Shinybow USA ANI-44C5HD Bedienungsanleitung

ANI-44C5HD

Super HDMI Matrix 4x4 over HDBaseT

INSTRUCTION MANUAL

USER MANUAL

Table of Contents

1.0 Introduction..........................................................................1

2.0 Specifications.......................................................................2

3.0 Package Contents................................................................2

4.0 Panel Descriptions...............................................................3

5.0 Connection and Operation..................................................5

Super HDMI Matrix 4×4 over HDBaseT

１

Super HDMI Matrix 4x4 over HDBaseT

Dear customer

Thank you for purchasing this product. For optimum performance and safety,

please read these instructions carefully before connecting, operating or adjusting

this product. Please keep this manual for future reference.

1.0 INTRODUCTION

This Super HDMI Matrix offers unprecedented flexibility and convenience by

routing high definition audio/video from any of four HDMI video sources to any of

4 displays over HDMI cable or 4 remote displays over inexpensive, standard

CAT5e/6 cable. With built-in 4 HDBaseT modules, It can extend your HD display

up to 330 feet (100 meters) away from your HDMI or DVI-D source using one

CAT5e/6 cable.Four receivers work with the main sender as a full functional

module. Every source and display is accessible at all times by selecting it with an

IR remote or through RS232 port.

1.1 FEATURES

This product has many features that enable it to perform in a superior manner.

Among those features you will find:

zAllows any HDMI display to view any source at any time

zAllows any source to be displayed on multiple displays at the same time

zEach Output includes one HDMI output and HDBaseT output, but only one

way is available at a time.

zEach HDBaseT output is connected to a Receiver.

zHDBaseT output extends signal up to 100m for 1080p by one CAT5e/6 cable.

zEach Input includes an infrared Emitter, which is used to control the

long-distance source device by Remote Control.

zEach display's inputs can be switched with the IR remote control or through

RS232

zSupports highest video resolution 1080p.

zSupports 225MHz/2.25Gbps per channel (6.75Gbps all channel) bandwidth.

zSupports 12bit per channel (36bit all channel) deep color.

zSupports HDCP

zSupports uncompressed audio such as LPCM.

zSupports compressed audio such as DTS Digital, Dolby Digital（including

DTS-HD and Dolby True HD）.

zSupport 3D all format, including [email protected]/24Hz, [email protected]/60Hz/50Hz,

bandwidth up to 225MHz.

zBuilt-in IR extender function allows IR remote control of Source devices from

remote viewing location by sending IR commands received in the vicinity of

the Display back to the Source devices.

Super HDMI Matrix 4×4 over HDBaseT

２

2.0 SPECIFICATIONS

Signal Inputs/Output

HDMI Connector type A 19 pin female

Input DDC Signal 5 volts p-p (TTL)

Control Port RS-232 Female, Mini-Stereo

Output Signal HDMI output, HDBaseT output

Operating Frequency

Vertical Frequency Range 50/60Hz

Video Amplifier Bandwidth 2.25Gbps/225MHz

Resolutions(HDTV)

Interlaced(50&60Hz) 480i,576i,1080i

Progressive(50&60Hz) 480p,576p,720p,1080p

Mechanical

Size of HDMI Switch Splitter (L-W-H) 441×202×45MM

Weight of HDMI Switch Splitter (Net) 2330g

Warranty

Limited Warranty 1 Year Parts and Labor

Environmental

Operating Temperature 0 ℃to +70℃

Operating Humidity 10% to 85 % RH (no condensation)

Storage Temperature -10℃to +80℃

Storage Humidity 5% to 90 % RH (no condensation)

Power Requirement

Power Supply for Super HDMI Matrix 12V DC@3A

Power consumption (Max) 24W

Power Supply for Receiver 5V DC@2A

Power consumption (Max) 5W

Regulatory Approvals

Converter Unit FCC,CE,UL

Power Supply UL,CE,FCC

Note: Specifications are subject to change without notice.

3.0 Package Contents

Before attempting to use this unit, please check the packaging and make sure the

following items are contained in the shipping carton:

Packaging of Main Unit

1) Main unit

2) Remote Control x1

3) External infrared receiver (IR) x1

4) External infrared emitter (IE) x4

5) 12V@3A DC Power Supply x1

Super HDMI Matrix 4×4 over HDBaseT

３

6) User’s Manual x1

Packaging of Accessories

7) Receivers x4

8) Remote Control for Receivers x4

9) External infrared receiver (IR) x4

10)5V DC @2A Power Supply x4

4.0 PANEL DESCRIPTIONS

Please study the panel drawings below and become familiar with the structure.

Main Unit

①IR Receiver

This receiver will accept command for switching between HDMI input devices

using the included Main unit remote control.

