillez lire ce

manuel attentivement. Gardez-le à portée de main pour

toute référence ultérieure.

Depending on the conditions of use, installation and environment,

please be sure to make the appropriate settings and adjustments. If you

need help with installation and/or settings, please consult your dealer.

CONTENTS

PRECAUTIONS....................................................................................... 2

PARTS NAMES....................................................................................... 3

MOUNTING THE LENS.......................................................................... 5

CONNECTIONS ...................................................................................... 7

SETTINGS............................................................................................... 8

TROUBLESHOOTING.............................................................................12

SPECIFICATIONS....................................................................................13

DIMENSIONS

FEATURES

•Built-in interline transfer method /3" CCD, approx. 470,000

picture elements

•Equipped with a DSP (Digital Signal Processor) function

•Horizontal resolution, more than 520 TV lines

•Minimum required illumination of 0.5 lx (F .2 lens)

•Backlight compensation: Multi-spot metering (normal and high)

and center-weighted metering

•Low smear, anti-blooming, low lag, no burning and no geometric

distortion using the CCD solid state image device.

•00% solid state components giving excellent immunity to shock

and vibration

•Not subject to interference from magnetic or electrostatic fields

•Power supply: 220 – 230 V AC operation

1.1

136

128

1/4” – 20 UNC

English 1

PRECAUTIONS

In case of problem

Do not use the camera if smoke or a strange odour comes from the

unit, or if it seems not to function correctly. Disconnect the power

cord immediately, and consult your dealer (or a Sanyo Authorized

Service Centre).

Do not open or modify

Do not open the cabinet, as it may be dangerous and cause damage

to the unit. For internal settings and repairs, consult your dealer (or a

Sanyo Authorized Service Centre).

Do not p t objects inside the nit

Make sure that no metal objects or flammable substance get inside

the camera. If used with a foreign object inside, it could cause a fire,

short-circuits or damages.

If water or a liquid gets inside the camera, disconnect the power cord

immediately, and consult your dealer (or a Sanyo Authorized Service

Centre). Be careful to protect the camera from rain, sea water, etc.

Be caref l when handling the nit

To prevent damages, do not drop the camera or subject it to strong

shock or vibration.

Install away from electric or magnetic fields

If installed close to a TV, radio transmitter, magnet, electric motor,

transformer, audio speakers the magnetic field they generate will

distort the image.

Protect from h midity and d st

To prevent damages to the camera, do not install it where there is

greasy smoke or steam, where the dampness may get too high, or

where there is a lot of dust.

Protect from high temperat res

Do not install close to stoves, or other heat generating devices, such

as spotlights, etc., or where it could be subject to direct sunlight, as

that could cause deformation, discoloration or other damages.

Be careful when installing close to the ceiling, in a kitchen or boiler

room, as the temperature may raise to high levels.

Install where the temperature range will stay between – 0° C and

50°C. (no condensation)

Cleaning

•Dirt can be removed from the cabinet by wiping it with a soft

cloth. To remove stains, wipe with a soft cloth moistened with a

soft detergent solution and wrung dry, then wipe dry with dry soft

cloth.

•Do not use benzine, thinner or other chemical product on the

cabinet, as that may cause deformation and paint peeling.

Before using a chemical cloth, make sure to read all

accompanying instructions. Make sure that no plastic or rubber

material comes in contact with the cabinet for a long period of

time, as that may cause damage or paint peeling.

ENGLISH

2 English

PARTS NAMES

1Power indicator (POWER)

Comes on when the power to the camera is on.

2Video o tp t connector (VIDEO OUT: BNC type)

Connect this connector to a device such as a monitor, digital video recorder or time-lapse VCR with a VIDEO

IN connector.

3AC power cord

4Line phase adj stment vol me (LINE PHASE)

When using two cameras or more, the image on the monitor may roll vertically when switching sources. This

rolling can be minimized by turning this volume.

5Lens iris o tp t connector (LENS)

This 4-pin connector is used to send the DC control signal and power supply to an auto-iris type lens.

6Camera set p section ( nder the cover)

To access the controls, remove the cover fixing screw, then remove the cover.

English 3

PARTS NAMES

7Lens mo nt cap

The cap is installed to protect the lens mount section.

Remove the lens mount cap before installing a lens (sold separately).

8Flange-back adj stment screw (FLANGE BACK ADJ.)

9Flange-back lock screw (FLANGE BACK LOCK)

FCamera installation bracket

The bracket can be fixed at the top or bottom of the camera. When fixing the bracket, be sure to use the

longer screws and install the shorter screws on the opposite side to seal the openings.

CAUTION:

When installing the camera s pport, select a location that can s pport the total weight of the

camera and accessories.

1Shorter screws: M3 x 4

2Longer screws: M3 x 6

3Camera mo nting screw

hole: 1/4"-20 UNC

789

122

4 English

MOUNTING THE LENS

Please use a DC ype au o-iris lens (sold separa ely).

Check the lens mo nt

Do not use a lens if the length “L” is more than 5 mm. That may damage the

camera and prevent proper installation.

1Remove the lens mo nt cap from the camera.

2Install the a to-iris lens.

CS mo nt type lens

Carefully align the lens mount with the camera opening, then turn the lens slowly to install it.

C mo nt type lens

To allow for flange-back adjustment, install the C-mount adaptor (option) on the lens mount, then carefully

align the lens mount with the camera opening and turn the lens slowly to install it.

3Connect the lens pl g to the lens iris o tp t connector (LENS) on the side of the camera.

Depending on the type of lens, the shape of the lens plug may differ. In this case, consult your dealer or an

Authorized Sanyo Service Center.

C mount type lens

CS mount

type lens

English 5

MOUNTING THE LENS

LENS erminal

Lens iris output terminal which is used to connect the lens plug when the auto-iris lens is attached.

1 Brake coil (–) 3 Drive coil (+)

2 Brake coil (+) 4 Drive coil (–)

Flange-back adjus men

This normally does not need adjustment. If the picture is out of focus at the telephoto position, adjust the

flange-back position as described below.

1Loosen the FLANGE BACK LOCK screw.

2Set to the maxim m telephoto position and foc s the pict re sing the foc s ring.

3Set to the maxim m wide-angle position and foc s the pict re sing the FLANGE BACK ADJ.

screw.

Repeat steps 2 and 3 if the image does not stay in foc s when changing from a wide-angle shot to

a telephoto shot.

4When the setting is complete, tighten the FLANGE BACK LOCK screw.

LOCK

ADJ.

6 English

CONNECTIONS

Basic connec ion for moni oring or recording

The peripheral devices (monitor, digital video recorder,

time-lapse VCR, etc.) and cables are sold separately.

1Make the video signal connection between the camera and

the monitor or time lapse VCR.

2Insert the pl g of this power cord into a wall o tlet.

The POWER indicator (A) will light. Adjust the picture on the

monitor using the Brightness and Contrast controls etc.

Coaxial cable type and maxim m length

•Cable type RG-59U (3C-2V), 250 m maximum.

•Cable type RG-6U (5C-2V), 500 m maximum.

•Cable type RG- U (7C-2V), 600 m maximum.

CAUTION:

•The RG-59U type cable should not be run through electrical

conduits or through the air.

•Using CCTV/Video-grade coaxial cable.

(Video signal connections)

: VIDEO IN

: VIDEO OUT

(A)

English 7

SETTINGS

The illustration shows the factory default settings for the switches in the camera setup section.

Control name Position

1High speed electronic sh tter setting (ES) 1/50 sec.

Iris f nction setting (IRIS)

Electronic iris: EI/A to iris: AI AI

Lens iris level adj stment (LEVEL) adj stable

3Gain control (GAIN)

High: HI/Normal: NOR NOR

4Apert re compensation setting (AP)

Sharp: SHR/Normal: NOR NOR

5Backlight compensation setting (BLC)

M lti: M/Center: C OFF

White balance switch (WB)

A to-Tracing White Balance: ATW/

Man al: MWB

ATW

Colo r (RED or BLUE) adj stment vol me adj stable

7External sync setting (SYNC)

Line-Lock: LL/Internal sync: INT INT

1098765432

MSB

123

EI HI M CSHR MWB

VR302 VR303 VR301

LSB AI NOR NOR M C ATW INT

IRIS SYNC RED BLUE

GAIN BLCAP WB LH

LEVEL

345 7

8 English

SETTINGS

High speed electronic sh tter setting

Normally, the speed setting switches for the high speed electronic

shutter are all set to the down position. This sets the electronic

shutter speed to /50 sec. The switches can be set as indicated in

table A to select one of the 8 speeds available.

CAUTION:

•When using the high speed electronic shutter, the switch 4 must

be set to the down (AI) position.

•Using the high speed electronic shutter indoors with low lighting,

will give darker pictures. In such a case, add some lights to make

sure the lighting is sufficient. If the lighting is very bright, pay

attention to the light angle in order to avoid or minimize the

smear phenomenon effect.

