Schwinn 213 Bedienungsanleitung

213 Schwinn® Recumbent Exercise Bike

Parts List

Full Size Hardware Chart

Product Illustration

Assembly Instructions

FITNESS SAFEGUARDS AND WARNINGS

Before starting any exercise program, consult with your physician or health

professional. He or she can help establish the correct exercise frequency,

intensity (target heart rate zone) and time appropriate for your particular age and

condition.

The following 3 warnings listed below are also located on the computer console

mast of the exercise bike. Failure to follow any of these safeguards may result in

injury or serious health problems.

•Read and understand the Owner’s Manual and operation instructions prior

to use. If you do not have an Owner’s Manual, call 1-800-864-1270 to

obtain one.

•If you feel any unusual pain or tightness in your chest, shortness of breath

or dizziness, feel faint or have any discomfort while you exercise, STOP!

Consult your physician.

•Keep children and pets away.

Other Important Safeguards and Warnings

•Do not exceed maximum user weight of 136 kg (300 lb.)

•It is the responsibility of the owner to ensure that all users of this

equipment are adequately informed of all precautions.

•Use this equipment only on a solid level surface. Cover the floor or carpet

beneath this equipment for protection.

•Read the Warning Label located on the computer console mast.

•Do not place fingers or any other objects into moving parts of the exercise

equipment.

•This equipment is designed for use by persons aged 13 years and older.

Teenagers should be supervised.

•Always wear athletic shoes for foot protection. Avoid wearing loose

clothing that may become entangled in the drive mechanism.

•Warn bystanders to keep a safe distance, especially from the moving

pedals. Do not allow anyone to touch the bike while it is in operation.

•This equipment is for home use only. Do not use in a commercial,

institutional, or rental setting.

•Care should be taken when mounting or dismounting the exercise bicycle.

•Do not operate in damp or wet conditions.

•Follow proper set-up and guidance as outlined in the Owner’s Manual and

Assembly Instructions. Only use the bike as outlined in usage instructions

of the Owner’s Manual.

•Prior to each use inspect the bike for loose, broken, or worn parts. Do not

use if found in this condition. The safety of the equipment can only be

ensured if it is regularly examined and maintained. (See Maintenance

section of the Owner’s Manual)

•Refer to the Maintenance section in the Owner’s Manual and disconnect

power supply before servicing the bike.

•Replace Warning Label if damaged, illegible, or removed.

•We recommend that a minimum distance of 1 meter (39 inches)

surrounding the bike is kept clear of all obstructions, including children,

bystanders, and pets. This is to ensure adequate clearance for easy

access to the bike and to avoid any possible contact with the moving

pedals

213 Schwinn Recumbent Bike Parts List,

Hardware Chart, and Assembly Instructions

Assembly of the 213 Recumbent Bike is divided into 5 easy stages; each

comprised of only a few setup steps. Before proceeding with the assembly,

please read over the easy to follow instructions to familiarize yourself with the

process.

• A flat area of 5’ x 7’ is suggested to assemble and properly use the 213

exercise bike.

• You will need the following tools to complete the assembly:

5mm Allen wrench (supplied)

Open wrench 13mm, 14mm, 15mm (supplied)

Phillips screwdriver (supplied)

Also, to ensure quick and easy set up of the 213 Recumbent Bike, please verify

the size and quantity of each of the enclosed assembly hardware. Included is a

handy full size hardware chart and parts list of each of the required assembly

hardware. Simply match up the corresponding hardware to each full size

drawing.

Parts List

Check Quantity Description Reference #

__ 1 Computer 1

__ 1 Handlebars 2

__ 4 Computer Screws 3

__ 1 Handlebar Post 4

__ 19 Allen Bolt 8x1.25x16L 5

__ 4 Wavy Washer 6

__ 1 Upper HR Wire 7

__ 1 Upper Computer Wire 8

__ 1 Lower Computer Wire 9

__ 1 Lower HR Wire 10

__ 1 Front Stabilizer 11

__ 4 Flathead Screw 8x16L 12

__ 1 Main Frame 13

__ 1pr Pedals 14

__ 19 Flat Washer 15

__ 1 Seat Rail Post 16

__ 1 Rear Stabilizer 17

__ 1 Seat Rail 18

__ 1 Seat Rail HR Wire 19

__ 1 Seat Handlebar 21

4 Allen Bolt 8 x 1.25 x45L 22

__ 1 Seat Support Frame 23

__ 1 Seat Backer/ Read Rack 24

__ 5 Allen Bolt 8x1.25x35L 25

__ 1 Seat Adjustment Knob 26

__ 1 Flat Washer 27

__ 1 Seat Back 28

__ 1 Backer Slider Tube 29

__ 1 Seat Adjustment Knob 30

__ 1pr Bottle Holder 31

__ 8 Screw 5x14L 32

__ 1 Seat Bottom 33

__ 1 AC Adaptor 75

Hardware Chart

Flat Washer?10

*?25*2T

Level Knob 3

Stage#5

Screws M8xP1.25

xmm Allen Bolt M8x

P1.25x16mm

Stage#4

Flat Washer

?8*?16*2T

Flat Washer

?8*?16*2T

Screw M5x14L

Allen Bolt

M8xP1.25x16mm

Stage#2

Flat Washer

for ? 8* ? 16* 2T

Stage#3

Stage#1

Screws M8xP1.25x mm

Flat Washer ?8*?16*2T

Stage#11

Allen Bolt M8xP1.25x16mm

Screws M8xP1.25x16mm

Stage#9

Flat Washer

?8*?16*2T

Stage#7

Allen Bolt M8x

P1.25x16mm

Stage#6

Screws M8xP1.25x16mm Allen Key

Screwdriver

Note: Please verify you have all correct parts and quantities before assembling

unit.

If you are missing items, are short quantities, or have damaged components,

please contact Schwinn at 1.800.864.1270.

213 Assembly Drawing with Reference

Numbers

Replacement Parts List

Reference # Description Part #

__ 1 Computer 18142

__ 2 Handlebars 18200

__ 3 Computer Screws 18094

__ 4 Handlebar Post 18196

__ 5 Allen Bolt 8x1.25x16L 18001

__ 6 Wavy Washer 18098

__ 7 Upper HR Wire 18086

__ 8 Upper Computer Wire 18085

__ 9 Lower Computer Wire 18155

__ 10 Lower HR Wire 18064

__ 11 Front Stabilizer 18189

__ 12 Flathead Screw 8x16L 18136

__ 14 Pedals 18048

__ 15 Flat Washer 18101

__ 16 Seat Rail Post 18198

__ 17 Rear Stabilizer 18191

__ 18 Seat Rail 18080

__ 19 Seat Rail HR Wire 18082

__ 21 Seat Handlebar 18208

__ 22 Allen Bolt 8 x 1.25 x45L 18072

__ 23 Seat Support Frame 18194

__ 24 Seat Backer/ Read Rack 18240

__ 25 Allen Bolt 8x1.25x35L 18220

__ 26 Seat Adjustment Knob 18039

__ 27 Flat Washer 18225

__ 28 Seat Back 18248

__ 29 Backer Slider Tube 18195

__ 30 Seat Adjustment Knob 18214

__ 31 Bottle Holder 18250

__ 32 Screw 5x14L 18250

__ 33 Seat Bottom 18246

__ 75 AC Adaptor 18228

Instructions

IMPORTANT!: To ensure ease of assembly please verify the size and

quantity of all the required assembly hardware and parts with the enclosed

parts list and full size hardware chart.

Each step of the assembly process has been broken down into 8 easy-to-follow

stages. Please take just a few moments to read over these instructions to

familiarize yourself with the process to make assembly quick and trouble-free.

Assembly Stage #1

Assemble Handle Bar

Assembly hardware required: (4) M8 Allen Bolts 16 mm long (item #5)

(4) Flat Washer Ø8* Ø 16*2T(item #15)

Step 1: Attach HANDLEBAR ASSEMBLY (#21) to SEAT FRAME (#23) with the 4

ALLEN BOLTS 16mm (#5) and 4 FLAT WASHERS (#15). Tighten bolts with the

provided Allen wrench.

Assembly Stage #2

Assemble Seat, Water Bottle Holder, and Seat Backer

Assembly hardware required: (8) Screws M4x14L (item #32)

(4) M8 Allen Bolts 45 mm long (item #22)

(4) Flat Washer Ø8* Ø 16*2T(item #15)

Step 2: Attach the right and left WATER BOTTLE HOLDERS (#31) with the

SCREWS (#32) to the underside of the SEAT BOTTOM (#33) using the provided

screwdriver.

Step 3: Attach SEAT BOTTOM (#33) to SEAT FRAME (#23) with 4 ALLEN

BOLTS 45mm (#22) and 4 WASHERS (#15). Tighten Bolts.

Assembly Stage #3

Assemble Seat Back and Magazine Rack

Assembly hardware required: (4) M8 Allen Bolts 16 mm long (item #5)

(5) M8 Allen Bolts 35 mm long (item #25)

(4) Flat Washer Ø8* Ø 16*2T(item #15)

(1) Flat Washer Ø25.4 x 2T (item # 27)

Step 4: Attach BACKER SLIDER TUBE (#29) to SEAT FRAME (#23) with 4 ALLEN

BOLTS 16mm (#5) and 4 WASHERS (#15). Tighten bolts.

Step 5: Attach the SEAT BACK (#28) and SEAT BACKER (#24) to the SEAT FRAME

(#23) with 5 Allen Bolts (#25), ADJUSTMENT KNOB (#26), and the FLAT WASHER

(#27). Tighten bolts.

Note: Finished seat should look like picture below:

Inhaltsverzeichnis

Andere Schwinn Heimtrainer Handbücher

Schwinn

Schwinn 150 Upright Bike Bedienungsanleitung

Schwinn

Schwinn 126 Upright Bike Bedienungsanleitung

Schwinn

Schwinn IC Pro Bedienungsanleitung

Schwinn

Schwinn 220 Recumbent Bike 2010 model Bedienungsanleitung

Schwinn

Schwinn 570R Bedienungsanleitung

Schwinn

Schwinn 130 Upright Bike Bedienungsanleitung

Schwinn

Schwinn 101 Upright Bike Bedienungsanleitung

Schwinn

Schwinn 230 Recumbent Bike Bedienungsanleitung

Schwinn

Schwinn Journey 1.0 Bedienungsanleitung

Schwinn

Schwinn 131 Upright Bike Bedienungsanleitung

Schwinn

Schwinn active 10 Series Bedienungsanleitung

Schwinn

Schwinn Fastback Sport 16 Bedienungsanleitung

Schwinn

Schwinn 270 Recumbent Bike Bedienungsanleitung

Schwinn

Schwinn 140 Bedienungsanleitung

Schwinn

Schwinn 201 Recumbent Bike Bedienungsanleitung

Schwinn

Schwinn 190 Bedienungsanleitung

Schwinn

Schwinn EVO Airdyne Bedienungsanleitung

Schwinn

Schwinn NAUTILUS A10 Bedienungsanleitung

Schwinn

Schwinn 226 Recumbent Bike Bedienungsanleitung

Schwinn

Schwinn active 10 Series Bedienungsanleitung

Schwinn

Schwinn Airdyne Backdraft Bedienungsanleitung

Schwinn

Schwinn 245 Bedienungsanleitung

Schwinn

Schwinn SR23 Bedienungsanleitung

Schwinn

Schwinn 270 Recumbent Bike Bedienungsanleitung

Beliebte Heimtrainer Handbücher anderer Marken

TOORX

TOORX BRX85 Bedienungsanleitung

Matrix

Matrix KranKcycle Bedienungsanleitung

Weslo

Weslo Vector 302 Kurzanleitung

Matrix

Matrix IC3 Bedienungsanleitung

Sunny Health & Fitness

Sunny Health & Fitness SF-B121021 Bedienungsanleitung

Monark

Monark 827E Bedienungsanleitung

Stamina

Stamina 1310 Bedienungsanleitung

American Fitness

American Fitness SPR-BK1072A Bedienungsanleitung

Cateye

Cateye CS-1000 (CYCLO SIMULATOR) Bedienungsanleitung

BH FITNESS

BH FITNESS H9158H Bedienerhandbuch

Body Sculpture

Body Sculpture BC-7220G Bedienungsanleitung

Cateye

Cateye EC-2300 Bedienungsanleitung

FYTTER

FYTTER RACER RC MSR Bedienungsanleitung

Kikos

Kikos HM-9090M Bedienungsanleitung

Fuel Fitness

Fuel Fitness SU135-40 Bedienungsanleitung

NordicTrack

NordicTrack Gxr 4.2 Bike Bedienungsanleitung

Vision Fitness

Vision Fitness U70 Bedienungsanleitung

Stamina

Stamina 15-0340A Bedienungsanleitung