②"Select button" and "Input LED indicator"

There is a set of 4 LEDs for each of the four output ports. Each of the four LED

output sets contain 4 individual LED’s that will indicate which input source is

active for that output. The currently selected input will be indicated by an active

LED.

③Power indicator

This LED will become active once the included 12V DC power supply is

properly connected between the unit and a open wall power receptacle.

④Standby

Pressing this button, the main unit will access standby mode.

⑤DC/12V

Connect the included 12V DC power supply between this port and an open

wall power receptacle.

⑥HDMI and HDBaseT output ports (only one way is available at a time.)

Connect 4 local HDTVs to 4 HDMI output ports.

Super HDMI Matrix 4×4 over HDBaseT

４

Connect 4 receivers to 4 HDBaseT output ports.

⑦IE(Infrared emitter) and HDMI Input ports

Connect 4 Infrared emitters to 4 IE ports.

Connect 4 HDMI source devices to 4 HDMI Input ports.

⑧IR EXT

Connect external IR receiver to this port.

⑨RS232

Connect this port to PC, and over the “super terminal” of PC, you can control

and switch the main unit.

Receiver

①IR Receiver

This receiver will accept command for switching between HDMI input devices

using the included the remote control of the Receiver.

②Power indicator

This LED will become active once the included 5V DC power supply is

properly connected between the unit and a open wall power receptacle.

③Input LED indicator

An active LED will be indicated when that input port is selected.

④“Select” button

Press this button to switch the source device.

⑤Power ON/OFF switch

⑥DC/5V

Connect the included 5V DC power supply between this port and an open

wall power receptacle.

⑦HDBaseT input port

Connect the HDBaseT output port of the main unit to this port over one cat5e/6

Super HDMI Matrix 4×4 over HDBaseT

５

cable.

⑧HDMI output port

Connect this port to HDTV.

⑨IR EXT

Connect this port to the external IR receiver.

⑩RS232

Connect this port to PC, and over the “super terminal” of PC, you can control

and switch the Receiver.

5.0 Connection and Operation

5.1 Connection

1) Connect all source devices to the HDMI inputs on the main unit.

2) Either HDMI or HDBaseT can be selected as signal output for Output

A/B/C/D. When choosing the HDMI as signal output, connect displays and

main unit directly over HDMI cable. When choosing HDBaseT as signal output,

connect receivers and main unit over cat5e/6 cable, and then connect output

of receivers to displays. (Note: HDMI and HDBaseT of each output can not be

connected simultaneously)

3) Connect the 12V@3A power supply to the main unit, and 5V@2A power

supply to each receiver.

Note: 1) Please make sure to cut off the power before insert IR Extender into the

Converter.

2) Please make sure to insert the plug of IR Extender into the Converter

completely.

Attention: Insert / Extract cable gently.

5.2 Operation

1) The automatic connection when supplied with power

The available outputs will automatically connect to the available inputs

according to their sequence number. Meanwhile, the redundant available ports

(input or output) or unavailable ports will not be connected.

For example:

1. If outputs A, B, D are connected to three power-on TVs separately, and the

four inputs are all have its own source devices (work-on mode), then the power-on

main unit will make a connection as follow:

1→A 2→B 3→D

(Output C and input 4 are not connected)

2. If outputs A, Care connected to three power-on TVs separately, and only

two inputs have its source devices (work-on mode), then the power-on Switch

Splitter will make a connection as follow:

1→A 3→C

(Output B, output D, input2 and input4 are not connected)

2) Selecting source devices by buttons

Super HDMI Matrix 4×4 over HDBaseT

６

Four buttons on the main unit are used to select source devices circularly for

inputs A, B, C, and D. Once you press the button, it will select next available

source device.

3) Selecting source devices by IR remote

1. Power button

The power button of the IR remote can control the power of the main unit.

Pressing this button, the power-on unit will be turned off. If you press it

again, the unit will be turned on.

2. Other buttons

Depending on outputs A, B, C, D, the other buttons of the IR remote can

be divided into four groups. Each group has five buttons: ‘off’—turn off its

outputs. 1, 2, 3, 4 are used to select input port accordingly.

4) Selecting source devices by RS232

①. Introduction of RS232 remote operation:

RS232 remote operation is mainly based on the “super terminal” of

Windows operation system. Its parameter should be: ANSI 4800 8-N-1-non

②. Operation

A. Connect the switch splitter to the COM of PC with a RS232 cable.

B. Chose the right COM when you setting “super terminal” and then set the

parameter as follow:

Baud frequency：4800

Data bit: 8

Parity bit: N

Stop bit: 1

Data stream: NON

C. Inputting your instruction. The instruction should be two or three letter, and

finish with “Enter” button.

Please input next instruction in three seconds or the”Overtime instruction”

will appear.

The input instruction should be right, or you will be rejected with the “wrong

instruction”

If the input or output that you chose is not connected to devices or not in

power-on mode, “ineffective instruction” will inform you.

