Sencor SVC 900 Bedienungsanleitung

Vacuum Cleaner 2 in 1 (bag & bagless)

User's manual

EN-1

SVC 900

Before rst use, please read all instructions contained in this user manual carefully, even if you are already familiar

with using similar products. Only use this product in accordance with the instructions described in the user manual.

Keep the user'smanual in a safe place where it can be easily retrieved for future use.

Save the original packaging, material, warranty card and proof of purchase receipt, at least for the duration of the

warranty policy. If you need to ship this product, pack it in the original cardboard box to ensure maximum protection

during shipping or transport (e.g., when moving or when you need to send this product for repair).

Translation of the original manual

EN-2

Vacuum Cleaner 2 in 1 (bag & bagless)

SVC 900

CONTENTS

IMPORTANT SAFETY NOTICE....................................................................................................................................................................... 3

PRODUCT DESCRIPTION ............................................................................................................................................................................... 5

ASSEMBLY ..........................................................................................................................................................................................................5

INSTRUCTIONS FOR USE ............................................................................................................................................................................... 6

STORAGE AND ACCESSORIES...................................................................................................................................................................... 7

CLEANING AND MAINTENANCE................................................................................................................................................................. 7

TROUBLESHOOTING.....................................................................................................................................................................................10

TECHNICAL SPECIFICATIONS.....................................................................................................................................................................10

PACKAGE CONTENTS....................................................................................................................................................................................11

INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED PACKAGING MATERIALS.................................12

DISPOSAL OF USED ELECTRICAL AND ELECTRONIC APPLIANCES ..............................................................................................12

Vacuum Cleaner 2 in 1 (bag & bagless)

SVC 900

EN-3

IMPORTANT SAFETY NOTICE

READ CAREFULLY AND STORE FOR FUTURE USE.

• This vacuum cleaner may be used by children 8 years of age

and older and by persons with physical or mental impairments

or by inexperienced persons, if they are properly supervised

or have been informed about how to use this vacuum cleaner

in a safe manner and understand the potential dangers.

Children must not play with the vacuum cleaner. Cleaning and

maintenance performed by the user must not be performed

by unsupervised children. Keep the vacuum cleaner and its

accessories out of reach of children that are younger than

8years of age.

• This vacuum cleaner is designed for use in households,

oces and similar types of areas. Do not use in industrial

surroundings.

• Do not expose the vacuum cleaner to direct sunlight and do

not place it near an open re or appliances that are asource of

heat.

• Before connecting the power cord to apower socket, check

that the technical details on the vacuum cleaner’srating label

match the electrical voltage in the socket.

• Make sure the power cord is not touching a hot surface or

sharp objects.

• Do not submerge the vacuum cleaner under water or any

other liquid and do not rinse it under running water.

• Before turning on the vacuum cleaner, make sure that the

dust bag is inserted inside and that the inow micro-lter and

the outow lter are installed in their place.

• When the vacuum cleaner is running, ensure that the air

outlets and the suction opening are not blocked.

EN-4

Vacuum Cleaner 2 in 1 (bag & bagless)

SVC 900

• Do not use the vacuum cleaner to vacuum the following items:

–

smouldering cigarettes, burning items, matches or embers;

– water and other liquids;

– ammable or volatile materials;

– sharp items, e.g. broken glass, needles, pins, etc.;

– our, wall plaster, cement and other building materials;

– larger pieces of paper or plastic bags, which can easily block

the suction opening.

• Vacuuming of some types of oors or oor surfaces can create

aelectrostatic discharge, which presents no danger to the user.

• Do not place the suction nozzle or tube against any parts of

the face.

• Always turn o the vacuum cleaner and disconnect it from

the power socket when leaving it without supervision, after

nishing using it and before cleaning it.

• Disconnect the power cord from the power socket by pulling

on the plug, never pulling on the cord. Otherwise, this could

damage the power cord or the socket. Hold the power cord in

your hand when winding it up.

• In the event that the power cord is damaged, it must be

replaced by an authorised service centre or by a similarly

qualied person, this will prevent the creation of adangerous

situation. It is forbidden to use the vacuum cleaner if it has

adamaged power cord.

• Do not use the vacuum cleaner if it is not working correctly, if

it has been damaged or has been submerged in water. Do not

repair the vacuum cleaner yourself or make any adjustments to

it. Have all repairs performed at an authorised service centre. By

tampering with the appliance, you risk voiding your legal rights

arising from unsatisfactory performance or quality warranty.

Vacuum Cleaner 2 in 1 (bag & bagless)

SVC 900

EN-5

PRODUCT DESCRIPTION

3qs

qg qh

1START/STOP button

2handle

3cable winding button

4motor output control

5front cover

6air suction opening

7full bag indicator

8chassis

9grill of the inow H.E.P.A. lter

0parking position

qa wheel

qs power cable

qd combination nozzle

qf telescopic tube

qg hose

qh oor inlet nozzle

ASSEMBLY

Insert the hose into the air suction opening

Press both the safety buttons on the end of the hose end and insert the hose end into the air suction opening on

the vacuum cleaner until you hear a "click". The hose is now secured in the correct position.

Attach the holder to the telescopic tube

Make sure to install the holder on the wider part of the telescopic tube.

EN-6

Vacuum Cleaner 2 in 1 (bag & bagless)

SVC 900

Attach the oor inlet nozzle to the telescopic tube

Make sure the oor nozzle is attached the narrower part of the telescopic tube.

Adjust the length of the telescopic tube

Adjust the length of the telescopic tube as follow: Move and hold the button on the tube forward as shown by

arrows and adjust the length of the tube as needed. Release the button and move the tube slightly forward until

you hear a "click". The telescopic tube is now securely xed in position.

Select the type of dust container

It is possible to use this vacuum cleaner both with and without bags. Choose your preferred vacuuming mode and

depending on that insert either a dust container (pic. 1) or a dust bag (pic. 2).

picture 1 picture 2

Note:

When using the dust bag do not forget to insert the supplied plastic foam lter into the grooves in

front of the motor.

INSTRUCTIONS FOR USE

Connecting your vacuum cleaner to the electrical power network

Pull the plug attached to the power cord out from the vacuum cleaner until the desired length of the cable is out of

the appliance. Insert the plug to the wall outlet.

Caution:

Yellow marking on the supply cable warns that the cable is close to its end. Do not pull the cable

more than to the red marking.

Adjusting the oor inlet nozzle according to the oor surface.

You may set the inlet nozzle according to the oor surface by adjusting the inlet ap:

• If you want to vacuum carpets, close the bristles of the inlet inside the inlet nozzle, by turning the ap

accordingly.

Vacuum Cleaner 2 in 1 (bag & bagless)

SVC 900

EN-7

• If you want to vacuum hard and smooth surface, move the bristles out of the nozzle, by turning the ap

accordingly.

Turning your vacuum cleaner on and o

To switch your machine on or o, press the START / STOP button on the vacuum cleaner body.

Adjusting the suction strength

The suction strength may be adjusted by moving the rider on the vacuum cleaner body (small range) or by the

moveable rider on the hose handler.

Tip:

If the hose holder becomes blocked when vacuuming, disconnect it from the telescopic tube and also

disconnect the hose from the vacuum cleaner body. Then place the holder inside the suction hole on

the vacuum cleaner body and vacuum the stuck dirt out.

Temporary interruption of the vacuuming process

If you want to temporarily stop the vacuuming process, place the telescopic tube using the notches on the oor

hose into one of the parking positions - at the back or bottom of the vacuum cleaner.

Caution:

Do not move the appliance from place to place if the hose is in the parking position! You may

brake o the parking position holder!

Using your accessories

A combination nozzle is located In the bottom part of the vacuum cleaner:

• When in the standard setting you can use it as a slit nozzle for vacuuming hard to reach places (e.g. windows,

corners, bookshelves, area between mattresses, upholstery, etc.).

• By extending the brush you can use it as a pillow hose (e.g. vacuuming of beds, upholstery, etc.).

Ending the vacuuming process

When you nish vacuuming, switch the vacuum cleaner o by pressing the START/STOP button and then

disconnect the supply cable plug from the socket.

