Sanyo SC 90 Series Bedienungsanleitung

INSTRUCTION

MANUAL

SC 90 SERIES

VACUUM CLEANER

SPECIFICATIONS

MODEL POWER LED POWER

LEVEL MITE BEDDING FRAGRANCE FLOOR

NUMBER CONTROL INDICATOR HUNTER TOOL TOOL

WITH

INCENSE TURBINE

SC T93 YES YES YES YES METAL &

PERFUME BRUSH

BOTTLE

SC 92 YES CARTRIDGE FLOOR

——ONLY NOZZLE

SC 92S YES CARTRIDGE FLOOR

——ONLY NOZZLE

Sc 91 SUCTION YES YES CARTRIDGE FLOOR

CONTROL —ONLY NOZZLE

SUCTION CARTRIDGE FLOOR

Sc 90 CONTROL ——ONLY NOZZLE

. . . . . . . . . . . . . . . . . . . ... . .

IMPORTANT SAFETY INSTRUCTIONS

When using an electrical appliance, basic precautions should always be

followed, including the following:

READ ALL INSTRUCTIONS

BEFORE USING THIS APPLIANCE

WARNING

To reduce the risk of fire, electric shock, or injury:

Do not leave appliance when plugged in. Unplug from outlet when not

in use and before servicing.

Do not use outdoors or on wet surfaces.

Do not allow to be used as a toy. Close attention is necessary when

used by or near children,

Use only as described in this manual. Use only manufacturer’s recom-

mended attachments.

Do not use with damaged cord or plug. If appliance is not working as it

should, has been dropped, damaged, left outdoors, or dropped into

water, return it to aservice center.

Do not pull or carry by cord, use cord as a handle, close adoor on cord,

or pull cord around sharp edges or corners. Do not run appliance over

cord. Keep cord away from heated surfaces,

Do not unplug by pulling on cord. To unplug, grasp the plug, not the

cord,

Do not handle plug or appliance with wet hands.

Do not put any object into openings. Do not use with any opening

blocked; keep free of dust, lint, hair, and anything that may reduce air

flow.

Keep hair, loose clothing, fingers, and all parts of body away from

openings and moving parts,

Do not pick up anything that is burning or smoking, such as cigarettes,

matches, or hot ashes.

Do not use without paper bag/or filters in place.

Turn off all controls before unplugging.

Use extra care when cleaning on stairs.

Do not use to pick up flammable or combustible liquids such as gasoline

or use in areas where they may be present,

UnplugMore conrwlng any hw attwhment wxwmry,

Hold plug when rewinding onto cord reel, Do not allow plug to whip

when rewinding.

Avoid using in avertical position.

SAVE THESE INSTRUCTIONS

CAUTION (For Special area only)

If the supply cord of this appliance is damaged, it must only be replaced by a

repair shop appointed by the manufacturer, because aspecial purpose tool is

required.

–l–

-’>

NAME OF PARTS (Assembleas indicated in the center illustration.)

Suction control

(Hold By Friction Type)

Wands

Floor nozzle

Wand

Hose

(Lock With Positive

Power control

Handle grip

/holder I

\Wands

.------ --- .-,

Click Type)

w%;hy~;m

compartment

Turbinelbrush w

How to detach the hose

To detach, pressing the

hose stopper, pull the hose

toward you. \

Hose

stopper

OTHERATTACHMENTS

Bedding tool

I II I C6rd rewind pedal

Hahdle JI!lustindicator

Iidingshutter

SLction inlet

Dusting brush

Fragrance cartridge

Upholstery brush Crevice tool Incense metal Perfume bottle

m- I

OPERATION

1. Cord

Pull out the cord and plug it in the Rewinding

power outlet. To retract the cord back into the

(Caution) vacuum cleaner, press the cord

Do not pull out the cord from the wind pedal.

vacuum cleaner beyond the red \

re-

marker line.

Cord rewin

2. Switch

(Power Control Type)

To start cleaner, first turn on the masterswitch, then turn on the power control.

TCIstop cleaner momentarily, turn off power control. When vacuumingisfinished,

turn off Dowercontrol andthe masterswitch.

Power control

Ma&ter switch \\

(Master Switch Only Type)

Step on master switch for starting or stopping the vacuum cleaner.

Power control 3.

AdjuIt power cmrrtrcdm“MAX’;

wctiort pew(?rbwXmwsrnwimwm

LED Power level indicator -

Suction control

Suction power getswaek when open.

ed. Normally usein closedcondition.

