6
General safety instructions
The SENECT pressure sensor EDS is an electronic sensor unit for measuring the pressure in
pipelines, hoses or vessels.
As this is an electronic product, the usual requirements, as with all electrical
appliances, must be met. The device may only be operated with compatible
control units or control units approved by SENECT. The device and all
connected lines must be installed and operated protected from moisture
and wetness. When laying all cables, care must be taken that no safety-
relevant impairments such as tripping hazards occur. For many applications,
fuse protection by a residual current circuit breaker with a tripping current
< 30 mA is mandatory. Find out more about this.
The device must be installed protected from overheating by direct sunlight and must only
be operated at an ambient temperature between 0°C and +40°C. The device must not be
modified, except for extensions or software updates of SENECT®. It is forbidden to open
the device or to penetrate the inside of the housing in any way.
The pressure sensor EDS is not intended to be used by persons (including children) with
limited physical, sensory or mental abilities or for lack of experience and/or knowledge,
unless they are supervised or instructed by a person responsible for their safety on how
to operate the device. Please keep these instructions for use as a reference. Technical and
optical changes as well as printing errors reserved.
