Sealey AP2010 Bedienungsanleitung

INSTRUCTIONS FOR:

HARDWOOD TOP WORK BENCH

( WITH CUPBOARD ) MODEL :A

AP2010

The use of symbols in this document is to attract your attention to possible danger. The symbols and warnings themselves do not eliminate any danger, nor are they substitutes for proper

accident prevention measures.

Thank you for purchasing a Sealey product. Manufactured to a high standard this product will, if used according to these instructions and

properly maintained, give you years of trouble free performance.

1. SAFETY INSTRUCTIONS

IMPORTANT: PLEASE READ THESE INSTRUCTIONS CAREFULLY. NOTE THE SAFE OPERATIONAL REQUIREMENTS, WARNINGS & CAUTIONS.

USE THE PRODUCT CORRECTLY AND WITH CARE FOR THE PURPOSE FOR WHICH IT IS INTENDED. FAILURE TO DO SO MAY CAUSE

DAMAGE OR PERSONAL INJURY, AND WILL INVALIDATE THE WARRANTY. PLEASE KEEP INSTRUCTIONS SAFE FOR FUTURE USE.

2. CONTENTS

1.1 GENERAL SAFETY

pWARNING! Ensure Health & Safety, local authority, and general workshop practice regulations are adhered to when using this bench.

3Locate bench in a suitable working area.

3Keep the work area clean, uncluttered and ensure there is adequate lighting.

pWARNING! Use bench on level and solid ground, preferably concrete. Avoid tarmacadam since the bench may sink into the surface.

3Keep the bench clean and tidy in accordance with good workshop practice.

3Keep children and unauthorised persons away from the working area.

7DO NOT use the bench for any purpose other than that for which it is designed.

7DO NOT undertake work on the bench without the workpiece being adequately secured. Use clamps or a vice (not included) to secure the

workpiece. Available from your Sealey dealer.

7DO NOT use the bench outdoors.

7DO NOT get the bench wet or use in damp or wet locations or areas where there is condensation.

7DO NOT clean the bench with any solvents which may damage the paint surface or the protective coating on the wooden top.

AP2010 - 1 - 180102

01284 757500

E-mail:

sales@sealey.co.uk

01284 703534

Sole UK Distributor, Sealey Group,

Bury St. Edmunds, Suffolk.

NOTE: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior notice.

IMPORTANT: No liability is accepted for incorrect use of product. WARRANTY: Guarantee is 12 months from purchase date, proof of which will be required

for any claim. INFORMATION: Call us for a copy of our latest catalogue on 01284 757525 and leave your full name and address including your postcode.

2.0 Carefully unpack the product and check the contents against the diagram below. Should any items be missing or damaged make

immediate contact with your Sealey dealer.

3. ASSEMBLY

AP2010 - 1 - 180102

STEP 1. Take one crossrail (B) and one

crossrail (D) and bolt them to the cabinet sides

(A) using 8 bolts (O), 8 lock washers(P), and 8

nuts (Q). Ensure that the pairs of holes that

accept the corner braces are facing

downwards. ( Refer to STEP 8.)

STEP 4. Bolt into position rear crossrail (B).

Take door (J) and drop lower hinge pin into the

hole in lower cross rail. Hold door in position

and bolt in place front crossrail (D) ensuring

that the upper hinge pin has entered the hinge

hole in underside of crossrail. You will need 12

bolts (O), 12 lock washers (P), and 12 nuts (Q).

STEP 5. Bolt the two back wall panels (F) to

the rear of the cabinet using 8 bolts (O), 8 lock

washers (P), and 8 nuts (Q).

STEP 6. Bolt the two shelf parts (H) into the left

hand compartment of the cabinet using 8 bolts

(O), 8 lock washers (P), and 8 nuts (Q).

STEP 2. Bolt centre support (C) to the rear

lower crossrail (B) and front centre support (E)

to the front lower crossrail (D) using 4 bolts (O),

4 lock washers(P), and 4 nuts (Q).

STEP 3. Bolt inner shelf supports (G) to the

centre supports and right hand side panel

using 4 bolts (O), 4 lock washers (P), and 4

nuts (Q). Leave out top bolt on rear centre

support until back panel is required in STEP 5.