LED lights to indicate the suction

HIGH F.3wER

,O,., oo -

power level. ,,0

MIN ,.,’

POWER CCUTFIOL

OPERATION

5. Turbine brush 5. Floor nozzle

The two-way turbine brush has aThe two-way floor nozzle has alever

lever with two positions. with two positions.

(Caution) FLOOR: For vacuuming wooden

Do not clean bare floors with lever floors, linoleum or plastic

position “RUG”. covered floors.

This might damage the floor. RUG: -For” vacuuming rugs and

carpets.

,UG,D,A

FLOOR

FLOOR-RUG

il ILever

,’

L/Ill ‘--

Dust indicator

The dust indicator shows when the paper bag or cloth bag is full. When the dust

indicator has turned from green to red, empty the bag.

(When checking the dust)

●

Set the power control to “MAX”.

Closa the suction control.

Lift the turbine brush or floor nozzle off the floor.

Remove the crevice tool. n/

DUST INDICATOR

Handy attachmen~ compartment

The compartment stores adusting brush, upholstery brush, crevice tooi and fra~

graneecartridge, aquick salectionfor ali your cleaning needs. Depressthe “PUSH”

mark to open the tool cover.

–3– –4–

ATTACHMENT USE HOW TO ENJOY FRAGRANf?F

ATTACHMENT Furniture Drapes stairs

Dusting

brush –,-.. x x

Upholstery

brush &x x x

Floor -

nozzle ‘

THERMAL SAFETY DEVICE

LEI

3are

Ioors

—

ING Al

arpeted

floors

:EA

Blanket Betweer

cushion

lugsWalls

Built in thermal safety device protects the cleaner motor from overheating. If the

cleaner hose or air intake clogs up with dust, or if the paper bag or cloth bag becomes

full and continues to run the cleaner, the cleaner will shut off automatically to prevent

the motor from overheating. If this happens, disconnect the plug from power outlet,

remove the clogged material or change paper bag or empty cloth bag and let the cleaner

cool down. Approximately one hour after, you can restart your cleaner, If the cleaner

will not start, please consult aSanyo Service Center.

If you prefer afragrance while cleaning, follow the steps below.

1. Push the “PUSH” mark to open the 2. Pull out the fragrance cartridge.

tool cover.

-1 (With Incense Metal And Perfume Bottle Type)

3. Take out the incense metal and Pour two or three drops of perfume

perfume bottle. on the incense metal and allow then

Then twist the cap of the perfume to soak In. After that Insert them

bottle and pull to open, back in the fragrance cartridge.

Twist. <‘Utl”

Perfume bottle

mIncense metal

4, Closethe cover, 5, Insert the fragrance cartridge into the

hahdy attachment compartment and

close the cover.

–5– –6–

DEl

HOW TO USE THE “Mite Hunter”

●

Construction and Method of Extermination

The “Mite Hunter” exterminates mites in two steps. First, mites are vacuumed into

adisposable paper bag or cloth bag. Then they are exterminated inside the filter at

temperatures of 50°C or higher by exhaust fumes circulated from the motor. (Mites

cannot survive at temperatures above approx. 50”C)

Operation

1. Shut the sliding shutter.

If “Mite Hunter” button was Sliding shutter

pushed before you shut the slid.

ing shutter, “Mite Hunter” func.

tion will start automatically when

you shut the sliding shutter.

ZPush the “Mite Hunter” button, Light the Mite sign.

Start “Mite Hunter” operation.

Mite hunter

A%tton e

3. “Mite Hunter” operation.

The motor will circulate the hot exhaust fumes inside the filter approx. 2to

8minutes, and then automatically turn off.

(Caution)

.The “Mite Hunter” may become slightly hot during operation, and the dust indi-

cator may turn red. This occurs with normal use and is not acause for concern.

.If ambient temperature is high, immediate after operation of cleaner, “Mite Hunter”

may not function. In this case, try it again after 30 minutes.

–7-

DUST DISPOSAL

Turn the motor off, pull the hose out of the vacuum cleaner and empty out the dirt

as follows:

1. Open the dust compartment cover

by pulling out the clamp button.

Dust compartment

cover

(Cloth Bag Type)

3, Removethe cloth bagfrom the filter

frame and open the fastener of the

cloth bag, then empty out the dirt.

2. Take out the filter frame.

Filter fra

4, Close the fastener of the cloth bag

and set the cloth bag to the filter

frame.

Groo

(Paper Bag Type)

3. Remove the paper bag from the 4. Set the new paper bag to the filter

filter frame and dispose the used frame.

paper bag. \\

(Caution)

Unless the paper bag or cloth bag is correctly mounted, dust compartment cover will

not close for safe use.

