Sea-doo Spark Betriebsanleitung

Polytec Surface

Care and Repair

Hull and Deck

Technical Service Procedures

IMPORTANT

BRP strongly recommends providing a copy of this

document to your local body shop before it performs

any repairs on a Polytec hull or deck.

Version Date: September 30, 2019

2 1 9 1 0 1 0 2 9

permission of Bombardier Recreational Products Inc. (BRP)

Printed in Canada

Technical Publications

Bombardier Recreational Products Inc. (BRP)

Valcourt (Quebec) Canada

® ™ Trademarks of Bombardier Recreational Products Inc. (BRP) or its affiliates.

219101029 - Polytec Surface - Care and Repair online booklet en AP

®™ and the BRP logo are trademarks of Bombardier Recreational Products Inc. or its affiliates.

ACE™ GTS™ WAKE™

FISH PRO™ RXT™ X™

GTI™ Sea-Doo® XPS™

GTR™ SPARK™

This document contains the trademarks of the following companies:

3M is a trademark of 3M.

Fabuloso is a trademark of Colgate-Palmolive Company.

Fantastik is a trademark of S.C. Johnson & Son, Inc.

Kleen-Flo is a trademark of Kleen-Flo Tumbler Industries Limited.

WD-40 is a trademark of WD-40 Manufacturing Company.

R-M is a trademark of BASF Corporation.

Meguiar’s Gold Class is a trademark of Meguiar’s Inc.

Table of Contents

OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Aesthetic Damage - Scratches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Structural Damage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Location of Damage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4

HULL AND DECK IDENTIFICATION

IDENTIFICATION CHART . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

CARE AND PRODUCTS

SPECIAL CARE OF POLYTEC SURFACES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Fuel Spillage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Washing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Aggressive Liquids and Solvents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Heat Gun . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

Flame Treatment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Storage Shrink Wrap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

PRODUCTS SAFE FOR USE ON POLYTEC SURFACES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

PRODUCTS TO BE USED WITH CAUTION ON POLYTEC SURFACES. . . . . . . . . . . . . . . . . . . .10

PRODUCTS PROHIBITED FROM USE ON POLYTEC SURFACES . . . . . . . . . . . . . . . . . . . . . . . 11

REPAIR PROCEDURES

QUICK REFERENCE GUIDE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

PLASTIC WELDING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

POLYTEC RESURFACING TECHNIQUE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

THIS PAGE INTENTIONALLY LEFT BLANK

OVERVIEW

The Polytec deck and hull are made of a single

thick skin of polypropylene reinforced with

fiberglass.

Aesthetic Damage - Scratches

An external scratch is the result of the hull or

deck surfaces rubbing against a rough or sharp

object.

This type of damage does not cause any

operational problems. This type of damage is

exclusively aesthetic.

In most cases, this damage can be removed or

diminished by buffing over the scratch using the

Polytec Resurfacing Technique. Refer to REPAIR

PROCEDURES at the end of this document.

The results may vary, depending on the affected

area.

Structural Damage

IMPORTANT

BRP strongly recommends providing a copy

of this document to your local body shop

before it performs any repairs on a

Polytec hull or deck.

Structural damage is usually the result of

impact. The component is cracked or pierced.

The size and location of the damage are

deciding factors when evaluating if the

component should be repaired. For example,

repairing a large area of complex damage under

the engine might require as much labor as a

hull replacement. An estimate of the labor cost

should be used to guide the decision.

The decision to repair or replace should be

based on the customer’s expectations regarding

cost, aesthetics, resale value, and how quickly

the job must be completed.

Cracks

This is the most common type of damage after

scratches.

A crack is a fracture which penetrates the

material of a component. The opening is

visible from the inside and the outside of the

component.

Holes

The second type of structural damage is a hole,

usually the result of an impact with an external

object. A piece of the damaged component may

be missing.

A hole can be repaired using the original piece

if it is not bent or damaged. A new piece of

Polytec material, cut to size, can also be used.

NOTICE

Failure to follow the recommendations presented

in this bulletin may result in a poor quality repair

or damage to the Polytec surface.

Location of Damage

Certain areas of the hull are critically sensitive to dimensional precision and should not be repaired by

plastic welding.

It is not recommended to repair structural damage at the bow and transom tow hooks as well as in the

following areas:

Ribbing

Pump support and ride plate mating surfaces

Intake grate mating surface

Keel line

HULL AND DECK

IDENTIFICATION

IDENTIFICATION CHART

YEAR MODEL MODEL MODEL HULL DECK

Up to 2016 Spark All Polytec Polytec

2017

GTS 25HC, 25HD Polytec Acrylic/ABS

GTI (900 ACE) 37HC, 37HD

Spark All Polytec Polytec

2018

GTI (900 ACE)

GTI SE (900 ACE)

GTS WAKE 155

All Polytec

Gelcoat (black and white)

Acrylic/ABS (other colors)

Spark All Polytec Polytec

2019 GTS WAKE 155 All Polytec Acrylic/ABS

Spark All Polytec Polytec

2020

GTI Pro

RXP-X All Gelcoat Acrylic/ABS

GTI

WAKE 155

GTI SE

GTR

All Polytec Acrylic/ABS

GTX

RXT

Fish Pro

Wake Pro

All Acrylic/ABS Acrylic/ABS

CARE AND PRODUCTS

SPECIAL CARE OF POLYTEC SURFACES

Fuel Spillage

NOTICE

Wipe up spilled fuel immediately. Failure to

clean fuel spillage may weaken the surface and

cause damage.

Washing

Wash the vehicle with a solution of mild soap or

detergent and lukewarm water.

Use a clean, soft cloth, applying only light

pressure.

Rinse with clean water and dry with a damp

cloth or chamois.

Aggressive Liquids and

Solvents

If a cleaning liquid or organic solvent is used, it

should be removed as soon as possible to avoid

a chemical attack on the surface.

The time required for a chemical attack to occur

can be surprisingly short.

Damage can be minimized and/or eliminated if

no aggressive liquids or solvents are used.

Heat Gun

NOTICE

Do not use a heat gun to perform the following:

– Decal removal

– Carpet replacement

– Pump support removal

– Ride plate removal

If heat is applied to the same area for too long,

the high temperature can damage the surface.

Flame Treatment

Flame treatment:

– Is a quick movement over an area or

component with a blow torch.

– Should never be too intense. The part should

never melt to the point that it looks polished.

– Will burn any excess plastic around a

scratch.

Storage Shrink Wrap

When shrink wrapping a vehicle, several

precautions must be followed to avoid damage

to the finish.

1. Wash the vehicle with a mixture of water and

light detergent.

NOTICE

Do not use a no-rinse, wash-and-shine product

on any acrylic components. This type of product

may contain agents not compatible with the

surface finish, which could lead to acrylic

crazing during storage.

2. Dry the vehicle thoroughly.

3. Install the shrink wrap.

NOTICE

Avoid touching the vehicle surface with the

torch flame during the shrinking process or

heating a particular area for an extended period

of time.

4. Install vents to allow proper ventilation under

the shrink wrap.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Sea-doo Boot Handbücher

Sea-doo

Sea-doo 230 Challenger 2008 Handbuch

Sea-doo

Sea-doo GTS Series Handbuch

Sea-doo

Sea-doo SPARK 2022 Series Handbuch

Sea-doo

Sea-doo GTS Series Handbuch

Sea-doo

Sea-doo SAR 2018 Series Handbuch

Sea-doo

Sea-doo FISHPRO SCOUT 130 2024 Handbuch

Sea-doo

Sea-doo Speedster Handbuch

Sea-doo

Sea-doo 1997 SP Handbuch

Sea-doo

Sea-doo GTI Series Handbuch

Sea-doo

Sea-doo RXP-X 260 Handbuch

Sea-doo

Sea-doo GTS Series Handbuch

Sea-doo

Sea-doo SWITCH 13 FT 2022 Handbuch

Sea-doo

Sea-doo 2012 Sea Doo GTX series Handbuch

Sea-doo

Sea-doo 4-TEC series 2008 Installationsanleitung

Sea-doo

Sea-doo 2003 XP DI Installationsanleitung

Sea-doo

Sea-doo 2004 3D RFI Bedienungsanleitung

Sea-doo

Sea-doo 2001 GS Bedienungsanleitung

Sea-doo

Sea-doo Racino Benutzerhandbuch

Sea-doo

Sea-doo 1997 SP Installationsanleitung

Sea-doo

Sea-doo ISLANDIA Handbuch

Sea-doo

Sea-doo RXT iS 255 2009 Installationsanleitung

Sea-doo

Sea-doo GTX+ Bedienungsanleitung

Sea-doo

Sea-doo GTS Series Handbuch

Sea-doo

Sea-doo GS5847 Handbuch

Beliebte Boot Handbücher anderer Marken

Raymarine

Raymarine ST70 Instrument Bedienungsanleitung

Pro-Line Boats

Pro-Line Boats Pro Line 19 Sport Bedienungsanleitung

Jeanneau

Jeanneau CAP CAMARAT 8.5 CC Bedienungsanleitung

Tiara Yachts

Tiara Yachts C49 2024 Bedienungsanleitung

Monterey Boats

Monterey Boats Sport Yacht 330 Bedienungsanleitung

J 105 Bedienungsanleitung

PURSUIT

PURSUIT OS 335 Bedienungsanleitung

Boston Whaler

Boston Whaler CONQUEST 345 Bedienungsanleitung

Jeanneau

Jeanneau SUN ODYSSEY 41 DS Bedienungsanleitung

Meridian

Meridian 490 Pilothouse Bedienungsanleitung

Advanced Elements

Advanced Elements AdvancedFrame Expedition AE1009 Bedienungsanleitung

Robo Marine Indonesia

Robo Marine Indonesia GEOMAR Bedienungsanleitung

Swallow Boats

Swallow Boats BayRaider Bedienungsanleitung

Intex

Intex Excursion 5 Set Bedienungsanleitung

X SHORE

X SHORE EELEX 8000 Bedienungsanleitung

ISLAND PACKET

ISLAND PACKET 370 Bedienungsanleitung

Sea Ray

Sea Ray 175 Sport Bedienungsanleitung

Regal

Regal 2300 Bedienungsanleitung