SICK GRL18V Bedienungsanleitung

OPERATING INSTRUCTION

GRL18(S)V

Cylindrical photoelectric sensors

BETRIEBSANLEITUNG

GRL18(S)V

Rundlichtschranken

Described product

GR18 Inox

GRL18(S)V

Manufacturer

SICK AG

Erwin-Sick-Str. 1

79183 Waldkirch

Germany

Production location

SICK, Malaysia

Legal information

This work is protected by copyright. Any rights derived from the copyright shall be

reserved for SICK AG. Reproduction of this document or parts of this document is

only permissible within the limits of the legal determination of Copyright Law. Any modi‐

fication, abridgment or translation of this document is prohibited without the express

written permission of SICK AG.

The trademarks stated in this document are the property of their respective owner.

Original document

This document is an original document of SICK AG.

2006/42/EC

SAFETY

8021183.1ABM / 2020-12-21 | SICK

Subject to change without notice 3

Contents

1 General safety notes......................................................................... 5

2 Notes on UL approval........................................................................ 5

3 Intended use...................................................................................... 5

4 Operating and status indicators...................................................... 5

5 Mounting............................................................................................. 6

6 Electrical installation........................................................................ 6

7 Commissioning.................................................................................. 8

7.1 Alignment.................................................................................................. 8

7.2 Check the application conditions............................................................ 8

7.3 Setting....................................................................................................... 9

8 Troubleshooting................................................................................. 9

8.1 Troubleshooting table............................................................................... 9

9 Disassembly and disposal............................................................... 10

10 Maintenance...................................................................................... 10

11 Technical specifications................................................................... 11

11.1 Dimensional drawings.............................................................................. 12

CONTENTS

48021183.1ABM / 2020-12-21 | SICK

Subject to change without notice

1 General safety notes

■Read the operating instructions before commissioning.

■

Connection, mounting, and configuration may only be performed by trained

specialists.

■

2006/42/EC

SAFETY

Not a safety component in accordance with the EU Machinery Directive.

■

Do not install the sensor at locations that are exposed to direct sunlight

or other weather influences, unless this is expressly permitted in the operating

instructions.

■These operating instructions contain information required during the life cycle of

the sensor.

2 Notes on UL approval

UL: Only for use in applications in accordance with NFPA 79. These devices shall be

protected by a 1 A fuse suitable for 30 V DC.

Adapters listed by UL with connection cables are available.

Enclosure type 1.

3 Intended use

The GRL18(S)V is an opto-electronic photoelectric retro-reflective sensor (referred to as

“sensor” in the following) for the optical, non-contact detection of objects, animals, and

persons. A reflector is required for this product to function. If the product is used for any

other purpose or modified in any way, any warranty claim against SICK AG shall become

void.

4 Operating and status indicators

GENERAL SAFETY NOTES 1

8021183.1ABM / 2020-12-21 | SICK

Subject to change without notice 5

+–

Figure 1: Operating element: sensitivity setting

5 Mounting

Mount the sensor and the reflector using suitable mounting brackets (see the SICK

range of accessories). Align the sensor and reflector with each other.

max. 90 Nm

Note the sensor’s maximum permissible tightening torque of 90 Nm.

6 Electrical installation

The sensors must be connected in a voltage-free state (UV = 0 V). The following informa‐

tion must be observed, depending on the connection type:

– Male connector connection: pin assignment

– Cable: wire color

Only apply voltage/switch on the voltage supply (UV > 0 V) once all electrical connec‐

tions have been established. The green LED indicator lights up on the sensor.

Explanations of the connection diagram (following tables):

Q / Q = switching outputs

n. c. = not connected

4 OPERATING AND STATUS INDICATORS

68021183.1ABM / 2020-12-21 | SICK

Subject to change without notice

UB: 10... 30 V DC, see „Technical specifications“, page 11

Table 1: DC

GRL18(S)V x11xxx x13xxx x24xxx x23xxx

1+ (L+) + (L+) + (L+) + (L+)

2Qn. c. Qn. c.