–8–

HOW TO USE THE HOSE STAND

The vacuum cleaner with theturbine brush or floor nozzle, wands, and hose can be

stored while still connected.

1. lnsertthe wand holder into thehole of the vacuum cleaner.

Wand holder

Hole

2, Attach thehose clip tothehose clip holder.

Hos~ clip holder 41’IF

—

L- “

Hose clip

holder Hose clip

3. la3ertthe plp@dfthe bbdding fo6itothe convex of thewafidhoider.

(Caution)

dding tool

Convex

Do not move or carry the vacuum cleaner while it is in the storage position, as the hose

or wands may fall out and become damaged.

–9–

Aseverely soiled or clogged filter should be thoroughly washed with fresh tepid water.

Aneutral detergent could be used if required.

1. Washing

2. Drying

Cloth bag (Cloth Bag Type Only)

@io

Remove the filter

water.

(Caution)

and rinse it with

Never insert the cloth bag or filter into

the vacuum cleaner unless it is com-

pletely dry.

.-----

I=.-

Cloth bag

Filter

CARE OF TURBINE BRUSH

Before caring for the turbine brush, be sure to turn OFF the switch of the unit and dis-

connect the plug from the outlet.

if needles, pins or waste paper get stuck in the suction inlet, remove them after going

through the aboveprocedure,

Trying to removethem during operation isdangerous. 4

IMPORTANT (Paper BagType Only)

●Use only genuine Sanyo paper bagsto assurebest results.

.Genuine Sanyo bags are available through your dealer.

(Be sure to state the type number SC-P8)

-lo–

CARE AND MAINTENANCE

If you have aproblem with your vacuum cleaner, consult the handy guide

below. If the vacuum cleaner is malfunctioning, do not operate it. Contact

your dealer or the nearest Sanyo Service Cent~r. “

Problem Possible cause Possible solution

(1) Cleaner won’t 1. Not firmly plugged in. 1. Plug unit in firmly.

run. 2. No voltage in wall outlet. 2. Check fuse or breaker.

3. Thermal safety device 3. Refer to page 5“Thermal

operated. safety device”.

Approximately one hour

later, you can restart the

cleaner.

(2) The dust indi- 1. Paper bag or cloth bag 1. Change throw away paper

cater moves full. bag or cleaning cloth

immediately to bag.

the red zone. 2. Filter dirty. ‘2. Clean out the filter.

(3) Cord doesn’t 1. Cord twisted or uneven. 1. Pull out cord and rewind.

fully rewind.

SANYO Electric Co., Ltd.

OSAKA, JAPAN

9BF-6-Pill-00521 @ @ Printed in Japan

Inhaltsverzeichnis

Andere Sanyo Staubsauger Handbücher

Sanyo

Sanyo SC-B1211 Bedienungsanleitung

Sanyo

Sanyo SC-X1000P Bedienungsanleitung

Sanyo

Sanyo SC 53 series Bedienungsanleitung

Sanyo

Sanyo SC-296T Bedienungsanleitung

Sanyo

Sanyo SC-32 Bedienungsanleitung

Sanyo

Sanyo SC-N525T Bedienungsanleitung

Sanyo

Sanyo SC-35A Bedienungsanleitung

Sanyo

Sanyo SC-C1250 Bedienungsanleitung

Sanyo

Sanyo SC-A114 Bedienungsanleitung

Sanyo

Sanyo SC 25 Bedienungsanleitung

Sanyo

Sanyo SC204C Bedienungsanleitung

Sanyo

Sanyo SC-WP110 Bedienungsanleitung

Sanyo

Sanyo Think Gaia SC-L180H Bedienungsanleitung

Sanyo

Sanyo SC-WP1000 Bedienungsanleitung

Sanyo

Sanyo SC-X1000P Bedienungsanleitung

Sanyo

Sanyo SC-X1000P Bedienungsanleitung

Sanyo

Sanyo SC 53 series Bedienungsanleitung

Sanyo

Sanyo SC-K140T Bedienungsanleitung

Sanyo

Sanyo SC-S700P - Powerhead Canister Vacuum Cleaner Bedienungsanleitung

Sanyo

Sanyo SC-F1201 - Upright Bagless Vacuum Cleaner Bedienungsanleitung

Sanyo

Sanyo SC-30L Bedienungsanleitung

Sanyo

Sanyo SC 820 Bedienungsanleitung

Sanyo

Sanyo PowerBoy SC-Y130 Bedienungsanleitung

Sanyo

Sanyo SC-JS2B Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

Exido

Exido 240-114 Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung