Shure GLXD4RPE Bedienungsanleitung

GLXD4R+

Wireless Receiver

Online user guide for GLXD4R+ wireless system. Includes setup instructions, specifications, and more.

Version: 1.1 (2023-B)

Shure Incorporated
2/39
Table of Contents
GLXD4R+   Wireless Receiver 3
System Overview 3
Features 3
Receiver 3
Receiver Screen 5
Set Up the Receiver 6
Transmitters 7
Transmitter Status LED 8
Wearing the Bodypack 8
Wearing the Headworn Microphone 9
Correct Microphone Placement 9
Install Transmitter Batteries 9
Batteries and Charging 10
Receiver Charging Bay 10
Charging from an AC Power Source 11
Charging Status LEDs 11
Charging Times and Transmitter Runtimes 11
Important Tips for Care and Storage of Shure Recharge
able Batteries 12
Tips to Improve Wireless System Performance 12
Additional Tips 13
Rack-Mounting Instructions 13
Remote Antenna Placement 14
System Set Up 15
Manually Linking Receivers and Transmitters 15
Linking Two Transmitters to a Receiver 15
Identifying Linked Transmitters and Receivers with Re
mote ID 15
Multiple Receiver Systems 16
Receiver Band Modes 16
Gain Adjustment 17
Locking and Unlocking the Controls 17
Locking the Receiver Controls 17
Locking the Transmitter Controls 17
Receiver Display Brightness 17
Firmware 18
Resetting Components 18
Resetting the Receiver 18
Resetting the Transmitter 18
Troubleshooting 18
Accessories 20
Specifications 21
Diagrams 26
Frequency Tables 27
IMPORTANT SAFETY INSTRUCTIONS 34
WARNING 35
Note: 35
Information to the user 36
Certifications 36

Shure Incorporated

3/39

•

GLXD4R+

Wireless Receiver

System Overview

GLX-D+ Dual Band Digital Wireless offers confidence without complexity. Dual-band operation in 2.4 and 5.8 GHz more than

doubles the available bandwidth to avoid interference without audio interruption. The receiver is compatible with a selection of

lavalier, headset, and vocal microphones. The included lithium-ion battery offers up to 12 hours of runtime, and can be charged

directly on the receiver or via USBC. Rackmount receivers can be combined with the GLXD+ Frequency Manager and direc

tional antennas (both sold separately) for installations where a larger number of channels are needed.

Features

Exceptional digital audio clarity

Compatible with multiple legendary microphone options

Automatically moves away from interference without audio interruption

Operates in 2.4 and 5.8 GHz spectrum*

Rechargeable battery delivers up to 12 hours of runtime

Rock-solid RF performance for multiple system installations

License-free frequency range

Note: region dependent

Receiver

Shure Incorporated

4/39

◦

①RF status LED

ON = Linked transmitter is on

Flashing = Searching for transmitter

OFF = Linked transmitter off or transmitter unlinked

②Group button

Press and hold for two seconds to enable manual group edit.

③Data sync LED

ON = Data sync is on (receiver connected to GLX-D+ frequency manager)

Flashing = Searching for frequencies

OFF = Data sync is off (receiver not connected to GLX-D+ frequency manager)

④Link button

Press to manually link receiver to a transmitter or to activate the remote ID function.

⑤Channel button

Press to start a channel scan.

⑥Display

Shows receiver and transmitter status.

Shure Incorporated

5/39

◦

⑦Gain buttons

Press to increase or decrease transmitter gain in 1 dB increments.

⑧Battery charging indicator

Illuminates when battery is in charging bay:

Red = Battery charging

Green Flashing = Battery charge at 90%

Green = Battery charged

Amber Flashing = Charging error, replace battery

⑨Battery charging bay

Charges transmitter battery.

⑩Power button

Powers the unit on and off.

⑪Antenna

Two antennas per receiver. Antennas pick up the signal from the transmitter.

⑫Power supply port

Connect the supplied 15 V DC external power supply.

⑬USB-C port

Connect to computer to download firmware updates.

⑭Mic/Line switch

Sets XLR output level to microphone or line level.

⑮XLR audio output

Supplies microphone-level or line-level audio output.

⑯Inst/Aux output

TRS ¼" (6.35mm) audio output. Connect to mixers, recorders, and amplifiers.

Receiver Screen

Shure Incorporated

6/39

◦

①Group

Displays the selected group.

②Channel

Displays the selected channel.

③Transmitter battery runtime

Displays remaining battery life in hours and minutes.

Alternatively displays the following battery status:

CALC = Battery life calculation

Lo = Battery life less than 15 minutes

Err = Replace battery

④Audio meter

Indicates audio signal level and peaks.

⑤Gain

Displays transmitter gain settings (dB).

⑥OL indicator

Indicates audio overload, reduce gain.

⑦Transmitter locked

Displayed when linked transmitter controls are locked.

⑧Scanning

Indicates a scan is in progress.

⑨Auto

Indicates that the selected group has backup channels available.

Set Up the Receiver

Attach the included antennas to the back of the receiver.

Connect the PS43 power supply to the receiver and plug the cord into an AC power source.

Connect the audio output to an amplifier or mixer.

Shure Incorporated

7/39

Transmitters

Shure Incorporated

8/39

◦

①Antenna

Carries wireless signal.

②Status LED

LED color and state indicate transmitter status.

③Power switch

Turns the transmitter on/off.