AP2010 - 1 - 180102

01284 757500

E-mail:

sales@sealey.co.uk

01284 703534

Sole UK Distributor, Sealey Group,

Bury St. Edmunds, Suffolk.

STEP 7. Place the wooden top (N) face down

on a flat, clean, smooth surface. Place the

cabinet upside down on the wooden top and

align it with the four pre-drilled holes. Fix with

the four hex head screws (S). Screw into place

the four adjustable leg levelers (R).

Place the finished workbench in its final location and adjust the leg levelers so that

the bench is both level and stable in use.

STEP 10. Put shelf component (K) into place at desired

height inside cupboard.

STEP 8. Bolt the four corner braces (I) into

place using 16 bolts (O), 16 lock washers (P),

and 16 nuts (Q).

STEP 9. Bolt one shelf part (K) to the underside

of the cupboard compartment as indicated

above using 4 bolts (O), 4 lock washers (P),

and 4 nuts (Q). Tighten all fixings and turn

workbench the right way up.

Andere Sealey Werkzeugaufbewahrung Handbücher

Sealey

Sealey P0618.V2 Bedienungsanleitung

Sealey

Sealey AP6310.V2 Bedienungsanleitung

Sealey

Sealey AP26479TBRG Bedienungsanleitung

Sealey

Sealey SCR90 Bedienungsanleitung

Sealey

Sealey AP1248SS.V2 Bedienungsanleitung

Sealey

Sealey AP556CSHV Bedienungsanleitung

Sealey

Sealey AP41104BWS Bedienungsanleitung

Sealey

Sealey AP1100M Bedienungsanleitung

Sealey

Sealey AP22 Series Bedienungsanleitung

Sealey

Sealey AP0618.V4 Bedienungsanleitung

Sealey

Sealey AP1200MW Bedienungsanleitung

Sealey

Sealey FWB1 Bedienungsanleitung

Sealey

Sealey PTB66004SS Bedienungsanleitung

Sealey

Sealey PCT1 Bedienungsanleitung

Sealey

Sealey POWER PRODUCTS AP1010.V2 Bedienungsanleitung

Sealey

Sealey PTB91508 Bedienungsanleitung

Sealey

Sealey PTB104008 Bedienungsanleitung

Sealey

Sealey AP1010 Bedienungsanleitung

Sealey

Sealey AP2030BB Bedienungsanleitung

Sealey

Sealey SC01 Bedienungsanleitung

Sealey

Sealey AP12160 Bedienungsanleitung

Sealey

Sealey AP12600.V4 Bedienungsanleitung

Sealey

Sealey AP930M Bedienungsanleitung

Sealey

Sealey CX1042D Bedienungsanleitung

Beliebte Werkzeugaufbewahrung Handbücher anderer Marken

Ryobi

Ryobi RWB03 Bedienungsanleitung

Husky

Husky H27CH5TR4BGK Bedienungsanleitung

Scheppach

Scheppach ts 2100 Bedienungsanleitung

Cornwell Tools

Cornwell Tools CTB360AKBK Bedienungsanleitung

DIVERSIFIED WOODCRAFTS

DIVERSIFIED WOODCRAFTS SHAIN GSB-6024 Bedienungsanleitung

Cassese

Cassese CS200 CART Bedienungsanleitung

Kendall Howard

Kendall Howard ESDW-9630-1000 Bedienungsanleitung

Lista

Lista Align Montageanleitung

Workzone

Workzone 99609 Bedienungsanleitung

Stanley

Stanley STST83800-1 Bedienungsanleitung

Homak

Homak PROFESSIONAL Series Systemhandbuch

Perel

Perel ROLLER SHUTTER STORAGE CABINET Bedienungsanleitung

Husky

Husky H5CH2R Bedienungsanleitung

BGS technic

BGS technic 4107 Bedienungsanleitung

Clarke

Clarke CWB1250 Bedienungsanleitung

Ryobi

Ryobi RWB02 Bedienungsanleitung

Husky

Husky H52CH6HDV3WHT Bedienungsanleitung

General International

General International Excalibur 40-100 Stücklistenhandbuch