Siemens 986-88301A Bedienungsanleitung

Installation Instructions

Document No. 565-709

December 1, 2006

Andover InﬁnetDriver

These installation instructions only cover the

connection of the Andover Inﬁnet Driver to the

Andover system. For hardware installation of the

Modular Equipment Controller, see document number

565-570. For hardware installation of the Power

Open Processor, see document number 565-571.

Product Description

The Andover Inﬁnet Driver enables communication

between the APOGEE®Automation System and the

Andover network.

Product Numbers

986-88301A Andover Inﬁnet Driver, Open

Processor with RS-485 ALN

986-88301B Andover Inﬁnet Driver, Open

Processor with Ethernet ALN

986-88301C Andover Inﬁnet Driver, MEC

with RS-485 ALN, 8DI, 8DO,

8AI, 8AO, point expansion

support, HOA-ready

986-88301D Andover Inﬁnet Driver, MEC

with RS-485 ALN, 8DI, 8DO,

8AI, 8AO, point expansion

support, with HOA

986-88301E Andover Inﬁnet Driver, MEC

with RS-485 ALN, 8DI, 8DO,

8AI, 8AO, point expansion

support, modem, HOA-ready

986-88301F Andover Inﬁnet Driver, MEC

with RS-485 ALN, 8DI, 8DO,

8AI, 8AO, point expansion

support, modem, with HOA

986-88301G Andover Inﬁnet Driver, MEC

with Ethernet ALN, 8DI, 8DO,

8AI, 8AO, point expansion

support, HOA-ready

986-88301H AndoverInﬁnet Driver, MEC

with Ethernet ALN, 8DI, 8DO,

8AI, 8AO, point expansion

support, with HOA

Warning/Caution Notations

WARNING:

Personal injury/loss of life may occur if you

do not follow the procedures as speciﬁed.

CAUTION:

Equipment damage or loss of data may

occur if you do not follow the procedures

as speciﬁed.

Expected Installation Times

30 minutes.

Required Tools and Materials

• Flat-blade screwdriver (1/8-inch blade width).

• Wire strippers.

• Cabling and connectors. See the Connecting

the Andover Inﬁnet Driver to the Andover

Network section.

CAUTION:

Always wear an electro-static discharge

wrist strap and discharge accumulated

static before touching ﬁeld panel

components.

Prerequisites

• Driver hardware is installed according to its

respective installation instructions.

•FLNTerm

ination blocks installed, if any.

Depending on the type of installation, other

prerequisites may have to be completed.

Item Number: 565-709, Rev. AA Page 1 of 2

Document No. 565-709

Installation Instructions

December 1, 2006

Connecting the Andover Inﬁnet

Driver to the Andover Network

Follow these steps to connect the Andover Inﬁnet

Driver to the Andover network:

1. Make cables per diagram in Figure 1.

2. Connect cables per diagram in Figure 1.

DRIVER

SHLD

+-S

Infinet/Infinet II Device

(6xx, 8xx, 9xx)

To Other

Infinet/Infinet II

Devices

GW1400R1

FLN 1

Figure 1. Connecting the Andover Inﬁnet Driver to the Andover Network.

Information in this document is based on speciﬁcations believed correct at the time of publication. The right is reserved to make changes as

design improvements are introduced. Product or company names mentioned herein may be the trademarks of their respective owners.

Siemens Building Technologies, Inc. Your feedback is important to us. If you have Document No. 565-709

1000 Deerﬁeld Parkway comments about this document, please send Country of Origin: US

Buffalo Grove, IL 60089-4513 them to SBT_[email protected]. Page 2 of 2

U.S.A.

Dieses Handbuch passt für folgende Modelle

Andere Siemens Steuereinheit Handbücher

Siemens

Siemens SIRIUS ACT 3SU1400-1GE10-1AA0 Bedienungsanleitung

Siemens

Siemens SIRIUS Bedienungsanleitung

Siemens

Siemens 8DO Bedienungsanleitung

Siemens

Siemens SINUMERIK 808D Kurzanleitung

Siemens

Siemens SENTRON 7KM PAC 4DI/2DO Bedienungsanleitung

Siemens

Siemens SIMATIC NET CP 1243-1 DNP3 Merkblatt

Siemens

Siemens SIMATIC RF170C Bedienungsanleitung

Siemens

Siemens SIMATIC S7-1200 Stücklistenhandbuch

Siemens

Siemens SINAMICS G120 Datenblatt

Siemens

Siemens Simatic S7-1500 CPU 1512C-1 PN Bedienungsanleitung

Siemens

Siemens SIPROTEC PROFINET IO Bedienungsanleitung

Siemens

Siemens PSO+ Bedienungsanleitung

Siemens

Siemens 599-02015 Betriebsanleitung

Siemens

Siemens SINUMERIK 840D Merkblatt

Siemens

Siemens Milltronics BW500 Bedienungsanleitung

Siemens

Siemens CP-8000 Bedienungsanleitung

Siemens

Siemens SIMOTION Technisches Dokument

Siemens

Siemens SINUMERIK 840D sl Betriebsanleitung

Siemens

Siemens SINAMICS G130 Bedienungsanleitung

Siemens

Siemens EN100 Bedienungsanleitung

Siemens

Siemens PXC D Series Bedienungsanleitung

Siemens

Siemens SINAMICS G130 Bedienungsanleitung

Siemens

Siemens SINAMICS G120 Bedienungsanleitung

Siemens

Siemens 3SB5 Bedienungsanleitung

Beliebte Steuereinheit Handbücher anderer Marken

Festo

Festo Compact Performance CP-FB6-E Stücklistenhandbuch

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Bedienungsanleitung

JS Automation

JS Automation MPC3034A Bedienungsanleitung

JAUDT

JAUDT SW GII 6406 Series Kurzanleitung

Spektrum

Spektrum Air Module System Bedienungsanleitung

BOC Edwards

BOC Edwards Q Series Bedienungsanleitung

KHADAS

KHADAS BT Magic Bedienungsanleitung

Etherma

Etherma eNEXHO-IL Bedienungsanleitung

PMFoundations

PMFoundations Attenuverter Bedienungsanleitung

GEA

GEA VARIVENT Bedienungsanleitung

Walther Systemtechnik

Walther Systemtechnik VMS-05 Bedienungsanleitung

Altronix

Altronix LINQ8PD Montageanleitung

Eaton

Eaton Powerware Series Bedienungsanleitung

WAGO

WAGO 750-407/040-000 Bedienungsanleitung

Sony

Sony CCU-590 Bedienungsanleitung

Graco

Graco 25D614 Bedienungsanleitung

Task Force Tips

Task Force Tips YE-RF-900 Programmierhandbuch

Shini

Shini SPV-U Series Bedienungsanleitung