3- (M) - (M) - (M) - (M)

4Q Q Q Q

1 = BN

2 = WH

3 = BU

4 = BK

0.14 mm2

AWG26

1 = BN

3 = BU

4 = BK

0.14 mm2

AWG26

4 3

Table 2: DC

PNP: Q (≤ 100 mA)

+ (L+)

– (M)

+ (L+)

– (M)

NPN: Q (≤ 100 mA)

+ (L+)

– (M)

+ (L+)

– (M)

PNP: Q (≤ 100 mA)

+ (L+)

– (M)

+ (L+)

– (M)

NPN: Q (≤ 100 mA)

+ (L+)

– (M)

+ (L+)

– (M)

ELECTRICAL INSTALLATION 6

8021183.1ABM / 2020-12-21 | SICK

Subject to change without notice 7

7 Commissioning

7.1 Alignment

Align the sensor with a suitable reflector. Select the position so that the red emitted

light beam hits the center of the reflector. The sensor must have a clear view of the

reflector, with no object in the path of the beam [see figure 2]. You must ensure that the

optical openings of the sensor and reflector are completely clear.

Figure 2: Alignment

7.2 Check the application conditions

Adjust the distance between the sensor and the reflector according to the correspond‐

ing diagram [ see figure 3] (x = sensing range, y = operating reserve).

0 1

(3.28)

(6.56)

(9.84)

(13.12)

(16.40)

(19.69)

(22.97)

(26.25)

100

Operating reserve

Distance in m (feet)

Figure 3: Characteristics

After alignment is complete, move a non-transparent object into the path of the

beam. Use and see table 2, page 7 to check the function. If the switching output

fails to behave in accordance with the table, check the application conditions, see

„Troubleshooting table“, page 9.

7 COMMISSIONING

88021183.1ABM / 2020-12-21 | SICK

Subject to change without notice

Figure 4: Sensing range

Table 3: Definition of sensing range

2GRL18(S)V

1PL80A 0.03 ... 7.2 m

2PL40A 0.03 ... 6.2 m

3PL20A 0.03 ... 3.8 m

4P250 0.03 ... 6.4 m

5PL22 0.03 ... 2.2 m

6REF-Plus 3436 0.06 ... 2.0 m

7.3 Setting

Sensitivity setting

Sensor which it is not possible to set: The sensor is adjusted and ready for operation.

The sensitivity is adjusted with the potentiometer (type: 270°). Clockwise rotation:

operating reserve increased; counterclockwise rotation: operating reserve reduced. We

recommend setting the potentiometer to “Maximum”. A lower operating reserve may be

necessary for depolarizing surfaces.

The sensor is adjusted and ready for operation.

8 Troubleshooting

The Troubleshooting table indicates measures to be taken if the sensor stops working.

8.1 Troubleshooting table

Table 4: Troubleshooting

LED indicator/fault pattern Cause Measures

Green LED does not light up No voltage or voltage below

the limit values

Check the power supply,

check all electrical connec‐

tions (cables and plug connec‐

tions)

Green LED does not light up Voltage interruptions Ensure there is a stable power

supply without interruptions

Green LED does not light up Sensor is faulty If the power supply is OK,

replace the sensor

Yellow LED flashes Sensor is still ready for oper‐

ation, but the operating condi‐

tions are not ideal

Check the operating condi‐

tions: Fully align the beam

of light (light spot) with the

reflector / Clean the optical

surfaces (sensor and reflec‐

tor) / Readjust the sensitiv‐

ity (potentiometer) / If the

potentiometer is set to the

COMMISSIONING 7

8021183.1ABM / 2020-12-21 | SICK

Subject to change without notice 9

LED indicator/fault pattern Cause Measures

max. sensitivity: Reduce the

distance between the sensor

and the reflector, and check

the reflector type / Reflector

is not suitable for the appli‐

cation in question (we recom‐

mend only using SICK reflec‐

tors)/ Check sensing range

and adjust if necessary, see

table 3. / Distance between

the sensor and the reflector is

too long

Signal interruptions when

object is detected

Depolarizing property of the

object surface (e.g., tape),

reflection

Reduce sensitivity or change

the position of the sensor

9 Disassembly and disposal

The sensor must be disposed of according to the applicable country-specific regula‐

tions. Efforts should be made during the disposal process to recycle the constituent

materials (particularly precious metals).

