SICK RE300 Bedienungsanleitung

OPERATING INSTRUCTIONS

RE300

Safety switches

Described product

RE300

Manufacturer

SICK AG

Erwin-Sick-Str. 1

79183 Waldkirch

Germany

Legal information

This work is protected by copyright. Any rights derived from the copyright shall be

reserved for SICK AG. Reproduction of this document or parts of this document is

only permissible within the limits of the legal determination of Copyright Law. Any modi‐

fication, abridgment or translation of this document is prohibited without the express

written permission of SICK AG.

The trademarks stated in this document are the property of their respective owner.

Original document

This document is an original document of SICK AG.

2O P E R A T I N G I N S T R U C T I O N S | RE300 8027267/1CZ3/2022-11-28 | SICK

Subject to change without notice

Contents

1 About this document........................................................................ 4

2 On safety............................................................................................. 5

2.1 Qualified safety personnel....................................................................... 5

2.2 Application................................................................................................ 5

2.3 Correct use................................................................................................ 5

2.4 General safety notes and protective measures...................................... 6

3 Function description.......................................................................... 7

3.1 Evaluating the switching signals.............................................................. 7

4 Mounting............................................................................................. 8

5 Electrical installation........................................................................ 11

6 Commissioning.................................................................................. 12

6.1 Tests before the initial commissioning.................................................... 12

6.2 Periodic technical checks......................................................................... 12

6.2.1 Regular examinations.............................................................. 12

6.2.2 Inspection by qualified safety personnel............................... 13

7 Maintenance...................................................................................... 14

8 Disposal.............................................................................................. 15

9 Technical data.................................................................................... 16

9.1 Data sheet................................................................................................. 16

9.2 Dimensional drawings.............................................................................. 17

10 Conformities and certificates.......................................................... 18

10.1 EU declaration of conformity.................................................................... 18

10.2 UK declaration of conformity................................................................... 18

CONTENTS

8027267/1CZ3/2022-11-28 | SICK O P E R A T I N G I N S T R U C T I O N S | RE300 3

Subject to change without notice

1 About this document

These operating instructions are original operating instructions.

These operating instructions are included with SICK part number 8011171 (all availa‐

ble languages of this document)

1 ABOUT THIS DOCUMENT

4O P E R A T I N G I N S T R U C T I O N S | RE300 8027267/1CZ3/2022-11-28 | SICK

Subject to change without notice

2 On safety

This chapter deals with your own safety and the safety of the equipment operators.

bPlease read this chapter carefully before working with the safety switch or with the

machine protected by the safety switch.

The national/international rules and regulations apply to the installation, commission‐

ing, use and periodic technical inspections of the safety switch, in particular the work

safety regulations and safety rules.

2.1 Qualified safety personnel

The switch must be mounted, installed and commissioned only by qualified safety

personnel. Qualified safety personnel are defined as persons who …

•have undergone the appropriate technical training

and

•who have been instructed by the responsible machine operator in the operation of

the machine and the current valid safety guidelines

and

•who have access to the operating instructions.

2.2 Application

Series RE300 safety switches are magnetically operated, non-contact safety switches.

In combination with a suitable safety-related evaluation unit, they protect movable

guards in the following way:

•The dangerous state of the machine can only be switched on when the guard is

closed.

•If the guard is opened while the machine is running, a stop command is triggered.

For the control this means:

•Activation commands that result in dangerous states are only allowed to become

effective if the guard is in the protective position.

•Dangerous states must have been terminated before the protective position is left.

Prior to the use of safety switches, a risk assessment must be performed on the

machine.

2.3 Correct use

The safety switch must be used only as defined in section "Application", page 5. The

safety switch must be used only on the machine where it has been mounted, installed

and initialized by qualified safety personnel in accordance with these operating instruc‐

tions.

The product may be used in safety functions.

All warranty claims against SICK AG are forfeited in the case of any other use, or

alterations being made to the safety switch, even as part of its mounting or installation.

Correct use includes also regular inspection of the guard by qualified safety personnel

in accordance with section 6.2.

ON SAFETY 2

8027267/1CZ3/2022-11-28 | SICK O P E R A T I N G I N S T R U C T I O N S | RE300 5

Subject to change without notice

2.4 General safety notes and protective measures

Safety switches provide a protection function for persons. Incorrect installation or

manipulation can result in serious injuries.

DANGER

Safety switches are not allowed to be bypassed, turned away or made ineffective in any

other manner.

2 ON SAFETY

6O P E R A T I N G I N S T R U C T I O N S | RE300 8027267/1CZ3/2022-11-28 | SICK

Subject to change without notice

3 Function description

The safety switch is magnetically coded. Its contacts are operated by the related actua‐

tor RE300-KA. The safety switches are equipped with contacts:

The switching signals are sampled by a suitable safety-related evaluation unit, e.g. a

safe programmable logic controller.

3.1 Evaluating the switching signals

On integrating magnetic safety switches into suitable safe evaluation units, the follow‐

ing must be taken into account:

•The user is responsible for ensuring that the device is safely incorporated into

a safe overall system. This involves validating the overall system according to

specifications such as those defined in EN ISO 13849-2.

•On the detection of a fault related to the safety switch, the safe evaluation unit

must shut down and adopt a locked state.

•Both contacts must switch opposite to each other with a maximum discrepancy

time of 1500 ms; this time is to be monitored using the evaluation electronics.

•On the connection of the safety switch to a safe evaluation unit, the input module

should be configured such that the discrepancy time set has no effect on the

shutdown time for the evaluation (typical configuration “provide 0”). If this is not

possible, the calculation must take into account the response time.

RE300

1 blu

2 yel

3 grn

4 red

Figure 1: Wire colours RE300-DA..

Contact assignments Function

1 blue/4 red NO contact

3 yellow/4 green NC contact

In the unactivated state (output state OFF), the NO contact 1 (blue)/4 (red) is open and

the NC contact 2 (yellow)/3 (green) is closed (see figure X).

Max. 1500 ms

Input behaviour

Output behaviour

Figure 2: Switching behaviour (unactivated)

FUNCTION DESCRIPTION 3

8027267/1CZ3/2022-11-28 | SICK O P E R A T I N G I N S T R U C T I O N S | RE300 7

Subject to change without notice

4 Mounting

WARNING

Mounting is only allowed to be performed by qualified safety personnel.

bPay attention to EN ISO 14119 on mounting the safety switch and the actuator.

bPay attention to EN ISO 14119 on reducing possible ways of bypassing an inter‐

locking device.

Figure 3: Protection example for bypassing a magnetic safety switch in compliance with EN ISO

14119

bDo not mount safety switches in an environment with interfering magnetic fields.

bNote the possible operating positions.

4 MOUNTING

8O P E R A T I N G I N S T R U C T I O N S | RE300 8027267/1CZ3/2022-11-28 | SICK

Subject to change without notice

4–4–15 150 mm

OFF

Misalignment tolerance on the sides [mm]

Sensor - 

actuator distance [mm]

Figure 4: Alignment of sensor and actuator

bFit safety switch and actuating element such that they do not touch each other:

minimum distance between the front faces with the guard closed 1mm.

Stop

Min. 1 mm

Figure 5: Mounting example for safety switch and actuator

bFit an additional stop and guide for the moving part of the protective device

(figure 5).

bMount the actuator on guard so that it cannot be detached (e.g. using safety

screws).

bTighten self-locking screws to 1.0 Nm.

bDo not use anaerobic adhesive (e.g. Loctite) to lock the screws, as this will attack

the plastic housing.

MOUNTING 4

8027267/1CZ3/2022-11-28 | SICK O P E R A T I N G I N S T R U C T I O N S | RE300 9

Subject to change without notice

bMinimum distance between two adjacent magnetic safety switches: 25 mm. On

swivelling doors the actuator is to be fitted to the closing edge.

25 mm

Figure 6: Mounting example on swivelling doors

4 MOUNTING

10 O P E R A T I N G I N S T R U C T I O N S | RE300 8027267/1CZ3/2022-11-28 | SICK

Subject to change without notice

Andere Handbücher für RE300

Inhaltsverzeichnis

Andere SICK Schalten Handbücher

SICK

SICK i10R Bedienungsanleitung

SICK

SICK TR4 Bedienungsanleitung

SICK

SICK WI180C-IOA00 Bedienungsanleitung

SICK

SICK MSL Series Bedienungsanleitung

SICK

SICK WSU 26/2 Stücklistenhandbuch

SICK

SICK IN4000 Direct Bedienungsanleitung

SICK

SICK i110S Bedienungsanleitung

SICK

SICK T4000 Standard Bedienungsanleitung

SICK

SICK TBS Bedienungsanleitung

SICK

SICK L25 Bedienungsanleitung

SICK

SICK i110RP Bedienungsanleitung

SICK

SICK ES11 Bedienungsanleitung

SICK

SICK PAC50 Bedienungsanleitung

SICK

SICK ES11-SA1A4 Bedienungsanleitung

SICK

SICK T4000 Direct Unicode Bedienungsanleitung

SICK

SICK WLL190T-2 Bedienungsanleitung

SICK

SICK i10P Bedienungsanleitung

SICK

SICK STR1 Bedienungsanleitung

SICK

SICK LFV 330 Bedienungsanleitung

SICK

SICK T4000 Direct Unicode Bedienungsanleitung

SICK

SICK PBS Series Bedienungsanleitung

SICK

SICK i110H Bedienungsanleitung

SICK

SICK i150RP Bedienungsanleitung

SICK

SICK RE1 Bedienungsanleitung

Beliebte Schalten Handbücher anderer Marken

URC

URC Total Control MFS-8 Bedienungsanleitung

Azbil

Azbil HPQ-D11 Bedienungsanleitung

Sony

Sony DFS-900M Bedienungsanleitung

F&F

F&F SZR-277 Bedienungsanleitung

Shure

Shure UAMS/BK Bedienungsanleitung

Dräger

Dräger X-zone Switch Off Bedienungsanleitung

Asco

Asco Joucomatic 349 Series Bedienungsanleitung

BT Mini Hub Bedienungsanleitung

D-Link

D-Link DES-1226G Bedienungsanleitung

Johnson Controls

Johnson Controls FS80-C Bedienungsanleitung

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Bedienungsanleitung

MicroNet

MicroNet SP1200A Bedienungsanleitung

Ruijie

Ruijie RG-PF2920 Series Installations- und Betriebsanleitung

Altinex

Altinex DA1914SX Bedienungsanleitung

MiLAN

MiLAN MIL-SM2401M Bedienungsanleitung

RJM

RJM MASTERMIND PBC/6X Bedienungsanleitung

Atlas

Atlas MMK-KVM8 Bedienungsanleitung

Cabletron Systems

Cabletron Systems GIGAswitch GSR-16 Bedienungsanleitung