If your instruction is performed, you can see the instruction of “successful

operation”.

③. Instruction input method

A. Selecting source device

Sequence number of output (A/B/C/D) + sequence number of the input

(1/2/3/4) + “Enter”

For example: If you want display B to view source 3, then you can input “B3

“and finish with “Enter”.

B. Turning off an output

C + Sequence number of the output that you want to turn off (A/B/C/D) +

“Enter”

Super HDMI Matrix 4×4 over HDBaseT

７

For example: If you want to turn off output B, then you can input CB, and

finish with “Enter”.

C. Turning off the Switch Splitter:

OFF + “Enter”

D. Turning on the Switch Splitter:

ON + “Enter”

E. Inquiry:

QS + “Enter”

This order enables you know which input and output are available and the

connections of input and output.

RS232 Command List

Command Function description

QS Query connected Source and Sink device

ON Turn on the power of 4x4

OFF Turn off the power of 4x4

AU Source and Sink device is connected automatically

A1 "Sink A" select "Source 1"

A2 "Sink A" select "Source 2"

A3 "Sink A" select "Source 3"

A4 "Sink A" select "Source 4"

B1 "Sink B" select "Source 1"

B2 "Sink B" select "Source 2"

B3 "Sink B" select "Source 3"

B4 "Sink B" select "Source 4"

C1 "Sink C" select "Source 1"

C2 "Sink C" select "Source 2"

C3 "Sink C" select "Source 3"

C4 "Sink C" select "Source 4"

D1 Sink D select "Source 1"

D2 Sink D select "Source 2"

D3 Sink D select "Source 3"

D4 Sink D select "Source 4"

CA Turn off the output of Sink A

CB Turn off the output of Sink B

CC Turn off the output of Sink C

S u per H D M I M at r ix 4 × 4 o v er H D B as eT

CD Turn off the outputof SinkD

5.3 CONECTION DIAGRAM

P/N3030

END OF DOCUMENT

Inhaltsverzeichnis

Andere Shinybow USA Matrix-Umschalter Handbücher

Shinybow USA

Shinybow USA AB-5688LCM Bedienungsanleitung

Shinybow USA

Shinybow USA SB-5560 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-5684K Bedienungsanleitung

Shinybow USA

Shinybow USA SB-5644 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-4184 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-5688CK Bedienungsanleitung

Shinybow USA

Shinybow USA SB-3877 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-5544BNC Bedienungsanleitung

Shinybow USA

Shinybow USA SB-8188CT Bedienungsanleitung

Shinybow USA

Shinybow USA SB-5688CT-A Bedienungsanleitung

Shinybow USA

Shinybow USA SB-5548LCM Bedienungsanleitung

Shinybow USA

Shinybow USA SB-5450 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-8802 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-5669CK Bedienungsanleitung

Shinybow USA

Shinybow USA SB-5520 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-5645LCM Bedienungsanleitung

Shinybow USA

Shinybow USA SB-5645AK Bedienungsanleitung

Shinybow USA

Shinybow USA SB-5688CT-A Bedienungsanleitung

Shinybow USA

Shinybow USA ANI-3088 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-8804 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-5645 Bedienungsanleitung

Shinybow USA

Shinybow USA SB-5688Kp Bedienungsanleitung

Shinybow USA

Shinybow USA SB-5688AK Bedienungsanleitung

Shinybow USA

Shinybow USA SB-5688 Bedienungsanleitung

Beliebte Matrix-Umschalter Handbücher anderer Marken

Broadcast Tools

Broadcast Tools SS 8.2 Bedienungsanleitung

Altimium

Altimium MATF32 Bedienungsanleitung

ALFAtron

ALFAtron ALF-MUK44N Bedienungsanleitung

Monoprice

Monoprice Blackbird 15377 Bedienungsanleitung

Kramer

Kramer XL 3216VS Bedienungsanleitung

PTN

PTN FMX12 Bedienungsanleitung

CYP

CYP nT15GX01 Bedienungsanleitung

Kramer

Kramer VP-2x2 Bedienungsanleitung

Kramer

Kramer Sierra Video 6432V5xl Bedienungsanleitung

TESmart

TESmart HMA0402A40 Bedienungsanleitung

Kramer

Kramer LASSEN XL 3232S Bedienungsanleitung

Kramer

Kramer VS-66HDCPxl Bedienungsanleitung

Atlona

Atlona AT-HDMI-22M Bedienungsanleitung

Link

Link HD8X8 Bedienungsanleitung

AMX

AMX AVS-OP-2020-117 Anleitungen und Rezepte

Extron electronics

Extron electronics MTPX Plus Series Bedienungsanleitung

Key Digital

Key Digital Champion KD-16x16CS Bedienungsanleitung

Kramer

Kramer VS-66H Bedienungsanleitung