Siemens SIMATIC S7-1500R/H Bedienungsanleitung

CPU 1517H-3 PN (6ES7517-3HP00-0AB0)

SIMATIC

S7-1500R/H

CPU 1517H-3 PN

(6ES7517-3HP00-0AB0)

Equipment Manual

11/2019

A5E42011886

-AB

Preface

S7-1500R/H Documentation

Guide

Product overview

Connecting

Interrupts, diagnostics, error

messages and system

events

Technical specifications

Dimension drawing

Siemens AG

Digital Industri

Postfach 48 48

90026 NÜRNBERG

GERMANY

A5E42011886-AB

Ⓟ

10/2019 Subject to change

Legal information

Warning notice system

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent

damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert

symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are

graded according to the degree of danger.

DANGER

indicates that death or severe personal injury will result if proper precautions are not taken.

WARNING

indicates that death or severe personal injury may result if proper precautions are not taken.

CAUTION

indicates that minor personal injury can result if proper precautions are not taken.

NOTICE

indicates that property damage can result if proper precautions are not taken.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will

be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to

property damage.

Qualified Personnel

The product/system described in this documentation may be operated only by personnel qualified for the specific

task in accordance with the relevant documentation, in particular its warning notices and safety instructions.

Qualified personnel are those who, based on their training and experience, are capable of identifying risks and

avoiding potential hazards when working with these products/systems.

Proper use of Siemens products

Note the following:

WARNING

Siemens products may only be used for the applications described in the catalog and in the relevant technical

documentation. If products and components from other manufacturers are used, these must be recommended

or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and

maintenance are required to ensure that the products operate safely and without any problems. The permissible

ambient conditions must be complied with. The information in the relevant documentation must be observed.

Trademarks

All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication

may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and software

described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the

information in this publication is reviewed regularly and any necessary corrections are included in subsequent

editions.

CPU 1517H-3 PN (6ES7517-3HP00-0AB0)

Equipment Manual, 11/2019, A5E42011886-AB 3

Preface

Purpose of the documentation

This manual supplements the system manual of the S7-1500R/H redundant system and the

function manuals. This manual contains a description of the module-specific information. The

system-related functions are described in the system manual. All system-spanning functions

are described in the function manuals.

The information provided in this manual and the system manual enables you to commission

the CPU 1517H-3 PN.

Conventions

STEP 7: In this documentation, "STEP 7" is used as a synonym for all versions of the

configuration and programming software "STEP 7 (TIA Portal)".

Please also observe notes marked as follows:

Note

A note contains important information on the product described in the documentation, on

the

handling of the product or on the section of the

documentation to which particular attention

should be paid.

Recycling and disposal

For environmentally friendly recycling and disposal of your old equipment, contact a certified

electronic waste disposal company and dispose of the equipment according to the applicable

regulations in your country.

Preface

CPU 1517H-3 PN (6ES7517-3HP00-0AB0)

4Equipment Manual, 11/2019, A5E42011886-AB

Security information

Siemens provides products and solutions with industrial security functions that support the

secure operation of plants, systems, machines and networks.

In order to protect plants, systems, machines and networks against cyber threats, it is

necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial

security concept. Siemens’ products and solutions constitute one element of such a concept.

Customers are responsible for preventing unauthorized access to their plants, systems,

machines and networks. Such systems, machines and components should only be

connected to an enterprise network or the internet if and to the extent such a connection is

necessary and only when appropriate security measures (e.g. firewalls and/or network

segmentation) are in place.

For additional information on industrial security measures that may be implemented, please

visit (https://www.siemens.com/industrialsecurity).

Siemens' products and solutions undergo continuous development to make them more

secure. Siemens strongly recommends that product updates are applied as soon as they are

available and that the latest product versions are used. Use of product versions that are no

longer supported, and failure to apply the latest updates may increase customers' exposure

to cyber threats.

To stay informed about product updates, subscribe to the Siemens Industrial Security RSS

Feed visit (https://www.siemens.com/industrialsecurity).

Siemens Industry Online Support

You can find current information on the following topics quickly and easily here:

●Product support

All the information and extensive know-how on your product, technical specifications,

FAQs, certificates, downloads, and manuals.

●Application examples

Tools and examples to solve your automation tasks – as well as function blocks,

performance information and videos.

●Services

Information about Industry Services, Field Services, Technical Support, spare parts and

training offers.

●Forums

For answers and solutions concerning automation technology.

●mySupport

Your personal working area in Industry Online Support for messages, support queries,

and configurable documents.

This information is provided by the Siemens Industry Online Support in the Internet

(https://support.industry.siemens.com).

Preface

CPU 1517H-3 PN (6ES7517-3HP00-0AB0)

Equipment Manual, 11/2019, A5E42011886-AB 5

Industry Mall

The Industry Mall is the catalog and order system of Siemens AG for automation and drive

solutions on the basis of Totally Integrated Automation (TIA) and Totally Integrated Power

(TIP).

You can find catalogs for all automation and drive products on the Internet

(https://mall.industry.siemens.com).

CPU 1517H-3 PN (6ES7517-3HP00-0AB0)

6Equipment Manual, 11/2019, A5E42011886-AB

Table of contents

Preface ...................................................................................................................................................... 3

1 S7-1500R/H Documentation Guide............................................................................................................ 7

2 Product overview ....................................................................................................................................... 9

2.1 New functions in firmware version V2.8................................................................................... 9

2.2 Configuration and operating principle .................................................................................... 11

2.3 Hardware properties .............................................................................................................. 14

2.4 Firmware functions................................................................................................................. 17

2.5 Operator controls and display elements ................................................................................ 19

2.5.1 Front view of the CPU with closed front flap.......................................................................... 19

2.5.2 Front view of the CPU without front flaps .............................................................................. 21

2.5.3 Rear view of the CPU ............................................................................................................ 22

2.5.4 Bottom view............................................................................................................................ 23

2.6 Mode selector......................................................................................................................... 24

3 Connecting .............................................................................................................................................. 25

3.1 Terminal assignment.............................................................................................................. 25

4 Interrupts, diagnostics, error messages and system events .................................................................... 29

4.1 Status and error display of the CPU ...................................................................................... 29

5 Technical specifications........................................................................................................................... 35

A Dimension drawing .................................................................................................................................. 44

A.1 Dimension drawing ................................................................................................................ 44

CPU 1517H-3 PN (6ES7517-3HP00-0AB0)

Equipment Manual, 11/2019, A5E42011886-AB 7

S7-1500R/H Documentation Guide

The documentation for the redundant S7-1500R/H system is divided into three areas.

This division enables you to access the specific content you require.

Basic information

The System Manual and Getting Started describe in detail the configuration, installation,

wiring and commissioning of the redundant S7-1500R/H system. The STEP 7 online help

supports you in the configuration and programming.

Device information

Product manuals contain a compact description of the module-specific information, such as

properties, wiring diagrams, characteristics and technical specifications.

General information

The function manuals contain detailed descriptions on general topics regarding the

redundant S7-1500R/H system, e.g. diagnostics, communication.

You can download the documentation free of charge from the Internet

(https://support.industry.siemens.com/cs/ww/en/view/109742691).

Changes and supplements to the manuals are documented in a Product Information.

You can download the product information free of charge from the Internet

(https://support.industry.siemens.com/cs/ww/en/view/109742691).

S7-1500R/H Documentation Guide

CPU 1517H-3 PN (6ES7517-3HP00-0AB0)

8Equipment Manual, 11/2019, A5E42011886-AB

S7-1500/ET 200MP Manual Collection

The S7-1500/ET 200MP Manual Collection contains the complete documentation on the

redundant S7-1500R/H system gathered together in one file.

You can find the Manual Collection on the Internet

(https://support.industry.siemens.com/cs/ww/en/view/86140384).

SIMATIC S7-1500 comparison list for programming languages

The comparison list contains an overview of which instructions and functions you can use for

which controller families.

You can find the comparison list on the Internet

(https://support.industry.siemens.com/cs/ww/en/view/86630375).

"mySupport"

With "mySupport", your personal workspace, you make the best out of your Industry Online

Support.