Table A (switch 1 ~ 3)

/50

/ 20

/250

/500

/ 000

/2000

/4000

/ 0000

(Unit: sec.)

Iris f nction setting

Change iris setting when using either lens below.

EI: (for indoor use)

When using a manual or fixed iris lens and the

electronic iris function is on.

•Set the lens aperture to the shortest F stop.

AI: When using an auto-iris lens.

If the entire image is too dark or too bright, adjust

the contrast using the LEVEL dial.

•L (Counterclockwise):

Closes the lens iris, making the entire image darker.

•H (Clockwise):

Opens the lens iris, making the entire image brighter.

NOTE on EI setting:

•If fluorescent lighting is used where the camera is installed, the

object will flicker as a result. This type of phenomenon can be

avoided by replacing the fluorescent lighting with incandescent

lamps.

•If the light entering the lens exceeds the maximum required

illumination, the image cannot be displayed properly. In that case,

manually adjust the lens iris.

123 23123

123

1123 23

123

VR301

LEVEL

English 9

Inhaltsverzeichnis

Andere Sanyo Sicherheitskamera Handbücher

Sanyo

Sanyo VCC-5972P Bedienungsanleitung

Sanyo

Sanyo VCC-HD5600 - Full HD 1080p Day/Night Pan-Tilt-Zoom... Bedienungsanleitung

Sanyo

Sanyo VCb-3100P Bedienungsanleitung

Sanyo

Sanyo VCB-9312P Bedienungsanleitung

Sanyo

Sanyo VCC-6572P Bedienungsanleitung

Sanyo

Sanyo VDC-HD3100 - Full HD 1080p Vandal Dome... Bedienungsanleitung

Sanyo

Sanyo VCC-ZM300 Bedienungsanleitung

Sanyo

Sanyo VCC-9615P Bedienungsanleitung

Sanyo

Sanyo VCC-6594E - 1/3" CCD DSP High Sensitivity Color... Bedienungsanleitung

Sanyo

Sanyo VCC-XZN600P Bedienungsanleitung

Sanyo

Sanyo VDC-HD3300 - Full HD 1080p Vandal Dome... Bedienungsanleitung

Sanyo

Sanyo VCC-6695P Bedienungsanleitung

Sanyo

Sanyo VCC-6584E - 1/3" Color CCD DSP High-Resolution... Bedienungsanleitung

Sanyo

Sanyo VCB-3444 Bedienungsanleitung

Sanyo

Sanyo VCC-XZ200 - 1/4" CCD Weatherproof Day/Night Zoom... Bedienungsanleitung

Sanyo

Sanyo VCB-3574IRP Bedienungsanleitung

Sanyo

Sanyo VCC-P7574 - 1/4" Color CCD Indoor Mini Dome... Bedienungsanleitung

Sanyo

Sanyo VDC-D2185VP Bedienungsanleitung

Sanyo

Sanyo VCB-3442P Bedienungsanleitung

Sanyo

Sanyo VCC-6585P Bedienungsanleitung

Sanyo

Sanyo Colour CCD Camera VCC-5775P Bedienungsanleitung

Sanyo

Sanyo VPC-MZ1E Bedienungsanleitung

Sanyo

Sanyo VCC-5974 Bedienungsanleitung

Sanyo

Sanyo VDC-D1185VP Bedienungsanleitung

Beliebte Sicherheitskamera Handbücher anderer Marken

Okina USA

Okina USA SIR36-870VF650LP Bedienungsanleitung

Divio

Divio NDR155PA Bedienungsanleitung

Canon

Canon VB-C500D Bedienungsanleitung

Easy Access

Easy Access EasyGuard Bedienungsanleitung

Vivotek

Vivotek FD9389-EHV-v2 Bedienungsanleitung

TUYA

TUYA COSMO W2 Bedienungsanleitung

Eusso

Eusso UNC7500-IR Einrichtungshandbuch

urmet domus

urmet domus 1096/204 Bedienungsanleitung

VC VC20 series Bedienungsanleitung

Axis

Axis Q1614 Bedienungsanleitung

ieGeek

ieGeek DD201 Bedienungsanleitung

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Bedienungsanleitung

Vicon

Vicon V662-D-1 Betriebsanleitung

Grundig

Grundig GCH-K0274P Bedienungsanleitung

Lorex

Lorex VANTAGE LBC7032 Bedienungsanleitung

4xem

4xem WPT Bedienungsanleitung

Samsung

Samsung SCV-3082 Bedienungsanleitung

Vitek

Vitek VTC-C544 Bedienungsanleitung