Shark NV41 Bedienungsanleitung

NV41

NV42

www.sharkclean.com

Owner’s Guide

Manual de

Instrucciones

TOLL FREE: 1-800-798-7398

This manual covers model numbers:

NV41

NV42

TECHNICAL SPECIFICATIONS

Voltage: 120V.

Watts: 1200W

Amps: 10A

Hertz: 60Hz

1www.sharkclean.com

English

Contents

Important Safety Instructions 2

Getting Started 4

Using the Vacuum 6

Cleaning with the Vacuum Accessories 7

Emptying the Dust Cup Assembly 8

Proper Care of Your Vacuum 9

Troubleshooting 10

Checking for Blockages 11

Maintenance 12

Warranty and Registration 13

Thank you for

purchasing

the Shark

Navigator®

Deluxe Upright

Vacuum.

2TOLL FREE: 1-800-798-7398

IMPORTANT SAFETY INSTRUCTIONS

PLEASE READ CAREFULLY BEFORE USE • FOR HOUSEHOLD USE ONLY

WARNING

To reduce the risk of injury, ﬁre, electric shock, and property damage

resulting from improper use of the appliance, carefully observe the

following instructions. This unit contains electrical connections and

moving parts that potentially present risk to the user.

THE POWER NOZZLE, WAND,

AND HANDLE CONTAIN

ELECTRICAL CONNECTIONS:

• These are not serviceable parts.

• Do not use to vacuum any liquids.

• Do not immerse in water.

•

If handle/wand is damaged, discontinue

use.

1Inspect power cord and plug for any

damage before use. DO NOT use

vacuum cleaner with a damaged cord

or plug. Turn off all controls before

plugging in or unplugging the vacuum

cleaner. Store your vacuum cleaner

with the power cord secured around

the two cord hooks.

2 DO NOT use outdoors or on wet

surfaces. Use only on dry surfaces.

3Unplug from electrical outlet when not

in use and before servicing.

4If vacuum cleaner is not working

as it should, or has been dropped,

damaged, left outdoors, or dropped

into water, return it to SharkNinja

Operating LLC for examination, repair,

or adjustment.

5The hose contains electrical wires.

DO NOT use when damaged, cut, or

punctured.

6DO NOT pull or carry vacuum cleaner

by the cord or use the cord as a

handle.

7DO NOT unplug by pulling on cord.

Grasp the plug, not the cord.

8DO NOT handle plug or vacuum

cleaner with wet hands.

9DO NOT run the vacuum cleaner over

the power cord, close a door on the

cord, or pull the cord around sharp

corners.

10 The use of an extension cord is NOT

recommended.

11 DO NOT leave vacuum cleaner

unattended when plugged in.

12 Keep cord away from heated

surfaces.

Always turn off the vacuum cleaner

before connecting or disconnecting

motorized nozzle.

GENERAL USE

14 Use only as described in this manual.

1 5 Keep your work area well lit.

16 Keep the vacuum cleaner moving over

the carpet surface at all times to avoid

damaging the carpet ﬁbers.

17 DO NOT place vacuum cleaner on

unstable surfaces such as chairs or

tables.

18 DO NOT put any objects into

openings. DO NOT use with any

opening blocked; keep free of dust,

lint, hair, and anything that may

reduce airﬂow.

3www.sharkclean.com

English

19 DO NOT allow the appliance to be

used by children. Close supervision is

necessary when used near children.

This is not a toy.

20 DO NOT use without dust cup and/or

ﬁlters in place.

DUST CUP/FILTERS/ACCESSORIES

Before turning on the vacuum:

21 Make sure that all ﬁlters are thoroughly

dry after routine cleaning.

22 Make sure that dust cup and all ﬁlters

are in place after routine maintenance.

23 Make sure accessories are free of

blockages.

24 Only use Shark®-brand ﬁlters and

accessories (failure to do so will void

thewarranty).

HOSE ATTACHMENTS

25 DO NOT use if airﬂow is restricted.

If the air paths or the motorized

ﬂoor nozzle become blocked, turn

the vacuum cleaner off and unplug

from electrical outlet. Remove all

obstructions before you turn on the

unitagain.

26 Keep the end of the hose and

accessory openings away from face

and body.

27 Keep cleaning tools and hose suction

openings away from hair, face, ﬁngers,

uncovered feet, or loose clothing.

2 8 Only use manufacturer’s

recommended attachments.

GENERAL CLEANING

29 DO NOT vacuum up large objects.

30 DO NOT vacuum up hard or sharp

objects such as glass, nails, screws, or

coins that could damage the vacuum

cleaner.

31 DO NOT vacuum up drywall dust,

ﬁreplace ash, or embers. DO NOT use

as an attachment to power tools for

dust collection.

32 DO NOT vacuum up smoking or

burning objects such as hot coals,

cigarette butts, or matches.

33 DO NOT vacuum up ﬂammable or

combustible materials (e.g., lighter

ﬂuid, gasoline, or kerosene) or use

vacuum in areas where they may be

present.

34 DO NOT

vacuum

up toxic solutions

(e.g., chlorine bleach, ammonia, or

drain cleaner).

35 DO NOT use in an enclosed space

where vapors are present from

paint, paint thinner, moth-prooﬁng

substances, ﬂammable dust, or other

explosive or toxic materials.

36 DO NOT vacuum up any liquids.

37 DO NOT immerse vacuum cleaner in

water or other liquids.

38 Use extra care when cleaning on

stairs.

POLARIZED PLUG

To reduce the risk of electric shock, this

vacuum cleaner has a polarized plug (one

blade is wider than the other). As a safety

feature, this plug will ﬁt into a polarized

outlet only one way. If the plug does not

ﬁt fully into the outlet, reverse the plug.

If it still does not ﬁt, contact a qualiﬁed

electrician. DO NOT force into outlet or try

to modify to ﬁt.

SAVE THESE INSTRUCTIONS

4TOLL FREE: 1-800-798-7398

Along with your upright unit, you

will ﬁnd the following components:

aVacuum Body

bMotorized Floor Brush

cHandle Assembly

dSuper Stretch Hose

eCleaning Wand

fPet Upholstery Tool

gCleaning Attachments

Getting Started

Your Shark Navigator®Upright

is easy to assemble:

1Lay your vacuum body on a

level surface.

2Slide the electrical connection

from the motorized ﬂoor brush

into the main body to click into

place.

3Connect the hose from the

main body to the motorized

ﬂoor brush; push with a slight

turning motion to create a snug

ﬁt.

4Slide the handle assembly

into the upright unit aligning

the hose hook on the handle

assembly with the power cord

hooks on the back of the unit.

5Secure the handle assembly in

place with the included bolt.

6Place the vacuum in the upright

position.

7Store the Crevice Tool, Dusting

Brush and Cleaning Wand on

the unit.

a c e*

5www.sharkclean.com

English

9When storing your vacuum,

wind cord around the two cord

holders and secure with cord

clip:

• Quick Cord release at the

top of the unit – place in the

upright position.

• Second holder near the

base – turn until it is pointing

down.

To release the cord, turn the Quick

Cord release to the left or right.

IMPORTANT:

For suction to reach the

Motorized Floor Brush, the

Cleaning Wand and Super

Stretch Hose must be attached

securely on the vacuum body.

10 To carry the vacuum:

With the unit in the standing

position, lift by the Dust Cup

Assembly Handle (carry handle).

CAUTION: When lifting or

carrying, DO NOT press Dust

Cup Assembly release button.

8Attach the Super Stretch Hose:

a) Snap hose into swivel

connector

b) Route under anti-tip hook

c) Route over upper hose

holder

d) Press securely onto cleaning

wand

IMPORTANT:

To prevent vacuum from

tipping, secure hose under the

anti-tip hose hook.

