Sega Rambo Bedienungsanleitung

OWNER'S MANUAL

IMPORTANT

• Before using this product, read this manual carefully to understand the

contents herein stated.

• After reading this manual, be sure to keep it near the product or in a

convenient place for easy reference when necessary.

800 ARTHUR AVENUE, ELK GROVE VILLAGE, IL 60007-5215

Phone: 888-877-2669 Facsimile: 847-427-1065

WEB: WWW.SAU.SEGA.COM

All manufacturers, cars, names, brands and associated imagery featured in this game are trademarks and/or

550-30-303

1ST PRINTING SEP. 2008

SEGA AMUSEMENTS U.S.A., INC.

TABLE OF CONTENTS

BEFORE USING THE PRODUCT, BE SURE TO READ THE FOLLOWING:

TABLE OF CONTENTS....................................................................................... i

INTRODUCTION ................................................................................................ iv

1HANDLING PRECAUTIONS ......................................................................... 1

2PRECAUTIONS REGARDING INSTALLATION LOCATION........................ 3

2-1 LIMITATIONS OF USAGE ................................................................................................3

3 PRPRECAUTIONS REGARDING PRODUCT OPERATION ......................... 4

4ASSSEMBLY AND INSTALLATION .............................................................. 7

4-3 FIXATION TO INSTALLATION SITE..............................................................................10

4-4 TURNING ON THE POWER ..........................................................................................12

4-5 CHECKING ASSEMBLY (SETUP) .................................................................................14

5 PRECAUTIONS WHEN MOVING THE MACHINE ..........................................................................18

68GAME DESCRIPTION ......................................................................................................................20

6-1 HOW TO PLAY ...............................................................................................................20

6-2 HINTS FOR PLAYING THE GAME ................................................................................25

TABLE OF CONTENTS

7TEST MODE ................................................................................................ 26

7-1 SWITCH UNIT AND COIN METER ................................................................................28

7-2 SYSTEM TEST MODE ...................................................................................................29

7-3 GAME TEST MODE .......................................................................................................31

7-3-1 GAME TEST MODE Menu....................................................................................31

7-3-2 INPUT TEST ..........................................................................................................33

7-3-3 OUTPUT TEST ......................................................................................................34

7-3-4 GAME ASSIGNMENTS.........................................................................................35

7-3-5 GUN ADJUSTMENT..............................................................................................36

7-3-6 BOOKKEEPING ....................................................................................................41

7-3-7 BACKUP DATA CLEAR ........................................................................................44

810COIN SELECTOR ....................................................................................... 46

9PERIODIC INSPECTION.............................................................................. 47

10 TROUBLESHOOTING................................................................................. 49

11 GAME BOARD ............................................................................................ 51

11-1 REMOVING THE LINDBERGH ....................................................................................51

11-2 CLEANING THE LINDBERGH RED EX.......................................................................52

11-3 COMPOSITION OF THE GAME BOARD.....................................................................55

12 PARTS LIST................................................................................................. 56

13 WIRING DIAGRAM...................................................................................... 60

INTRODUCTION

iii

INTRODUCTION

This manual is intended to provide detailed descriptions together with all the necessary information covering the

general operation of electronic assemblies, electro-mechanicals, servicing control, spare parts, etc. for the product,

“PRIMEVAL HUNT DX.”

This manual is intended for the owners, personnel and managers in charge of operation of the product.

Operate the product after carefully reading and sufciently understanding the instructions.

In the unlikely event that the product does not function correctly, DO NOT allow anyone other than a technician

to touch the internal system. Turn off the power to the machine, making sure to unplug the electrical cord from the

outlet, and contact the ofce listed below or the point of purchase for this product.

Use of this product is unlikely to cause physical injuries or damage to property. However, points that require special

attention are indicated by bold text, the word “IMPORTANT” and the symbol below.

Indicates important information that, if ignored, may result in the mishandling of

the product and cause faulty operation or damage to the product.

Sega Amusements U.S.A., Inc.

