Shark NV22 Bedienungsanleitung

Owner’s Guide

Manual del usuario

Guide d’utilisation

NV22 |NV22C |NV22L

NV22LC |NV22P |NV22T

NV22Q |NV22W

English

Contents

Thank you for

purchasing the

Shark®Upright

Vacuum.

Important Safety Instructions 2

Getting Started 4

Using the Vacuum 6

Transporting the Vacuum 7

Cleaning with the Vacuum Accessories 8

Emptying the Dust Cup Assembly 10

Proper Care of Your Shark®Upright Vacuum 11

Troubleshooting 12

Checking for Blockages 13

Maintenance 14

Warranty and Registration 16

www.sharkvac.com 1

TOLL FREE: 1-800 798-7398

2TOLL FREE: 1-800-798-7398

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS For Household Use Only

General Electrical Safety:

Unplug from electrical outlet when not in use and before servicing.

DO NOT use vacuum with a damaged cord or plug.

DO NOT pull or carry vacuum by the cord.

DO NOT unplug by pulling on cord; to unplug, grasp the plug, not the cord.

DO NOT handle plug or vacuum cleaner with wet hands.

DO NOT run the vacuum over the power cord.

DO NOT use the cord as a handle.

DO NOT close a door on the cord.

DO NOT pull cord around sharp corners.

DO NOT leave appliance when plugged in.

Keep cord away from heated surfaces.

Turn off all controls before plugging or unplugging vacuum cleaner.

Hose Attachments:

DO NOT use if air ﬂow is restricted; if the air paths, the hose or the extension

tube become blocked, turn the vacuum cleaner off. Remove all obstructions

before you turn on the unit again.

Keep the end of the hose, wands and other openings away from face and body.

Keep rotating brush and suction openings away from hair, face, ﬁngers,

uncovered feet or loose clothing.

Only use manufacturer’s recommended attachments.

General Use:

Use only as described in this manual.

DO NOT put any objects into openings.

Keep your work area well lit.

Keep the vacuum moving over the carpet surface at all times to avoid damaging

the carpet ﬁbers.

DO NOT place vacuum on unstable surfaces such as chairs or tables.

DO NOT allow young children to operate the vacuum or use as a toy.

DO NOT use vacuum cleaner if it has been dropped, damaged, left outdoors or

submerged in water. Return to EURO-PRO Operating LLC for examination, repair

or adjustment.

When using an electrical appliance, basic

safety precautions should always be

observed, including the following:

READ ALL INSTRUCTIONS BEFORE

USING YOUR SHARK®UPRIGHT

VACUUM.

WARNING:

To reduce the risk of electric shock,

the two-pronged power cord plug

is polarized [one prong is larger

than the other]; it will ﬁt into the

outlet only one way. DO NOT

force into outlet or try to modify

to ﬁt.

WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK OR INJURY.

DO NOT USE OUTDOORS OR ON WET SURFACES:

3www.sharkvac.com

English

Cyclonic Chamber/Dust Cup/Filters:

Before turning on the vacuum:

• Make sure that dust cup, cyclonic chamber and all ﬁlters are in place after

routine maintenance.

• Make sure that all components and ﬁlters are thoroughly dry after routine

cleaning.

• Only use ﬁlters and accessories provided by EURO-PRO Operating LLC

[Failure to do so will void the warranty.]

General Cleaning:

DO NOT run the vacuum over large-sized objects.

DO NOT pick up hard or sharp objects such as glass, nails, screws or coins that

could damage the vacuum cleaner.

DO NOT pick up smoking or burning objects such as hot coals, cigarette butts or

matches.

DO NOT pick up ﬂammable or combustible materials such as lighter ﬂuid,

gasoline, kerosene or use in areas where they may be present.

DO NOT pick up toxic solutions such as chlorine bleach, ammonia or drain

cleaner.

DO NOT use in an enclosed space where vapors are present from paint, paint

thinner, moth-prooﬁng substances, ﬂammable dust or other explosive or toxic

materials.

DO NOT vacuum up any liquids.

DO NOT immerse vacuum cleaner in water or other liquids.

DO NOT use outdoors or on wet surfaces; use only on dry surfaces.

Use extra care when cleaning on stairs.

4TOLL FREE: 1-800-798-7398

Along with your upright unit, you will ﬁnd the

following components:

aHandle Assembly

bCleaning Attachments

cExtra Filters

dSuper Stretch Hose

eFloor Power Nozzle

fVacuum Body

gCleaning Wand

Note: models NV22C, NV22L, NV22LC, NV22P,

NV22T, NV22Q and NV22W include the optional Pet

Hair Power Brush (

). NV22L, NV22P, NV22T, NV22Q,

and NV22W include the optional extra 24" crevice tool

(

). NV22Q includes the optional extra 10’ strech hose

(

).These tools can be stored in separate accessory bag.

Optional tools are available for sale for any NV22

model: 1-800-798-7398.

Your Shark®Upright is easy

to assemble:

1Lay your vacuum body on a level

surface.

2Slide the electrical connection from

the power nozzle into the main body

to click into place.

3Connect the hose from the main

body to the power nozzle; push with

a slight turning motion to create

a snug ﬁt.

4Slide the handle assembly into the

upright unit aligning the hose hook

on the handle assembly with the

power cord hooks on the back of

the unit.

5Secure the handle assembly in place

with included nut/bolt (shipped

attached to handle assembly).

6Place the vacuum in the upright

position.

7Store the Crevice Tool, Dusting

Brush and Cleaning Wand on

the unit.

Getting Started

5www.sharkvac.com

English

8Attach the Super Stretch Hose:

a) Snap hose into swivel connector

b) Route under anti-tip hook

c) Route over upper hose holder

d) Press securely onto cleaning wand

IMPORTANT:

To prevent vacuum

from tipping, secure

hose under the

anti-tip hose hook.

IMPORTANT:

For suction to reach the Floor Power

Nozzle, the Cleaning Wand and

Super Stretch Hose must be attached

securely on the vacuum body.

9When storing your vacuum, wind

cord around the two cord holders

and secure with cord clip:

•Quick Cord release at the top of

the unit – place in the upright

position.

•Second holder near the base –

turn until it is pointing down.

To release the cord, turn the Quick

Cord release to the left or right.

6TOLL FREE: 1-800-798-7398

Carpets

Bare Floors / Tools

Off

Using the Vacuum

1Start with the Power Switch in the

“OOff” position.

2Place your foot on the Floor Power

Nozzle and pull handle towards you.

3Set the Power Switch to desired

cleaning setting.

Your Shark®Upright Vacuum is a versatile

tool that can be used to clean bare ﬂoor

surfaces or carpets – with the click of

a switch.

Stand the vacuum into the upright position.

Plug in the vacuum.

4When cleaning bare ﬂoors:

Select the “IOn” position for

suction only cleaning to avoid

scattering dirt while cleaning.

When cleaning carpets:

Ensure you have pulled the handle

towards you and select the

“II Brush Roll On” position to

agitate the carpet ﬁbers for

deeper cleaning performance.

IMPORTANT: To protect your

carpets, the Brush Roll will only turn

on when you have pulled the handle

towards you and released the Floor

Power Nozzle.

7www.sharkvac.com

English

Indicator Light

Transporting the Vacuum

IMPORTANT: Your Brush Roll

Indicator Light will illuminate solid

green when brush roll is on,

or solid red if there is a

blockage. This feature is designed

to protect your Lifetime Belt that

powers your Brush Roll. See

Checking for Blockages

on page 13.

NOTE: The height of your power

nozzle has been optimized for easy

pushing and superior cleaning on

all ﬂoor types, so there is no need

to make any height adjustments

as you transition to different ﬂoor

& carpet types.

1To roll the vacuum:

Hold the handle from either

direction, and tilt unit back

on wheels.

2To carry the vacuum:

With the unit in the standing

position, lift by the Dust Cup

Assembly Handle (carry handle).

CAUTION:

When lifting or carrying,

DO NOT press Dust Cup

Assembly release button.

Stand the vacuum into the upright position.

Unplug the vacuum.

Wind cord around the two cord holders.

