Secure Premier 300 Gebrauchsanweisung
METER TRACKSO CONNECTION MANUAL FOR SECURE PREMIER 300 METER
Brand: Secure
Models: Premier 300 with Modbus RJ11-RS485 Output
Note: Documentation is only valid for Meter model having RS485 Modbus communication facility.
CONNEC TI O N DIAGRAM
On the bottom side of the, Secure Premier 300 has an RJ11 socket which acts a RS-485 communication output as shown in the
following figure.
Figure S1
1. Create Connecting wire with RJ11 output with 4 wires.
2. Connect the cables to RJ11 socket at the bottom of the meter
Table ST1 –Secure Premier 300 RJ11-RS485
connections with TrackSo IoT Gateway
Secure Pin No. &
Assignment
TrackSo Pin No. &
Assignment
RJ11 –Pin 3
3
D+
RJ11 –Pin 4
4
D-
DEFAULT CONFIGURATION IN TRACKSO IOT GATEWAY
Inverter ID: 1
Baud Rate: 9600
Data Bits: 8
Stop Bit: 1
Parity: N/A (None)
CONFIGURATION AT THE METER END
SETTING BAUD RATE, DEVICE ID
-As per the local Secure representative the Device Id (Modbus Id) as well as baud rates remains fixed and cannot be
modified.
-No documentation is available in public domain or on manufacture website which confirm if Id and baud rate can be
changed.
-If found otherwise kindly inform us on [email protected]
CONNECTING MULTIPLE METER
As Modbus ID’s are not allowed to be changed multiple meters can not be connected on a single logger.
Andere Handbücher für Premier 300
1
Andere Secure Messgerät Handbücher
Secure
Secure TRACKSO ELITE 103-2 Bedienungsanleitung
Secure
Secure Liberty 100 Bedienungsanleitung
Secure
Secure Elite 440 Bedienungsanleitung
Secure
Secure Premier 300 Bedienungsanleitung
Secure
Secure PADS-2 Bedienungsanleitung
Secure
Secure Premier 211 Bedienungsanleitung
Secure
Secure Sprint 211 Bedienungsanleitung
Secure
Secure BGX501-806-R02 Bedienungsanleitung
Secure
Secure APEX 100 Bedienungsanleitung
Secure
Secure SSP 302 Betriebsanleitung
