SICK ES11 Bedienungsanleitung
OPERATING INSTRUCTIONS
ES11
Emergency stop pushbutton
PM-ES11
Contents
1 Ordering information........................................................................ 3
2 About this document........................................................................ 4
2.1 Scope......................................................................................................... 4
3 On safety............................................................................................. 5
3.1 Application................................................................................................ 5
4 Product description........................................................................... 6
4.1 Items supplied.......................................................................................... 6
4.2 Function..................................................................................................... 6
5 Mounting............................................................................................. 7
6 Connection......................................................................................... 8
7 Tests before the initial commissioning.......................................... 9
8 Periodic technical inspections......................................................... 10
9 What to do in case of a malfunction.............................................. 11
10 Uninstalling......................................................................................... 12
11 Compliance with EU directives........................................................ 13
12 Technical specifications................................................................... 14
12.1 Data sheet................................................................................................. 14
12.2 Dimensional drawings.............................................................................. 14
CONTENTS
2O P E R A T I N G I N S T R U C T I O N S | ES11 8022342/2017-12-15 | SICK
Subject to change without notice
1 Ordering information
Table 1: Part numbers and type codes
Controls Connection type Type Part number
Emergency stop button
reset button, illuminable,
Plug, M12, 8-pin PM-ES11 6044629
Table 2: Spare parts
Retaining clips, 10 pieces 5326274
ORDERING INFORMATION 1
8022342/2017-12-15 | SICK O P E R A T I N G I N S T R U C T I O N S | ES11 3
Subject to change without notice
2 About this document
These operating instructions are original operating instructions.
2.1 Scope
This operating instruction is valid for the emergency stop pushbutton ES11with part
number 6044629.
This document is included with the following SICK part numbers (this document in all
available language versions):
8022327
2 ABOUT THIS DOCUMENT
4O P E R A T I N G I N S T R U C T I O N S | ES11 8022342/2017-12-15 | SICK
Subject to change without notice
3 On safety
Read these operating instructions carefully and keep them in a safe place.
The operating instructions are to be provided to the person who is installing the emer‐
gency stop pushbutton.
DANGER
Always note and follow the warnings below!
•Before starting the installation, electrically isolate system and device!
•Emergency stop pushbuttons provide a personnel protection function. Incorrect
installation or manipulation can result in serious injuries!
•Emergency stop pushbuttons are not allowed to be bypassed, removed or ren‐
dered ineffective in any other manner!
•Incorrect installation or tampering can result in damage to the machine and work‐
piece!
•The emergency stop function is not allowed to be used as a replacement for pro‐
tective measures or other safety functions, instead it should be designed as an
additional protective measure.
•The emergency stop function is not allowed to degrade the effectiveness of protec‐
tive devices or other devices with safety functions.
•Based on a risk analysis, the designer must ensure that the emergency stop
achieves the required level of safety (SIL, SILCL or PL) in combination with control
system.
3.1 Application
The national/international rules and regulations apply to the installation, commission‐
ing, use and periodic technical inspections of the emergency stop pushbuttons, in par‐
ticular:
•Machinery Directive 2006/42/EC
•safety regulations
•work safety regulations and safety rules
Manufacturers and operators of the machine on which the protective devices are used
are responsible for obtaining and observing all applicable safety regulations and rules.
Correct use includes observance of the applicable requirements on installation and
operation, in particular:
•EN 60947-5-1
•EN 60947-5-5
•EN ISO 13849-1
•EN ISO 13850
•EN 61508-1
•EN 60204-1
Correct use also includes the regular monitoring of the protective device by specialist
personnel.
ON SAFETY 3
8022342/2017-12-15 | SICK O P E R A T I N G I N S T R U C T I O N S | ES11 5
Subject to change without notice
4 Product description
The emergency stop pushbutton has the following product characteristics:
•Emergency stop button, not illuminable
•Reset button, illuminable
•Plug, M12, 8-pin
•Compact housing
4.1 Items supplied
•Emergency stop pushbutton
•Retaining clip
•Blue “RESET” cover (Note: Only press on after mounting!)
Other mounting material (screws, dowels, sliding nut) not included.
4.2 Function
•actuate: pressing the emergency stop button
•unlock: turning the emergency stop button
•reset: pressing the reset button
4 PRODUCT DESCRIPTION
6O P E R A T I N G I N S T R U C T I O N S | ES11 8022342/2017-12-15 | SICK
Subject to change without notice
5 Mounting
DANGER
Mount the emergency stop pushbutton such that it can be reached easily!
The emergency stop pushbutton is intended to be mounted so it is vertical (connecting
cable down or up).
How to mount the emergency stop pushbutton (see figure 1):
bMounting on profile rail: Insert sliding nut in profile (sliding nut not included).
Or
Wall mounting: Drill two mounting holes in the mounting plate.
bFasten retaining clip.
bFit housing to the side of the retaining spring, pull against spring pressure and
press on. The emergency stop pushbutton engages.
bPress “RESET” cover onto reset button, with label correctly positioned so it is legi‐
ble, until it engages.
bConnect connecting cable to the connection plug. Pay attention to the permissible
electrical and mechanical data (see "Technical specifications", page 14):
Figure 1: Mounting of the emergency stop pushbutton (screws and sliding nut not included)
MOUNTING 5
8022342/2017-12-15 | SICK O P E R A T I N G I N S T R U C T I O N S | ES11 7
Subject to change without notice
6 Connection
Table 3: Pin assignment ES11 emergency stop pushbutton
Pin Assignment
3/4 Normally closed contact 1
7/8 Normally closed contact 2
5 LED+ (reset)
6 LED– (reset)
1/2 Normally open contact (reset)
6 CONNECTION
8O P E R A T I N G I N S T R U C T I O N S | ES11 8022342/2017-12-15 | SICK
Subject to change without notice
7 Tests before the initial commissioning
Mechanical functional check
•Are there any signs of damage to the exterior of the emergency stop pushbutton?
•Is the emergency stop pushbutton’s housing securely engaged on the retaining
clip?
•Is the connecting cable securely fastened?
•Does the emergency stop button engage on actuation and can it be released again
by turning?
Electrical functional check:
bStart the machine.
bActuate the emergency stop button.
DANGER
Thoroughly check machine stop!
bCheck whether the machine stops on the actuation of the emergency stop
button.
bUnlock emergency stop button.
bActuate reset button.
Check whether the protective device has been reset.
TESTS BEFORE THE INITIAL COMMISSIONING 7
8022342/2017-12-15 | SICK O P E R A T I N G I N S T R U C T I O N S | ES11 9
Subject to change without notice
8 Periodic technical inspections
Make regular checks to ensure correct, long-term function. The inspection interval is to
be defined by the machine designer based on the risk assessment. However, it is rec‐
ommended the responsible safety officer triggers the emergency stop pushbutton at
least once a year for test purposes and to check for correct function:
•mechanical and electrical function check as per chapter "Tests before the initial
commissioning", page 9
•no tampering or damage apparent
•no loose connections
8 PERIODIC TECHNICAL INSPECTIONS
10 O P E R A T I N G I N S T R U C T I O N S | ES11 8022342/2017-12-15 | SICK
Subject to change without notice
Dieses Handbuch passt für folgende Modelle
2
Inhaltsverzeichnis
Andere SICK Schalten Handbücher
SICK
SICK i11s Bedienungsanleitung
SICK
SICK i10R Bedienungsanleitung
SICK
SICK WSU 26/2 Stücklistenhandbuch
SICK
SICK PBS plus Bedienungsanleitung
SICK
SICK T4000 Standard Bedienungsanleitung
SICK
SICK LFV 310 Bedienungsanleitung
SICK
SICK i110RP Bedienungsanleitung
SICK
SICK RE1 Bedienungsanleitung
SICK
SICK TR4 Bedienungsanleitung
SICK
SICK RE300 Bedienungsanleitung
SICK
SICK IME2S Bedienungsanleitung
SICK
SICK i110S Bedienungsanleitung
SICK
SICK LBV 331 Bedienungsanleitung
SICK
SICK i12S Bedienungsanleitung
SICK
SICK TR4 Bedienungsanleitung
SICK
SICK ES21 M12 contact Bedienungsanleitung
SICK
SICK i110P Bedienungsanleitung
SICK
SICK RE1 Bedienungsanleitung
SICK
SICK IQB2S Bedienungsanleitung
SICK
SICK SENSICK WT 36 Bedienungsanleitung
Beliebte Schalten Handbücher anderer Marken
Ruijie
Ruijie RG-PF2920 Series Installations- und Betriebsanleitung
Altinex
Altinex DA1914SX Bedienungsanleitung
MiLAN
MiLAN MIL-SM2401M Bedienungsanleitung
RJM
RJM MASTERMIND PBC/6X Bedienungsanleitung
Atlas
Atlas MMK-KVM8 Bedienungsanleitung
Cabletron Systems
Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung