Sega OutRun2SP Bedienungsanleitung

1ST PRINTING MARCH ‘05

MANUAL NO. 999-2313

Owner’s Manual

SEGA AMUSEMENTS USA, INC.

Standard Version

www.sauservice.com

GAME CODE: ORP

VISIT OUR WEBSITE!

Now with a new look to make your experience that

much easier.

BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING:

To maintain the safety:

To ensure the safe usage of the product, be sure to read the following before using the product. The following

instructions are intended for the users, operators and the personnel in charge of the operation of the product.

After carefully reading and sufﬁciently understanding the warning displays and cautions, handle the product

appropriately. Be sure to keep this manual nearby the product or elsewhere convenient for referring to it

when necessary.

Herein, explanations which require special attention are enclosed with dual lines. Depending on the poten-

tially hazardous degrees, the terms of WARNING, CAUTION, etc. are used. Be sure to understand the

contents of the displays before reading the text.

Indicates that mishandling the prod-

uct by disregarding this warning

will cause a potentially hazardous

situation which can result in death

or serious injury.

Indicates that mishandling the product

by disregarding this caution will cause

a slight hazardous situation which can

result in personal injury and or material

damage.

For the safe usage of the product, the following pictographs are used:

Indicates “HANDLE WITH CARE.” In order to protect the human body an equipment, this dis-

play is attached to places where the Owner’s Manual and or Service Manual should be referred to.

Perform work in accordance with the instructions herein stated.

Instructions for work are explained by paying attention to the aspect of accident prevention. Failing to perform

work as per the instructions can cause accidents. In the case where only those who have technical expertise

should perform the work to avoid hazardous situation, the instructions herein state that the serviceman should

perform such work.

Be sure to turn off power before working on the machine.

To prevent electric shock, be sure to turn off power before starting the work in which the worker touches the in-

terior of the product. If the work is to be performed in the power-on status, the Instruction Manual herein always

states to that effect.

Be sure to ground the Earth Terminal (this, however, is not required in the case where a power cord with earth

is used).

This product is equipped with the Earth Terminal. When installing the product, Connect the Earth Terminal to the

“accurately grounded indoor earth terminal” by using an earth wire. Unless the product is grounded appropriately,

the user can be subject to electric shock. After performing repair, etc. for the Control equipment, ensure that the

Earth Wire is ﬁrmly connected to the Control equipment.

Ensure that the Power Supply used is equipped with an Earth Leakage Breaker.

This product does not incorporate the Earth Leakage Breaker. Using a power supply which is not equipped with

the Earth Leakage Breaker can cause a ﬁre when earth leakage occurs.

Be sure to use fuses which meet the speciﬁed rating. (only for the machines which use fuses).

Using fuses exceeding the speciﬁed rating can cause a ﬁre and electric shock.

WARNING! CAUTION!

Speciﬁcation changes (removal of equipment, conversion and addition) not designated by SEGA are not

allowed.

The parts of the product include warning labels for safety, covers for personal protection, etc. It is very hazard-

ous to operate the product by removing parts and or modifying the circuits. Should doors, lids and protective

parts be damaged or lost, refrain from operating the product, and contact where the product was purchased from

or the ofﬁce herein stated. SEGA shall not be held responsible for any accidents, compensation for damage to a

third party, resulting from the speciﬁcations not designated by SEGA.

Ensure that the product meets the requirements of appropriate Electrical Speciﬁcations.

Before installing the product, check for Electrical Speciﬁcations. SEGA products have a nameplate on which

Electrical Speciﬁcations are described. Ensure that the product is compatible with the power supply voltage and

frequency requirements of the location. Using any Electrical Speciﬁcations different from the designated Speci-

ﬁcations can cause a ﬁre and electric shock.

Install and operate the product in places where appropriate lighting is available, allowing warning labels

to be clearly read.

To ensure safety for the customers, labels and printed instructions describing potentially hazardous situation

are applied to places where accidents can be caused. Ensure that where the product is operated has sufﬁcient

lighting allowing the warnings to be read. If any label is peeled off, apply it again immediately. Please place an

order with where the product was purchased from or the ofﬁce herein stated.

When handling the Monitor, be very careful. (Applies only to the product w/monitor.)

Some of the monitor (TV) parts are subject to high tension voltage. Even after running off power, some por-

tions are still subject to high tension voltage sometimes. Monitor repair and replacement should be performed

only be those technical personnel who have knowledge of electricity and technical expertise.

Be sure to adjust the monitor (projector) properly. (Applies only to the product w/monitor.)

Do not operate the product leaving on-screen ﬂickering or blurring as it is. Using the product with the monitor

not properly adjusted may cause dizziness or a headache to an operator, a player, or the customers.

When transporting or reselling this product, be sure to attach this manual to the product.

In the case where commercially available monitors and printers are used in this product, only the contents relat-

ing to this product are explained herein. Some commercially available equipment has functions and reactions

not stated in this manual. Read this manual together with the speciﬁc Instruction Manual of such equipment.

Descriptions herein contained may be subject to improvement changes without notice.

The contents described herein are fully prepared with due care. However, should any question arise or errors be

found, please contact SEGA.

•

INSPECTIONS IMMEDIATELY AFTER TRANSPORTING THE PRODUCT TO THE LOCATION.

Normally, at the time of shipment, SEGA products are in a status allowing for usage immediately after trans-

porting to the location. Nevertheless, an irregular situation may occur during transportation. Before turning on

power, check the following points to ensure that the product has been transported in a satisfactory status.

Are there any dented portions or defects (cuts, etc.) on the external surfaces of the cabinet?

Are Casters and Adjusters, damaged?

Do the power supply voltage and frequency requirements meet with those of the location?

Are all wiring connectors correctly and securely connected? Unless connected in the correct direction, connector

connections can not be made accurately. Do not insert connectors forcibly.

Do power cords have cuts and dents?

Do the fuses used meet speciﬁed rating? Is the Circuit Protector in an energized status?

Are all accessories available?

Can all Doors and Lids be opened with the Accessory keys? Can Doors and Lids be ﬁrmly closed?

TABLE OF CONTENTS

BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING:

TABLE OF CONTENTS

INTRODUCTION OF THE OWNER’S MANUAL

1. HANDLING PRECAUTIONS ..........................................................................................

2. PRECAUTIONS CONCERNING INSTALLATION LOCATION ...................................

3. OPERATION ......................................................................................................................

4. NAME OF PARTS .............................................................................................................

5. ACCESSORIES .................................................................................................................

6. ASSEMBLING AND INSTALLATION .............................................................................

7. PRECAUTIONS WHEN MOVING THE MACHINE ......................................................

8. GAME DESCRIPTION .....................................................................................................

9. EXPLANATION OF TEST AND DATA DISPLAY .........................................................

10. HANDLE MECHANISM ...................................................................................................

11. SHIFT LEVER ...................................................................................................................

12. ACCEL & BRAKES(S) ......................................................................................................

13. COIN SELECTOR .............................................................................................................

14. MONITOR ..........................................................................................................................

15. PERIODIC INSPECTION TABLE ....................................................................................

16. GAME BOARD .................................................................................................................

17. NETWORK PLAY .............................................................................................................

18. DESIGN RELATED PARTS .............................................................................................

19. PARTS LIST .......................................................................................................................

20. WIRE COLOR CODE TABLE ...........................................................................................

21. WIRING DIAGRAMS ........................................................................................................

1 - 2

3 - 4

5 - 8

10 - 12

13 - 22

23 - 24

25 - 50

51 - 76

77 - 79

80 - 81

82 - 83

84 - 86

87 - 89

90 - 91

92 - 98

99 - 101

102

103 - 110

111

XXX

SPECIFICATIONS

INTRODUCTION OF THE OWNERS MANUAL

This Owner's Manual is intended to provide detailed descriptions together with all the necessary

information covering the general operation of electronic assemblies, electromechanicals, servic-

ing control, spare parts, etc. as regards the product,

OUTRUN 2 SPECIAL TOURS STANDARD TYPE.

This manual is intended for the owners, personnel and managers in charge of operation of the

product. Operate the product after carefully reading and sufﬁciently understanding the instruc-

tions. If the product fails to function satisfactorily, non-technical personnel should under no

circumstances touch the internal system. Please contact where the product was purchased from.

SEGA AMUSEMENTS USA, INC. / CUSTOMER SERVICE

45133 Industrial Drive, Fremont, California 94538, U.S.A.

Phone : (415) 701-6580

Fax : (415) 701-6594

Use of this product is unlikely to cause physical injuries or damages to property. However, where

special attention is required this is indicated by a thick line, the word "IMPORTANT" and its sign in

this manual.

Indicates that mishandling the product by disregarding this display can cause the product's

intrinsic performance not to be obtained, resulting in malfunctioning.

Installation Space : 36 inches wide X 78 inches deep

Height : 82 inches

Width : 30.5 inches

Length : 70 inches

Weight : ~680 lbs

Power, maximum current : 540 W 4.5 A (AC 120V 60 Hz AREA)

MONITOR : 29 inch supplied by Sanwa

Monitor: 998-0162

Chassis: 998-0161

STOP

IMPORTANT!

◆ PRODUCTION DATE ◆

This SEGA product was produced in the year of:

2005

This signiﬁes that this work was disclosed in 2005.

DEFINITION OF LOCATION MAINTENANCE MAN AND SERVICEMAN

Non-technical personnel who do not have technical knowledge and expertise should re-

frain from performing such work that this manual requires the location's maintenance man

or a serviceman to carry out, or work which is not explained in this manual. Failing to

comply with this instruction can cause a severe accident such as electric shock.

Ensure that parts replacement, servicing & inspections, and troubleshooting are performed by the location's

maintenance man or the serviceman. It is instructed herein that particularly hazardous work should be per-

formed by the serviceman who has technical expertise and knowledge.

The location's maintenance man and serviceman are herein deﬁned as follows:

"Location's Maintenance Man" :

Those who have experience in the maintenance of amusement equipment and vending machines, etc., and also

participate in the servicing and control of the equipment through such routine work as equipment assembly

and installation, servicing and inspections, replacement of units and consumables, etc. within the Amusement

Facilities and or locations under the management of the Owner and Owner's Operators of the product.

Activities of Location's Maintenance Man :

Assembly & installation, servicing & inspections, and replacement of units & consumables as regards amuse-

ment equipment, vending machines, etc.

Serviceman :

Those who participate in the designing, manufacturing, inspections and maintenance service of the equipment

at an amusement equipment manufacturer.

Those who have technical expertise equivalent to that of technical high school graduates as regards electricity,

electronics and or mechanical engineering, and daily take part in the servicing & control and repair of amuse-

ment equipment.

Serviceman's Activities :

Assembly & installation and repair & adjustments of electrical, electronic and mechanical parts of amusement

equipment and vending machines.

WARNING!

LISTED

5K92

AMUSEMENT MACHINE

Notes:

1www.sauservice.com

1. HANDLING PRECAUTIONS

When installing or inspecting the machine, be very careful of the following points and pay at-

tention to ensure that the player can enjoy the game safely.

Non-compliance with the following points or inappropriate handling running counter to the cau-

tionary matters herein stated can cause personal injury or damage to the machine.

● Before performing work, be sure to turn power off. Performing the work

without turning power off can cause an electric shock or short circuit. In the

case work should be performed in the status of power on, this manual always

states to that effect.

● To avoid electric shock or short circuit, do not plug in or unplug quickly.

● To avoid electric shock, do not plug in or unplug with a wet hand.

● Do not expose Power Cords and Earth Wires on the surface, (ﬂoor, passage,

etc.). If exposed, the Power Cords and Earth Wires are susceptible to damage.

Damaged cords and wires can cause electric shock or short circuit.

● To avoid causing a ﬁre or electric shock, do not put things on or damage

Power Cords.

● When or after installing the product, do not unnecessarily pull the power cord.

If damaged, the power cord can cause a ﬁre or electric shock.

● In case the power cord is damaged, ask for replacement through where the

product was purchased from or the ofﬁce herein stated. Using the cord as is

damaged can cause ﬁre, electric shock or leakage.

● Be sure to perform grounding appropriately. Inappropriate grounding can

cause an electric shock.

● Be sure to use fuses meeting speciﬁed rating. Using fuses exceeding the

speciﬁed rating can cause a ﬁre or electric shock.

● Completely make connector connections for IC BD and others. Insufﬁcient

insertion can cause an electric shock.

● Speciﬁcation changes, removal of equipment, conversion and/or addition, not

designated by SEGA are not permitted.

• Failure to observe this may cause a ﬁre or an electric shock. Non-compliance

with this instruction can have a bad inﬂuence upon physical conditions of the

players or the lookers-on, or result in injury during play.

• SEGA shall not be held responsible for damage, compensation for damage to

a third party, caused by speciﬁcation changes not designated by SEGA.

● Be sure to perform periodic maintenance inspections herein stated.