800 Arthur Avenue, Elk Grove Village, IL 60007-5215, U.S.A.

TEL: 1-847-364-9787

TOLL FREE: 1-888-877-2669

FAX: 1-847-427-1065

INTRODUCTION

Denition of 'Site Maintenance Personnel or Other Qualied Individuals'

Procedures not described in this manual or marked as 'to be carried out by site

maintenance personnel or other qualied professionals' should not be carried

out by personnel without the necessary skill or technology. Work carried out by

unqualied persons may cause serious accidents, including electrocution.

Parts replacement, maintenance inspections and troubleshooting should be carried out by site maintenance personnel

or other qualied professionals. This manual includes directions for potentially dangerous procedures which should

only be carried out by professionals with the appropriate specialized knowledge.

The site maintenance personnel or other qualied professionals mentioned in this manual are dened as follows:

Site maintenance personnel:

Individuals with experience in maintaining amusement equipment, vending machines, etc., working under the

supervision of the owner/operator of this product to maintain machines within amusement facilities or similar

premises by carrying out everyday procedures such as assembly, maintenance inspections, and replacement of units/

expendable parts.

Activities to be carried out by site maintenance personnel:

Amusement equipment/vending machine assembly, maintenance inspection and replacement of units/expendable

parts.

Other qualied professionals:

Persons employed by amusement equipment manufacturers, or involved in design, production, testing or

maintenance of amusement equipment. The individual should have either graduated from technical school or hold

similar qualications in electrical/electronics/mechanical engineering.

Activities to be carried out by other qualied professionals:

Amusement equipment/vending machine assembly, repair/adjustment of electrical/electronic/mechanical parts.

HANDLING PRECAUTIONS

When installing or inspecting the machine, be very careful of the following points and pay attention to ensure that

the player can enjoy the game safely.

Non-compliance with the following points or inappropriate handling running counter to the cautionary matters

herein stated can cause personal injury or damage to the machine.

● Before performing work, be sure to turn the power off. Performing the work

without turning the power off can cause an electric shock or short circuit. In the

case work should be performed in the status of power on, this manual always

states to that effect.

● To avoid an electric shock or short circuit, do not plug in or unplug quickly.

● To avoid an electric shock, do not plug in or unplug with a wet hand.

● Do not expose power cords or earth wires on the surface, (oor, passage,

etc.). If exposed, the power cords and earth wires are susceptible to damage.

Damaged cords and wires can cause an electric shock or short circuit.

● To avoid causing a re or an electric shock, do not put things on or damage the

power cords.

● When or after installing the product, do not unnecessarily pull the power cord. If

damaged, the power cord can cause a re or an electric shock.

● In case the power cord is damaged, ask for a replacement through where the

product was purchased from or the ofce herein stated. Using the cord as is

damaged can cause re, an electric shock or leakage.

● Be sure to perform grounding appropriately. Inappropriate grounding can cause

an electric shock.

● Be sure that connections such as IC BD are made properly. Insufcient insertion

can cause an electric shock.

● Specication changes, removal of equipment, conversion and/or addition, not

designated by SEGA are not permitted.

- Failure to observe this may cause a re or an electric shock. Non-compliance

with this instruction can have a bad inuence upon physical conditions of the

players or the onlookers, or result in injury during play.

- SEGA shall not be held responsible for damage, compensation for damage to

a third party, caused by specication changes not designated by SEGA.

● Do not perform any work or change parts not listed in this manual. Doing so may

lead to an accident.

　If you need to perform any work not listed in this manual, request work from the

ofce indicated in this manual or the point of purchase, or inquires for details.

● Be sure to perform periodic maintenance inspections herein stated.

HANDLING PRECAUTIONS

● For the IC board circuit inspections, only the logic tester is allowed. The use of a

multiple-purpose tester is not permitted, so be careful in this regard.

● Static electricity from your body may damage some electronics devices on the

IC board. Before handling the IC board, touch a grounded metallic surface so

that the static electricity can be discharged.

● This product uses a DLP projector. DLP projector screens scratch easily, so be

careful when cleaning the screen.

● Some parts are not designed and manufactured specically for this game

machine. The manufacturers may discontinue, or change the specications of

such general-purpose parts. If this is the case, SEGA cannot repair or replace a

failed game machine whether or not a warranty period has expired.

CONCERNING THE STICKER DISPLAY

CONCERNING WARNING DISPLAYS

This SEGA product has stickers attached describing the product manufacture No. (Serial No.) and Electrical

Specications. It also has a Sticker describing where to contact for repair and for purchasing parts.

When inquiring about or asking for repairs, mention the Serial No. and Name of Machine indicated on the Sticker.

The Serial Number indicates the product register. Identical machines could have different parts depending on the

date of production. Also, improvements and modications might have been made after the publication of this

manual. In order to ensure you order the correct parts, mention the Serial No. when contacting the applicable places.

This SEGA product has warning displays on stickers, labels and/or printed instructions adhered/attached to or

incorporated in the places where a potentially hazardous situation could arise. The warning displays are intended

for accident prevention for customers and for avoiding hazardous situations relating to maintenance and servicing

work. Some portions of the cabinet contain high voltage and may cause accidents if touched. When performing

maintenance, be very careful of the warning displays. It is especially important that any complex repair and

replacement work not mentioned herein should be performed by those technical personnel who have knowledge of

electricity and technical expertise.

In order to prevent accidents, caution any customer ignoring the warnings to cease and desist immediately.

PRECAUTIONS REGARDING INSTALLATION LOCATION

This product is an indoor game machine. Do not install it outside. Even indoors,

avoid installing in places mentioned below so as not to cause a re, electric

shock, injury and/or malfunction.

- Places subject to rain or water leakage, or places subject to high humidity in the

proximity of an indoor swimming pool and/or shower, etc.

- Places subject to direct sunlight, or places subject to high temperatures in the

proximity of heating units, etc.

- Places lled with inammable gas or vicinity of highly inammable/volatile

chemicals or hazardous matter.

- Dusty places.

- Sloped surfaces.

- Places subject to any type of violent impact.

- Vicinity of anti-disaster facilities such as re exits and re extinguishers.

- Areas where the temperature exceeds the applicable temperature (ambient

temperature) range of 10 to 30 degrees centigrade.

2-1 LIMITATIONS OF USAGE

● Be sure to check the Electrical Specications. Ensure that this product

is compatible with the location's power supply, voltage, and frequency

requirements. A plate describing Electrical Specications is attached to the

product. Non-compliance with the Electrical Specications can cause a re and

electric shock.

● This product requires a breaker and earth mechanism as part of the location

facilities. Using the product without these can cause a re and electric shock.

● Ensure that the indoor wiring for the power supply is rated at 15 A or higher (AC

single phase 100 V ~ 120 V area), and 7 A or higher (AC 220 V ~ 240 V area).

Non-compliance with the Electrical Specications can cause a re and electric

shock.

● Be sure to use an independent power supply equipped with an earth leakage

breaker. Using a power supply without an earth leakage breaker can cause an

outbreak of re if a power surge occurs.

● Putting many loads on one electrical outlet can cause generation of heat and a

re resulting from overload.

● When using an extension cord, ensure that the cord is rated at 15 A or higher

(AC 100 V ~ 120 V area) and 7 A or higher (AC 220 V ~ 240 V area). Using a cord

rated lower than the specied rating can cause a re and electric shock.

PRECAUTIONS REGARDING PRODUCT OPERATION

To avoid injury and trouble, be sure to pay attention to the behavior of visitors and players.

PRECAUTIONS REGARDING PRODUCT OPERATION

3-1 BEFORE OPERATION

In order to avoid accidents, check the following before starting the operation:

● To ensure maximum safety for the players and the customers, ensure that where

the product is operated has sufcient lighting to allow any warnings to be read.

Operation under insufcient lighting can cause bodily contact with each other,

hitting accident, and/or trouble between customers.

● Be sure to perform appropriate adjustment of DLP projector. For operation of this

machine, do not leave monitor's ickering or deviation as is. Failure to observe

this can have a bad inuence upon the players' or the customers' physical

conditions.

● It is suggested to ensure a space allowing the players who feel sick while

playing the game to take a rest.

● Check if all of the adjusters are in contact with the surface. If they are not, the

cabinet can move and cause an accident.

Ensure that all of the adjusters are in contact with the oor.

Inhaltsverzeichnis

Andere Sega Arcade-Spielautomat Handbücher

Sega

Sega World Series Baseball Super Major League Bedienungsanleitung

Sega

Sega ATV Slam Bedienungsanleitung

Sega

Sega Crazy Taxi Bedienungsanleitung

Sega

Sega PRIMEVAL HUNT Bedienungsanleitung

Sega

Sega House Of The Dead 3 DELUXE Bedienungsanleitung

Sega

Sega BG-X005SGA Bedienungsanleitung

Sega

Sega NAOMI 2 Bedienungsanleitung

Sega

Sega OutRun2 Bedienungsanleitung

Sega

Sega Daytona Championship USA Bedienungsanleitung

Sega

Sega MIB Bedienungsanleitung

Sega

Sega Derby Owners Club World Edition Bedienungsanleitung

Sega

Sega 18 Wheeler Bedienungsanleitung

Sega

Sega Daytona USA Bedienungsanleitung

Sega

Sega UFO CATCHER Bedienungsanleitung

Sega

Sega Crazy Taxi High Roller Beilage

Sega

Sega Dinosaur King Bedienungsanleitung

Sega

Sega JUNGLE TREASURES Bedienungsanleitung

Sega

Sega Nascar Arcade Mini Standard Bedienungsanleitung

Sega

Sega Giant Plants vs Zombies The Last Stand Bedienungsanleitung

Sega

Sega MISSION IMPOSSIBLE ARCADE Anwendungshandbuch

Sega

Sega OUTRUN 2 SPECIAL TOURS SDX Bedienungsanleitung

Sega

Sega AFTER BURNER CLIMAX Bedienungsanleitung

Sega

Sega DRONE RACING GENESIS Bedienungsanleitung

Sega

Sega MARIO & SONIC AT THE OLYMPICS GAMES TOKYO... Bedienungsanleitung

Beliebte Arcade-Spielautomat Handbücher anderer Marken

Universal Space

Universal Space COCONUT BASH Bedienungsanleitung

Bay-Tek

Bay-Tek EVOLVE Bedienungsanleitung

Global VR

Global VR America's Army Montage- und Bedienungsanleitung

Atronic

Atronic Cashline Bedienungsanleitung

Universal Space

Universal Space Checky Monkey Bedienungsanleitung

Bay-Tek

Bay-Tek Skee Ball 1908 Alley Bedienungsanleitung

Aristocrat Technologies

Aristocrat Technologies Mars X Upright Bedienungsanleitung

Family Fun Companies

Family Fun Companies Reactor Kurzanleitung

Universal Space

Universal Space FRUIT MANIA Extreme Bedienungsanleitung

falgas

falgas CARRUSEL FIESTA Bedienungsanleitung

Konami

Konami DanceDanceRevolution Bedienungsanleitung

Bay-Tek

Bay-Tek quik drop Bedienungsanleitung

Bandai Namco

Bandai Namco PAC-MAN BATTLE ROYALE CHOMPIONSHIP DELUXE Bedienungsanleitung

Adrenaline

Adrenaline Flying Tickets Montage- und Bedienungsanleitung

Swinks

Swinks Stern Pinball Ghostbusters Bedienungsanleitung

Innovative Concepts in Entertainment

Innovative Concepts in Entertainment MONOPOLY ROLL-N-GO Bedienungsanleitung

jakar

jakar SPEED CARS Bedienungsanleitung

Carmelli

Carmelli HAT TRICK NG1015H Bedienungsanleitung