Secure Super Stretch Hose in place.

8TOLL FREE: 1-800-798-7398

Cleaning with the Vacuum Accessories

Before cleaning with your accessories:

Stand vacuum into upright position.

Secure Super Stretch Hose in the

anti-tip hose hook to prevent tipping.

Select the “IOn” position for

suction only cleaning.

DO NOT pull vacuum cleaner

around by the hose.

DO NOT overextend the hose.

Vacuum Accessories

Your vacuum comes with a Super Stretch

Hose and Cleaning Wand. Use one or

the other to attach your cleaning

accessories.

Crevice Tool – this tool is used for

cleaning between cushions, under

radiators and baseboards, or hard-

to-reach crevices and corners.

Dusting Brush – this tool is used to dust a variety of surfaces from

furniture and window blinds to lamp shades and book shelves, as well

as remove dirt and pet hair from upholstery surfaces and stairs.

Note: for model NV22Q, your Shark

comes with an extra

10’ stretch hose, that can attach directly to the on board hose.

1Using the Super Stretch Hose:

Stand the vacuum into upright

position.

Remove the hose from the

Cleaning Wand.

Push the selected tool into the

hose connector.

IMPORTANT:

To prevent vacuum

from tipping, secure

hose under the

anti-tip hose hook.

9www.sharkvac.com

English

2Using the Cleaning Wand:

Stand the vacuum into upright

position.

Remove the Cleaning Wand (with

hose attached) from the unit.

Push the selected tool into the end

of the Cleaning Wand.

Note: for models NV22C / NV22P / NV22L / NV22LC / NV22T / NV22Q / NV22W, your

Shark

comes with a Pet Hair Power Brush that is kept in a separate accessory bag.

Pet Hair Power Brush – this unique tool has dual felt strips

along the cleaning surface that are designed for heavy-duty pet

hair removal from carpeted stairs and upholstery.

Note: for model NV22L / NV22P / NV22T / NV22Q / NV22W, your Shark

comes with

an extra 24” crevice tool.

24” Crevice Tool – allows you to reach deep into

narrow cleaning spaces.

To order additional parts and accessories, go to www.sharkvac.com or call

1-800-798-7398.

Note: some parts may be available at your local Shark

retailer.

Andere Handbücher für NV22

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Shark Staubsauger Handbücher

Shark

Shark HYDROVAC WD100 Series Bedienungsanleitung

Shark

Shark ION Rocket IR100 Series Bedienungsanleitung

Shark

Shark ROTATOR NV500 SERIES Bedienungsanleitung

Shark

Shark NV22 Bedienungsanleitung

Shark

Shark Rocket IX160 Series Bedienungsanleitung

Shark

Shark WANDVAC WV406ANZ Bedienungsanleitung

Shark

Shark LIFT-AWAY PRO Bedienungsanleitung

Shark

Shark UV900 Series Bedienungsanleitung

Shark

Shark CORD-FREE ULTRA-LIGHT X30 Bedienungsanleitung

Shark

Shark NV353Q Series Bedienungsanleitung

Shark

Shark Navigator LIFT-AWAY ADV LA300C Series Bedienungsanleitung

Shark

Shark NINJA STRATOS IZ400UK Series Bedienungsanleitung

Shark

Shark NV22 Bedienungsanleitung

Shark

Shark ZERO-M Navigator Pet Pro Bedienungsanleitung

Shark

Shark NV22LWM Bedienungsanleitung

Shark

Shark VERTEX AZ1800 Series Bedienungsanleitung

Shark

Shark Rocket IX141 Bedienungsanleitung

Shark

Shark EP750M Kurzanleitung

Shark

Shark QU202Q Bedienungsanleitung

Shark

Shark NV350UKC Bedienungsanleitung

Shark

Shark Performance Lift-Away ADV UV850 Series Bedienungsanleitung

Shark

Shark Navigator NV22UKL Bedienungsanleitung

Shark

Shark ROTATOR NV95 Series Bedienungsanleitung

Shark

Shark ION RV761 Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

Exido

Exido 240-114 Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung

Nobles

Nobles 608669 Produkthandbuch