In "mySupport", you can save filters, favorites and tags, request CAx data and compile your

personal library in the Documentation area. In addition, your data is already filled out in

support requests and you can get an overview of your current requests at any time.

You must register once to use the full functionality of "mySupport".

You can find "mySupport" on the Internet (https://support.industry.siemens.com/My/ww/en/).

Application examples

The application examples support you with various tools and examples for solving your

automation tasks. Solutions are shown in interplay with multiple components in the system -

separated from the focus on individual products.

You will find the application examples on the Internet

(https://support.industry.siemens.com/sc/ww/en/sc/2054).

CPU 1517H-3 PN (6ES7517-3HP00-0AB0)

Equipment Manual, 11/2019, A5E42011886-AB 9

Product overview

2.1 New functions in firmware version V2.8

This section contains an overview of the most important new firmware functions of the CPU

since the last edition of the manual.

New functions of the CPU in firmware version V2.8

New functions

Customer benefits

Where can I find information?

Download modified user

program in RUN-

Redundant system state

You can download a modified user program into the

R/H CPUs in the RUN-Redundant system state.

Advantage: The redundant system will remain con-

sistently in the RUN-Redundant system state during

the change to the user program. The system state

will not switch to RUN-Solo or SYNCUP.

S7-1500R/H System Manual

(https://support.industry.siemens.com/c

s/ww/en/view/109754833)

Backing up the configura-

tion of the S7-1500R/H

redundant system in

runtime

You do not have to interrupt the process during a

backup while the plant is running.

Uninterrupted plant operation avoids high restart and

material costs.

Switched S1 device The "Switched S1 device" function of the CPU ena-

bles operation of standard IO devices in the S7-

1500R/H redundant system.

Testing with breakpoints When testing with breakpoints, you run a program

from breakpoint to breakpoint in the STARTUP

(startup OB) or RUN-Solo system state. Testing with

breakpoints provides you with the following ad-

vantages:

•Testing SCL and STL program code with the help

of breakpoints

•Localization of logic errors step by step

•Simple and quick analysis of complex programs

prior to actual commissioning

•Recording of current values within individual exe-

cuted loops

•Using breakpoints for program validation is also

possible in SCL or STL networks within LAD/FBD

blocks.

Andere Handbücher für SIMATIC S7-1500R/H

Inhaltsverzeichnis

Andere Siemens Controller Handbücher

Siemens

Siemens SAS61.33U Betriebsanleitung

Siemens

Siemens 3VA9 Series Bedienungsanleitung

Siemens

Siemens CP-8000 Bedienungsanleitung

Siemens

Siemens OpenAir E Series Bedienungsanleitung

Siemens

Siemens ESP200 Bedienungsanleitung

Siemens

Siemens SIKOSTART 3RW35 Handbuch

Siemens

Siemens scalance WLC711 Administratorhandbuch

Siemens

Siemens ERTEC200 Bedienungsanleitung

Siemens

Siemens LCM-OAVS 570-804PA Bedienungsanleitung

Siemens

Siemens SIMATIC NET SCALANCE WLC711 Bedienungsanleitung

Siemens

Siemens SIMODRIVE base line A Bedienungsanleitung

Siemens

Siemens SIDOOR ATE500E Bedienungsanleitung

Siemens

Siemens 3RE10 Series Bedienungsanleitung

Siemens

Siemens N 543D31 Bedienungsanleitung

Siemens

Siemens Micromaster Profibus Bedienungsanleitung

Siemens

Siemens OpenAir GCA Series Betriebsanleitung

Siemens

Siemens GDA Series Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Siemens

Siemens SIRIUS 3RA1.5 Bedienungsanleitung

Siemens

Siemens instabus Series Bedienungsanleitung

Siemens

Siemens LOGO! 0BA7 Bedienungsanleitung

Siemens

Siemens POS8.4420/109 Bedienungsanleitung

Siemens

Siemens Simatic S7-300 Bedienungsanleitung

Siemens

Siemens SIMATIC S5-100U Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch

Regin

Regin CORRIGO L10 Bedienungsanleitung