④TA4M input port

Connects to a 4-Pin mini connector (TA4F) microphone or instrument cable.

⑤USB-C charging port

Connect to USB battery charger.

⑥Link button

Press and hold within 5 seconds of power-on to manually link with receiver.

Press momentarily to activate remote ID function.

⑦Battery compartment

Holds 1 Shure rechargeable battery.

⑧Microphone cartridge

GLXD2+ transmitter models are available with the following cartridge types: SM58, Beta 58, Beta 87A.

Transmitter Status LED

LED is green during normal operation.

LED color or flashing indicates a change in transmitter status as shown in the following table:

Color State Description

Green

Flashing (slow) Transmitter attempting relink with receiver

Flashing (fast) Unlinked transmitter searching for receiver

Flashes 3 times Indicates locked transmitter when power switch is pressed

Red

On Battery life < 1 hour

Flashing Battery life < 30 minutes

Red/Green Flashing Remote ID active

Amber Flashing Battery error; remove and insert again, or replace battery

Wearing the Bodypack

Clip the bodypack to a belt or slide a guitar strap through the bodypack clip as shown.

For best results, the belt should be pressed against the base of the clip.

Shure Incorporated

9/39

•

Wearing the Headworn Microphone

Position the headworn microphone 13 mm (1/2 in.) from the corner of your mouth.

Position lavalier and headworn microphones so that clothing, jewelry, or other items do not bump or rub against the micro

phone.

Correct Microphone Placement

Hold the microphone within 12 inches from the sound source.

For a warmer sound with increased bass presence, move the microphone closer to the sound source.

Do not cover grille with hand.

Install Transmitter Batteries

Important: Always fully charge a new battery before first use.

Bodypack:

Move the locking lever to the open position and slide the battery door open.

Place the battery into the transmitter.

Close the battery door.

Shure Incorporated

10/39

Handheld:

Unscrew and remove the battery cover.

Place the battery into the transmitter.

Replace and tighten the battery cover.

Batteries and Charging

GLX-D+ transmitters are powered by Shure SB904 lithium-ion rechargeable batteries. Advanced battery chemistry maximizes

runtimes with zero memory effects, eliminating the need to discharge batteries prior to charging.

When not in use, recommended battery storage temperature is 10°C (50°F) to 25°C (77°F).

Note: The transmitter will not pass RF or audio signals when connected to the charging cable.

The following battery charging options are available:

Receiver Charging Bay

The receiver's built-in charging bay will charge transmitter batteries when the receiver is plugged in to a power outlet.

Insert the battery into the charging bay.

Monitor the battery charging indicator on the front panel.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Shure Empfänger Handbücher

Shure

Shure GLXD4+ Bedienungsanleitung

Shure

Shure MW5 Bedienungsanleitung

Shure

Shure GLXD4 Bedienungsanleitung

Shure

Shure Axient AXT400 Bedienungsanleitung

Shure

Shure GLXD4+ Bedienungsanleitung

Shure

Shure SVX Wireless Bedienungsanleitung

Shure

Shure GLXD4+ Bedienungsanleitung

Shure

Shure GLXD4R Bedienungsanleitung

Shure

Shure GLX-D Bedienungsanleitung

Shure

Shure P4R RECEIVER P4R Bedienungsanleitung

Shure

Shure SLX4L Betriebsanleitung

Shure

Shure BLX4R Bedienungsanleitung

Shure

Shure BLX4R Bedienungsanleitung

Shure

Shure BLX4R Bedienungsanleitung

Shure

Shure BLX288/B58 Bedienungsanleitung

Shure

Shure U4S Betriebsanleitung

Shure

Shure SLX4L Bedienungsanleitung

Shure

Shure Geobox G-302 Betriebsanleitung

Shure

Shure P4R RECEIVER P4R Bedienungsanleitung

Shure

Shure P4R RECEIVER P4R Bedienungsanleitung

Shure

Shure BLX4R Bedienungsanleitung

Shure

Shure Axient AXT400 Bedienungsanleitung

Shure

Shure T4 Bedienungsanleitung

Shure

Shure ADX5D Bedienungsanleitung

Beliebte Empfänger Handbücher anderer Marken

Garmin

Garmin GA 23 Bedienungsanleitung

Aiphone

Aiphone PS-12F Bedienungsanleitung

IMES

IMES TCS-01CA-PMI Bedienungsanleitung

BWI Eagle

BWI Eagle AIR-EAGLE SR Handbuch

AMIMON

AMIMON AMN12310 WHDI Bedienungsanleitung

Dual

Dual DMCPA79BT Betriebsanleitung

Sound Associates

Sound Associates SA652P Bedienungsanleitung

Sherwood

Sherwood NewCastle R-772 Bedienungsanleitung

Audio

Audio A10-RX Series Bedienungsanleitung

AllSee

AllSee PushShare PSRV1.1 Bedienungsanleitung

DEMAG

DEMAG DRC-DR D2 Bedienungsanleitung

Teleco

Teleco TVRCL868A02 Bedienungsanleitung

Bosch

Bosch RF3222E Bedienungsanleitung

Kramer

Kramer 631R Bedienungsanleitung

Xpress

Xpress xmc10 Bedienungsanleitung

JVC

JVC KD-MR1BTS Bedienungsanleitung

Omega Engineering

Omega Engineering UWTC-REC3 Bedienungsanleitung

e-survey

e-survey E300 Pro Bedienungsanleitung