WARNING!

www.sauservice.com

● For the IC board circuit inspections, only the logic tester is allowed. The use

of a multiple-purpose tester is not permitted, so be careful in this regard.

● The Projector is employed for this machine. The Projector's screen is

susceptible to damage, therefore, be very careful when cleaning the screen.

For details, refer to PROJECTOR.

● Static electricity from your body may damage some electronics devices on the

IC board. Before handling the IC board, touch a grounded metallic surface so

that the static electricity can be discharged.

● Some parts are the ones designed and manufactured not speciﬁcally for

this game machine. The manufacturers may discontinue, or change the

speciﬁcations of, such general-purpose parts. If this is the case, Sega cannot

repair or replace a failed game machine whether or not a warranty period has

expired.

STOP

IMPORTANT!

Inhaltsverzeichnis

Andere Sega Arcade-Spielautomat Handbücher

Sega

Sega Let's Go ISLAND! Bedienungsanleitung

Sega

Sega The House Of The Dead 4 29"STD Bedienungsanleitung

Sega

Sega Ford Racing Full Blown Deluxe Bedienungsanleitung

Sega

Sega RALLY 3 DELUXE Bedienungsanleitung

Sega

Sega HOUSE OF THE DEAD 4 SUPER DELUXE Bedienungsanleitung

Sega

Sega MISSION IMPOSSIBLE ARCADE Anwendungshandbuch

Sega

Sega GRID Racing DELUXE Bedienungsanleitung

Sega

Sega Triple Play Bedienungsanleitung

Sega

Sega OUTRUN 2 SPECIAL TOURS DELUXE Bedienungsanleitung

Sega

Sega Transformers Human Alliance Bedienungsanleitung

Sega

Sega STAR WARS RACER ARCADE Deluxe Version Bedienungsanleitung

Sega

Sega AFTER BURNER CLIMAX Bedienungsanleitung

Sega

Sega THE KING OF ROUTE 66 Bedienungsanleitung

Sega

Sega Crazy Taxi Bedienungsanleitung

Sega

Sega Sonic Allstarts Bedienungsanleitung

Sega

Sega MARIO & SONIC AT THE RIO 2016 OLYMPIC GAMES Anwendungshandbuch

Sega

Sega World Club Champion Football European Clubs... Bedienungsanleitung

Sega

Sega BEJEWELED Bedienungsanleitung

Sega

Sega Snakes & Ladders Bedienungsanleitung

Sega

Sega PRIMEVAL HUNT Bedienungsanleitung

Sega

Sega SpongeBob SQUAREPANTS Bedienungsanleitung

Sega

Sega Future Tone ProjectDIVA Arcade Bedienungsanleitung

Sega

Sega Capcom vs SNK 2 Fehlerbehebungshandbuch

Sega

Sega Clay Challenge Bedienungsanleitung

Beliebte Arcade-Spielautomat Handbücher anderer Marken

Universal Space

Universal Space COCONUT BASH Bedienungsanleitung

Bay-Tek

Bay-Tek EVOLVE Bedienungsanleitung

Global VR

Global VR America's Army Montage- und Bedienungsanleitung

Atronic

Atronic Cashline Bedienungsanleitung

Universal Space

Universal Space Checky Monkey Bedienungsanleitung

Bay-Tek

Bay-Tek Skee Ball 1908 Alley Bedienungsanleitung

Aristocrat Technologies

Aristocrat Technologies Mars X Upright Bedienungsanleitung

Family Fun Companies

Family Fun Companies Reactor Kurzanleitung

Universal Space

Universal Space FRUIT MANIA Extreme Bedienungsanleitung

falgas

falgas CARRUSEL FIESTA Bedienungsanleitung

Konami

Konami DanceDanceRevolution Bedienungsanleitung

Bay-Tek

Bay-Tek quik drop Bedienungsanleitung

Bandai Namco

Bandai Namco PAC-MAN BATTLE ROYALE CHOMPIONSHIP DELUXE Bedienungsanleitung

Adrenaline

Adrenaline Flying Tickets Montage- und Bedienungsanleitung

Swinks

Swinks Stern Pinball Ghostbusters Bedienungsanleitung

Innovative Concepts in Entertainment

Innovative Concepts in Entertainment MONOPOLY ROLL-N-GO Bedienungsanleitung

jakar

jakar SPEED CARS Bedienungsanleitung

Carmelli

Carmelli HAT TRICK NG1015H Bedienungsanleitung