8 9

6TOLL FREE: 1-800-798-7398

Using the Vacuum

Your Shark Navigator®Upright

Vacuum is a versatile tool that

can be used to clean bare ﬂoor

surfaces or carpets – with the click

of a switch.

Stand the vacuum into the upright

position.

Plug in the vacuum.

1Start with the Power Switch in

the “O Off” position.

2Place your foot on the motorized

ﬂoor brush and pull handle

towards you.

3Set the Power Switch to desired

cleaning setting.

4When cleaning bare ﬂoors:

Select the “I On” position for

suction only cleaning to avoid

scattering dirt while cleaning.

When cleaning carpets:

Ensure you have pulled the

handle towards you and select

the “II Brush Roll On” position

to agitate the carpet ﬁbers for

deeper cleaning performance.

5Due to the huge suction

power of this vacuum, it

may become necessary to

adjust the suction release

on the hose. If the vacuum

is difﬁcult to push or pull or

if it is lifting up area rugs,

adjust the suction release by

opening or closing the valve

at the top end of the hose.

IMPORTANT:

To protect your carpets, the

Brush Roll will only turn on when

you have pulled the handle back

towards you and released the

Motorized Floor Brush.

IMPORTANT:

Your Brush Roll Indicator Light

will illuminate solid green when

brush roll is on, or solid red if

there is a blockage. This feature

is designed to protect your

Lifetime Belt that powers your

Brush Roll. See Checking for

Blockages on page 11.

NOTE: The height of your

Motorized Floor Brush has been

optimized for easy pushing and

superior cleaning on all ﬂoor

types, so there is no need to

make any height adjustments as

you transition to different ﬂoor &

carpet types.

OFF

Bare Floors /

Tools

Carpets

Suction Release

Release suction for

easier push and pull

on high pile carpets

and area rugs.

7www.sharkclean.com

English

Cleaning with the Vacuum Accessories

Before cleaning with your

accessories:

Stand vacuum into upright position.

Secure Super

Stretch Hose in

the anti-tip hose

hook to prevent

tipping.

Select the “I On” position for

suction only cleaning.

DO NOT pull vacuum cleaner

around by the hose.

DO NOT overextend the hose.

Vacuum Accessories

Your vacuum comes with a Super

Stretch Hose and Cleaning Wand.

Use one or the other to attach your

cleaning accessories.

1Using the Super Stretch Hose:

Stand the vacuum into upright

position.

Remove the hose from the

Cleaning Wand.

Push the selected tool into the

hose connector.

2Using the Cleaning Wand:

Stand the vacuum into upright

position.

Remove the Cleaning Wand

(with hose attached) from the

unit.

Push the selected tool into the

end of the Cleaning Wand.

3Pet Upholstery Tool

4Dusting Brush

5Crevice Tool

To order additional parts and accessories,

go to www.sharkclean.com or call

1-800-798-7398.

8TOLL FREE: 1-800-798-7398

Emptying the Dust Cup Assembly

For best results empty the Dust Cup

Assembly after each use; empty

several times during prolonged

usage.

Or empty the Dust Cup Assembly

when it reaches the MAX ﬁll line;

NEVER OVER-FILL THE DUST

CUP.

Stand vacuum into upright position.

Turn vacuum off.

For proper care, consult the table

to the right for the maintenance

schedule of your Cyclonic Chamber

and Filters.

Lock vacuum into upright position.

Turn vacuum off.

Remove Dust Cup Assembly.

To empty the Dust Cup Assembly:

1Grip carry handle and press

the Dust Cup release button to

remove Dust Cup Assembly

2Option A: for Quick Empty:

Insert Dust Cup Assembly deep

inside trash receptacle to contain

dust and debris.

Press the Dust Cup Door release

button; tap container gently to

dislodge and release dust and

debris.

Snap door in place.

Important: If the Dust Cup

Door does not swing open after

pressing the release button,

push the door open using the

bottom door tabs.

CAUTION:

Unplug the vacuum;

failure to do so might

result in electric shock.

3Option B: For Allergy Sufferers:

Wrap a trash bag around the

Dust Cup Assembly leaving

space at the bottom for the door

to swing open.

Locate the Dust Cup Door

release button within the trash

bag and press to release as you

shake the dust cup to empty

dust and debris.

Snap the bottom door in place.

Note: Option B can also be

performed outside of the home

to further minimize releasing

dust back into the air. Carry just

the Dust Cup Assembly and trash

bag outside.

Note: Some dust and debris

may remain in the top of your

dust cup assembly on or near

the metal screen. It is not

necessary to completely remove

this material before continuing

to vacuum; Shark®advanced

cyclonic action will sweep the

metal screen clean once you

begin to reﬁll your dust cup.

1 2 3

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere Shark Staubsauger Handbücher

Shark

Shark Rotator uv560 Bedienungsanleitung

Shark

Shark Rocket HV301Q Series Bedienungsanleitung

Shark

Shark Shark NV70 Bedienungsanleitung

Shark

Shark ROTATOR SLIM-LIGHT Lift-Away NV340UKP Bedienungsanleitung

Shark

Shark SONIC DUO KD450RW Bedienungsanleitung

Shark

Shark SV1100UKJR Bedienungsanleitung

Shark

Shark VERTEX QS2000Q Series Bedienungsanleitung

Shark

Shark Rocket IZ340 Series Bedienungsanleitung

Shark

Shark NV105 Bedienungsanleitung

Shark

Shark 900S Bedienungsanleitung

Shark

Shark SK410 series Bedienungsanleitung

Shark

Shark NP319 40 Bedienungsanleitung

Shark

Shark SV775R Bedienungsanleitung

Shark

Shark DuoClean Lift-Away NZ801ANZ Bedienungsanleitung

Shark

Shark Apex DuoClean AX952 Series Bedienungsanleitung

Shark

Shark IZ300 Series Bedienungsanleitung

Shark

Shark Navigator DLX Bedienungsanleitung

Shark

Shark RV2001EU Bedienungsanleitung

Shark

Shark NVC80C Bedienungsanleitung

Shark

Shark Rocket ZS350 Series Bedienungsanleitung

Shark

Shark NP320QUK Bedienungsanleitung

Shark

Shark Rotator NV651 Bedienungsanleitung

Shark

Shark V2930 Bedienungsanleitung

Shark

Shark Navigator Lift-Away ZD201 Series Bedienungsanleitung

Beliebte Staubsauger Handbücher anderer Marken

Bissell

Bissell LittleGreen Proheat 1425 Series Bedienungsanleitung

Panasonic

Panasonic MC-YL637S147-AE Bedienungsanleitung

NEFF

NEFF N17XH10 0 Series Bedienungsanleitung

LG A9 Series Bedienungsanleitung

Oreck

Oreck Cordless Captura BK51700 Series Bedienungsanleitung

Kogan

Kogan KAVACROBVWA Bedienungsanleitung

Kränzle

Kränzle VENTOS 50 ID Benutzerhandbuch

EVVO

EVVO Ai35 Bedienungsanleitung

DeWalt

DeWalt DWH200D Bedienungsanleitung

Pontec

Pontec Pondomatic Vacuum Cleaner Bedienungsanleitung

Cleanmaxx

Cleanmaxx PC-P007E Bedienungsanleitung

Exido

Exido 240-114 Bedienungsanleitung

RIDGID

RIDGID WD1685AU0 Bedienungsanleitung

Ezviz

Ezviz RE4P Bedienungsanleitung

STG global

STG global TANVAC HDV3000 Bedienungsanleitung

Factory

Factory M3340 Bedienungsanleitung

Shop-Vac

Shop-Vac VN92 SERIES Bedienungsanleitung

Nobles

Nobles 608669 Produkthandbuch