Schwinn 222 Bedienungsanleitung
222 Schwinn® Recumbent Exercise Bike
Parts List
Full Size Hardware Chart
Product Illustration
Assembly Instructions
FITNESS SAFEGUARDS AND WARNINGS
Before starting any exercise program, consult with your physician or health
professional. He or she can help establish the correct exercise frequency,
intensity (target heart rate zone) and time appropriate for your particular age and
condition.
The following 3 warnings listed below are also located on the computer console
mast of the exercise bike. Failure to follow any of these safeguards may result in
injury or serious health problems.
•Read and understand the Owner’s Manual and operation instructions prior
to use. If you do not have an Owner’s Manual, call 1-800-864-1270 to
obtain one.
•If you feel any unusual pain or tightness in your chest, shortness of breath
or dizziness, feel faint or have any discomfort while you exercise, STOP!
Consult your physician.
•Keep children and pets away.
Other Important Safeguards and Warnings
•Do not exceed maximum user weight of 136 kg (300 lb.)
•It is the responsibility of the owner to ensure that all users of this
equipment are adequately informed of all precautions.
•Use this equipment only on a solid level surface. Cover the floor or carpet
beneath this equipment for protection.
•Read the Warning Label located on the computer console mast.
•Do not place fingers or any other objects into moving parts of the exercise
equipment.
•This equipment is designed for use by persons aged 13 years and older.
Teenagers should be supervised.
•Always wear athletic shoes for foot protection. Avoid wearing loose
clothing that may become entangled in the drive mechanism.
•Warn bystanders to keep a safe distance, especially from the moving
pedals. Do not allow anyone to touch the bike while it is in operation.
•This equipment is for home use only. Do not use in a commercial,
institutional, or rental setting.
•Care should be taken when mounting or dismounting the exercise bicycle.
•Do not operate in damp or wet conditions.
•Follow proper set-up and guidance as outlined in the Owner’s Manual and
Assembly Instructions. Only use the bike as outlined in usage instructions
of the Owner’s Manual.
•Prior to each use inspect the bike for loose, broken, or worn parts. Do not
use if found in this condition. The safety of the equipment can only be
ensured if it is regularly examined and maintained. (See Maintenance
section of the Owner’s Manual)
•Refer to the Maintenance section in the Owner’s Manual and disconnect
power supply before servicing the bike.
•Replace Warning Label if damaged, illegible, or removed.
•We recommend that a minimum distance of 1 meter (39 inches)
surrounding the bike is kept clear of all obstructions, including children,
bystanders, and pets. This is to ensure adequate clearance for easy
access to the bike and to avoid any possible contact with the moving
pedals
222 Schwinn Recumbent Bike Parts List,
Hardware Chart, and Assembly Instructions
Assembly of the 222 Recumbent Bike is divided into 5 easy stages; each
comprised of only a few setup steps. Before proceeding with the assembly,
please read over the easy to follow instructions to familiarize yourself with the
process.
• A flat area of 5’ x 7’ is suggested to assemble and properly use the 222
exercise bike.
• You will need the following tools to complete the assembly:
5mm Allen wrench (supplied)
Open wrench 13mm, 14mm, 15mm (supplied)
Phillips screwdriver (supplied)
Also, to ensure quick and easy set up of the 222 Recumbent Bike, please verify
the size and quantity of each of the enclosed assembly hardware. Included is a
handy full size hardware chart and parts list of each of the required assembly
hardware. Simply match up the corresponding hardware to each full size
drawing.
Parts List
Check Quantity Description Reference #
__ 1 Computer 1
__ 1 Handlebars 2
__ 4 Computer Screws 3
__ 1 Handlebar Post 4
__ 15 Allen Bolt 8x1.25x16L 5
__ 4 Wavy Washer 6
__ 1 Upper HR Wire 7
__ 1 Upper Computer Wire 8
__ 1 Lower Computer Wire 9
__ 1 Lower HR Wire 10
__ 1 Front Stabilizer 11
__ 4 Flathead Screw 8x16L 12
__ 1 Main Frame 13
__ 1pr Pedals 14
__ 19 Flat Washer 15
__ 1 Seat Rail Post 16
__ 1 Rear Stabilizer 17
__ 1 Seat Rail 18
__ 1 Seat Rail HR Wire 19
__ 1 Seat Handlebar 20
__ 1 Seat Adjustment Knob 21
__ 1 Small Flat Washer 22
__ 1 Seat Bottom 23
__ 8 Allen Bolt 8x1.25x45L 25
__ 1 Seat Support Frame 26
__ 1 Seat Back 27
__ 1pr Bottle Holder 28
__ 8 Screw 5x14L 29
__ 1 AC Adaptor 72
Hardware Chart
Stage#10
Screws M8xP1.25x16mm Flat Washer
?8*?16*2T
Allen Bolt M8xP1.25x16mm
Stage#8
Stage#6
Screws M8xP1.25x16mm Flat Washer
?8*?16*2T
Allen Key
Screwdriver
Stage#5
Allen Bolt M8xP1.25x16mm
Stage#4
Screws M8xP1.25x mm
Flat Washer
?8*?16*2T
Flat Washer
?8*?16*2T Screws M8xP1.25x mm
Stage#2
Screws M5x14L
Flat Washer
?8*?16*2T
Screws M8xP1.25x16mm
Stage#3
Stage#1
Note: Please verify you have all correct parts and quantities before assembling
unit.
If you are missing items, are short quantities, or have damaged components,
please contact Schwinn at 1.800.864.1270.
222 Assembly Drawing with Reference
Numbers
Replacement Parts List
Reference # Description Part #
__ 1 Computer 18165
__ 2 Handlebars 18200
__ 3 Computer Screws 18094
__ 4 Handlebar Post 18197
__ 5 Allen Bolt 8x1.25x16L 18001
__ 6 Wavy Washer 18098
__ 7 Upper HR Wire 18086
__ 8 Upper Computer Wire 18085
__ 10 Lower HR Wire 18064
__ 11 Front Stabilizer 18190
__ 12 Flathead Screw 8x16L 18219
__ 14 Pedals 18255
__ 15 Flat Washer 18101
__ 16 Seat Rail Post 18199
__ 17 Rear Stabilizer 18192
__ 18 Seat Rail 18080
__ 19 Seat Rail HR Wire 18082
__ 20 Seat Handlebar 18207
__ 22 Small Flat Washer 18140
__ 23 Seat Bottom 18246
__ 25 Allen Bolt 8x1.25x45L 18072
__ 26 Seat Support Frame 18254
__ 27 Seat Back 18247
__ 28 Bottle Holder 18250
__ 29 Screw 5x14L 18250
__ 72 AC Adaptor 18007
Instructions
IMPORTANT!: To ensure ease of assembly please verify the size and
quantity of all the required assembly hardware and parts with the enclosed
parts list and full size hardware chart.
Each step of the assembly process has been broken down into 6 easy-to-follow
stages. Please take just a few moments to read over these instructions to
familiarize yourself with the process to make assembly quick and trouble-free.
Assembly Stage #1
Assemble Seat and Handle Bar
Assembly hardware required: (8) M8 Allen Bolts 45 mm long (item #25)
(4) M8 Allen Bolts 16 mm long (item #5)
(12) Flat Washer Ø8* Ø 16*2T(item #15)
(8) Screws M4x14L (item #29)
Step 1: Attach HANDLEBAR ASSEMBLY (#20) to SEAT FRAME (#26) with the 4
ALLEN BOLTS 16mm (#5) and 4 FLAT WASHERS (#15). Tighten bolts with the
provided Allen wrench.
Step 2: Attach the right and left WATER BOTTLE HOLDERS (#28) with the
SCREWS (#29) to the underside of the SEAT BOTTOM (#23) using the provided
screwdriver.
Step 3: Attach SEAT (#23) to SEAT FRAME (#26) with 4 ALLEN BOLTS 45mm
(#25) and 4 WASHERS (#15). Tighten Bolts.
Step 4: Attach SEAT BACK (#27) to SEAT FRAME (#26) with 4 ALLEN BOLTS
45mm (#25) and 4 WASHERS (#15). Tighten Bolts.
Note: Finished seat should look like picture below:
Assembly Stage #2
Attach Rear Stabilizer and Seat Rail to
Seat Assembly
Assembly hardware required: (4) M8 Allen Bolts 16mm (item #5)
(4) Flat Washers Ø8 * Ø16 * 2T (item#15)
(2) Flat Head Screws (item #12)
Step 5: Attach the REAR STABILIZER (#17) to the SEAT RAIL POST (#16) with 2
FLAT HEAD SCREWS (#12). Tighten bolts.
Step 6: Attach SEAT RAIL (#18) to SEAT RAIL POST (#16) with 4 FLAT
WASHERS (#15) and 4 ALLEN BOLTS (#5). Tighten bolts
Step 7: Insert SEAT PIN ADJUSTMENT KNOB (#3) into SEAT FRAME (#8).
Slide the seat assembly from stage 1 onto the SEAT RAIL (#9). Tighten seat
assembly to the rail with the SEAT PIN ADJUSTMENT KNOB (#3). Insert HR
CABLE (#47) into HR input on the back of the seat assembly (inset picture).
Inhaltsverzeichnis
Andere Schwinn Heimtrainer Handbücher
Schwinn
Schwinn 206 Recumbent Bike Bedienungsanleitung
Schwinn
Schwinn 9-7300 A.C. Power Bedienungsanleitung
Schwinn
Schwinn IC ELITE Bedienungsanleitung
Schwinn
Schwinn Schwinn A.C. Classic Bedienungsanleitung
Schwinn
Schwinn Evolution Assembly Bedienungsanleitung
Schwinn
Schwinn Fitness 122 Bedienungsanleitung
Schwinn
Schwinn 10 Series Bedienungsanleitung
Schwinn
Schwinn IC PRO Bike Betriebsanleitung
Schwinn
Schwinn Active series 20 series Bedienungsanleitung
Schwinn
Schwinn IC Pro Bedienungsanleitung
Schwinn
Schwinn 570R Bedienungsanleitung
Schwinn
Schwinn Fitness 101 Bedienungsanleitung
Schwinn
Schwinn 105p Bedienungsanleitung
Schwinn
Schwinn A.C. Sport Bedienungsanleitung
Schwinn
Schwinn Fitness 231 Bedienungsanleitung
Schwinn
Schwinn Airdyne Bedienungsanleitung
Schwinn
Schwinn 270i Recumbent Bike Bedienungsanleitung
Schwinn
Schwinn AD4 Airdyne Bedienungsanleitung
Schwinn
Schwinn 202 Recumbent Bike Bedienungsanleitung
Schwinn
Schwinn A.C. Performance Bedienungsanleitung
Beliebte Heimtrainer Handbücher anderer Marken
Stamina
Stamina 1310 Bedienungsanleitung
American Fitness
American Fitness SPR-BK1072A Bedienungsanleitung
Cateye
Cateye CS-1000 (CYCLO SIMULATOR) Bedienungsanleitung
BH FITNESS
BH FITNESS H9158H Bedienerhandbuch
Body Sculpture
Body Sculpture BC-7220G Bedienungsanleitung
Cateye
Cateye EC-2300 Bedienungsanleitung