NOTE

Disposal of batteries, electric and electronic devices

•According to international directives, batteries, accumulators and electrical or

electronic devices must not be disposed of in general waste.

•The owner is obliged by law to return this devices at the end of their life to the

respective public collection points.

•

WEEE: This symbol on the product, its package or in this document,

indicates that a product is subject to these regulations.

10 Maintenance

SICK sensors are maintenance-free.

We recommend doing the following regularly:

•Clean the external lens surfaces

•Check the screw connections and plug-in connections

No modifications may be made to devices.

Subject to change without notice. Specified product properties and technical data are

not written guarantees.

9 DISASSEMBLY AND DISPOSAL

10 8021183.1ABM / 2020-12-21 | SICK

Subject to change without notice

Andere Handbücher für GRL18V

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Sprachen:

Andere SICK Zubehör Handbücher

SICK

SICK KTX Prime KTX-WB9224225AZZZZ Bedienungsanleitung

SICK

SICK LMS1104C-111031S01 Bedienungsanleitung

SICK

SICK deTem2 Core Bedienungsanleitung

SICK

SICK IQ80-50BPP-KC0 Bedienungsanleitung

SICK

SICK GRSE18V Bedienungsanleitung

SICK

SICK CQF16 Bedienungsanleitung

SICK

SICK WLA26 00 Series Bedienungsanleitung

SICK

SICK deTec4 Core Bedienungsanleitung

SICK

SICK UC12 Bedienungsanleitung

SICK

SICK LMS4000 Bedienungsanleitung

SICK

SICK deTem4 Core A/P Bedienungsanleitung

SICK

SICK WL34 Bedienungsanleitung

SICK

SICK WS26 Bedienungsanleitung

SICK

SICK GSE2 Flat Side Bedienungsanleitung

SICK

SICK Bulkscan LMS511 Bedienungsanleitung

SICK

SICK HTE18 Series Bedienungsanleitung

SICK

SICK GSE6L Series Bedienungsanleitung

SICK

SICK Bluetooth WLA16 Bedienungsanleitung

SICK

SICK WI180C-EN Bedienungsanleitung

SICK

SICK SENSICK UM30-11111/5 Bedienungsanleitung

SICK

SICK GRTE18 Bedienungsanleitung

SICK

SICK WLA26 Series Bedienungsanleitung

SICK

SICK PowerProx WTT12L-A Series Bedienungsanleitung

SICK

SICK GLD20 Bedienungsanleitung

Beliebte Zubehör Handbücher anderer Marken

Hillco

Hillco 2810 Bedienungsanleitung

Siemens

Siemens QSA2700D Bedienerhandbuch

Contours

Contours ZY024 Bedienungsanleitung

Saivod

Saivod VS621 Bedienungsanleitung

Virtuox

Virtuox VirtuCLEAN 2.0 Bedienungsanleitung

SCE

SCE ENVIRO-THERM SCE-TE170B24VSS Bedienungsanleitung

Z-Wave

Z-Wave HSD-200Z Bedienungsanleitung

turck

turck FMX-IM-2UPLI63FX Bedienungsanleitung

Decagon Devices

Decagon Devices 10HS Bedienungsanleitung

UPPAbaby

UPPAbaby Cup Holder Bedienungsanleitung

Elko

Elko SmartSensor Leakage Wireless Bedienungsanleitung

Grizzly

Grizzly H8371 Bedienungsanleitung

Panasonic

Panasonic HG-T Series Bedienungsanleitung

IFM Electronic

IFM Electronic Efector 250 Series Referenzhandbuch

DigiDesign

DigiDesign 888/24 I/O Bedienungsanleitung

PROZIS

PROZIS QUAY Bedienungsanleitung

patagonia

patagonia PSI Vest Bedienungsanleitung

SFC Energy

SFC Energy EFOY GO! Bedienungsanleitung