To wind the power cord back to the vacuum cleaner, press and hold the winding button with one hand. Hold the

cable with your other hand to protect the vacuum cleaner input area from damage.

Tip:

If the winding process stops and part of the power cord is still outside, release the winding button and

pull the cable out again by about 50cm and press the winding button again and repeat the winding

process.

Carrying your vacuum cleaner

If you need to carry the vacuum cleaner, hold it only by the handle.

STORAGE AND ACCESSORIES

Before storage you may disassemble your vacuum cleaner into its individual parts or you may store it assembled

with the telescopic tube stored in one of the "parking" positions (the rear or bottom position).

CLEANING AND MAINTENANCE

Caution:

Before cleaning disconnect this product from the power source.

EN-8

Vacuum Cleaner 2 in 1 (bag & bagless)

SVC 900

Changing the dust bag

If while the suction hose is lifted above the vacuumed area and the power is set to maximum and the indicator

seen through the clear window shows "full" (full colour in the indicator) then it is necessary to replace the dust bag:

1) Open the vacuum cleaner cover.

2) Remove the old dust bag.

3) Insert a new one in the same position.

4) Close the vacuum cleaner cover.

Caution:

Never attempt to wash paper bags as they are single use only and once full are to be disposed of

together with household waste. It is only possible to wash textile bags!

Emptying the dust container

1) Disconnect the hose from the vacuum cleaner.

2) Open the vacuum cleaner cover and remove the dust container by pulling it up with its handle.

3) Place the dust container above a waste bin.

4) Press the safety lock and open the bottom lid of the container.

5) Dust and dirt may be put in regular household waste.

6) Then by turning remove the H.E.P.A. lter from the container and tip out the remaining dust and dirt.

7) Insert the H.E.P.A. lter back into the container and turn it to lock it into position.

8) Close the bottom lid of the container. Make sure the safety lock button is engaged.

9) Place the dust container back into the vacuum cleaner.

Tip:

We recommend washing the dust container and the dust lter under running, lukewarm water.

Caution:

Before installing the dust container and the dust lter back into your appliance, make sure that

both the container and the lter are completely dry.

Vacuum Cleaner 2 in 1 (bag & bagless)

SVC 900

EN-9

Replacing the inlet foam lter

Note:

The input plastic foam lter is only used when using the mode with the dust bag! When not

using the dust bag a dust container is inserted in the grooves in front of the motor and so it is not

possible to use a lter.

The input plastic foam lter is only used when using the mode with the dust bag! When not using the dust bag

a dust container is inserted in the grooves in front of the motor and so it is not possible to use a lter.

1) Open the vacuum cleaner cover and take out the frame with the inow lter.

2) Replace the inow plastic foam lter with a new one a together with the frame put it back into the vacuum

cleaner. Ensure that the ribbing of the lter frame always faces outwards and that the black foam part of the

lter faces outwards also.

Replacement of the inow H.E.P.A. lter

1) Disconnect the hose from the vacuum cleaner.

2) Open the vacuum cleaner cover and remove the dust container by pulling it up with its handle.

3) Press the safety lock and open the bottom lid of the container.

4) By turning remove the H.E.P.A. lter from the container and replace with a new one.

5) Insert the H.E.P.A. lter back into the container and turn it to lock it into position.

6) Close the bottom lid of the container. Make sure the safety lock button is engaged.

7) Place the dust container back into the vacuum cleaner.

Replacement of the outow H.E.P.A. lter

1) Press the safety lock to open the frame of the outow lter.

2) Replace the outow lter together with its plastic frame.

3) Replace the plastic foam lter with a new one a together with the frame put it back into the vacuum cleaner.

Ensure that the black foam always faces into the vacuum cleaner and the white foam outwards.This will ensure

that at the outow the rough particles will be ltered out before the ne particles.

To clean the outer parts of the vacuum cleaner, use a soft cloth dipped in lukewarm water. Do not use harsh

cleaning uids, paint thinners or solvents. These can damage the surface of the appliance.

EN-10

Vacuum Cleaner 2 in 1 (bag & bagless)

SVC 900

TROUBLESHOOTING

Before you decide to contact authorized service centre, read these following tips in the troubleshooting chart:

Problem Possible cause Recommended action

The engine will not start. - The supply cable is not connected

correctly in the wall power outlet.

- The wall power outlet is damaged.

- The vacuum cleaner is not switched on.

- Insert the plug rmly into the

power outlet.

- Inspect the power outlet.

- Turn the appliance on.

The suction output is

insucient.

- The appliance is blocked.

- The dust lter needs cleaning.

- The dust container is inserted in the

wrong position.

- Filter is clogged.

- Remove the clogging or foreign

object.

- Clean the dust lter.

- Close the dust container.

- Clean the lter.

The power cord is not

wound in completely.

The power cord may have slipped down

from the winding pulley during winding.

Hold the power cord during the

winding. Apply slight tension (by

pulling the power cord back) to

the power cord during the winding

process.

The cable cannot be pulled

out.

The cable is wound up incorrectly. Press the winding button and try to

rewind the power cord again.

The output control does

not function.

The appliance has broken down. Have the vacuum cleaner repaired by

technician

(only by qualied technician).

The power cord starts to

wind in when you do not

require it to do so.

The winding mechanism has broken down. Have the vacuum cleaner repaired by

technician

(only by qualied technician).

The dust container cannot

be closed.

The dust lter is inserted incorrectly or in an

incorrect position.

Reinstall and secure the lter in

position and try again.

TECHNICAL SPECIFICATIONS

Rated voltage ..................................................................220–240 VAC (alternate current)

Nominal frequency ....................................................................................50–60 Hz

Rated power .............................................................................................700 W

Electric shock protection class .................................................................................II

Noise level .............................................................................................78 dB(A)

Length of power cord ........................................................................................5 m

Operational range ........................................................................................7.5 m

Weight ...................................................................................................5.6 kg

The declared noise emission level of the appliance is 78dB(A), which represents alevel Aof acoustic power with

respect to areference acoustic power of 1pW.

Andere Handbücher für SVC 900

Inhaltsverzeichnis

Andere Sencor Staubsauger Handbücher

Sencor

Sencor SVC 8668AT Reparaturanleitung

Sencor

Sencor SVC 45BL-EUE3 Bedienungsanleitung

Sencor

Sencor SVC 7550TI 4AAAA ECO POWER Betriebsanleitung

Sencor

Sencor SVC 7PE Bedienungsanleitung

Sencor

Sencor SVC 510GR Bedienungsanleitung

Sencor

Sencor SVC 45BK Bedienungsanleitung

Sencor

Sencor SRV 2230TI Betriebsanleitung

Sencor

Sencor SRV 8550BK Reparaturanleitung

Sencor

Sencor SVC 0825WH Bedienungsanleitung

Sencor

Sencor SVC 7550TI 4AAAA ECO POWER Bedienungsanleitung

Sencor

Sencor SRV 9350WH Bedienungsanleitung

Sencor

Sencor SVC 45BK-EUE3 Bedienungsanleitung

Sencor

Sencor SVC 8725GD Bedienungsanleitung

Sencor

Sencor SVC 9020BK Bedienungsanleitung

Sencor

Sencor SVC 7550TI 4AAAA ECO POWER Betriebsanleitung

Sencor

Sencor SVC 735 Bedienungsanleitung

Sencor

Sencor SVC 8825TI Betriebsanleitung

Sencor

Sencor SVC 660SL Bedienungsanleitung

Sencor

Sencor SVC 7550TI 4AAAA ECO POWER Betriebsanleitung

Sencor

Sencor SVC 1035TQ 3AAA Reparaturanleitung

Sencor

Sencor SVC 840RD Bedienungsanleitung

Sencor

Sencor SVC 840RD Bedienungsanleitung

Sencor

Sencor SVC 1040SL Bedienungsanleitung

Sencor

Sencor SVX 110TB Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

Exido

Exido 240-114 Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Shark

Shark ROTATOR PRO COMPLETE NV550 Series Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung