Siemens Desigo PXC5.E003 Bedienungsanleitung

A6V11646020_en--_b

Smart Infrastructure

2020-07-10

Desigo™

System controller

PXC5.E003

Feature overview

●System controller to integrate BACnet MS/TP and Modbus devices

●Communication BACnet/IP

●2-port Ethernet switch for low-cost cabling

●Integration of Modbus data points via RTU and/or TCP

●Integration of BACnet MS/TP devices

●WLAN interface for engineering and commissioning

●Operating voltage AC 24 V

●Mounted on standard rails or on the wall

●Plug-in screw terminal blocks

Siemens Schweiz AG

A6V11646020_en--_b

Smart Infrastructure

2020-07-10

Functions

Freely programmable system controller.

●System functions (alarming, scheduling, trending, access protection with individually

definable user profiles and categories)

●System controller for system networks with PXC5, PXC4 and DXR controllers over

BACnet/IP or BACnet MS/TP

●Integrates third-party devices and systems

●Generic object viewer for data points of several assigned devices via embedded web

interface

●Generic object viewer for local data points and assigned devices via embedded web

interface

●Engineering and commissioning with the ABT Site Tool using graphical function charts

●BACnet communication on IP or MS/TP, in compliance with the BACnet standard

including B-BC profile (Rev. 1.15)

●Wireless connection for engineering and commissioning

●Cloud connectivity for remote access

●Integration of Modbus data points via RTU and/or TCP

Type summary

Type

Order number

Description

PXC5.E003

S55375-C103

System controller to integrate

●up to 500 Modbus data points (via RTU and/or TCP)

●up to 30 devices in a field level network BACnet/MSTP

Equipment combinations

Desigo Control Point

Description

Type

Data sheet

BACnet touch panels with integrated Web server

7.0 "

10.1 "

15.6 "

PXM30.E

PXM40.E

PXM50.E

A6V11664137

Touch panels clients with data storage in Web-server PXG3.Wx00-1

7.0 "

10.1 "

15.6 "

PXM30-1

PXM40-1

PXM50-1

A6V11664139

BACnet/IP Web server with standard functionality

BACnet/IP Web server with extended functionality

PXG3.W100-1

PXG3.W200-1

A6V10808336

Siemens Schweiz AG

A6V11646020_en--_b

Smart Infrastructure

2020-07-10

Technical and mechanical design

The compact build allows for mounting the devices on a standard rail or a wall.

5678

910

11 12 13 14

15 16

Date/Series

S/N

WLAN

Default

10 11

Service button (network login and WLAN on/off)

2-port Ethernet switch with 2 LEDs per port for

display purposes

Plug-in terminal block with screw terminals

KNX, PL-link, for future use

Plug-in terminal block with screw terminals

Power supply

Plug-in terminal blocks with screw terminals

Digital input, for future use

Plug-in terminal block with screw terminals

M-bus, for future use

Plug-in terminal block with screw terminals

COM1 / COM2 (MS/TP or Modbus)

DIP switches for bus termination and polarization

COM1 / COM2

Slider for mounting on standard mounting rails

Eyelets for cable ties

Plastic housing

Holes for wall mounting

Front cover

Date / Series and Serial number

LEDs for communication and state

QR code for default WLAN access

Description see Technical data

LED displays

Activity

LED

Color

Activity

Function

Ethernet

1/2

Green

Continuously ON

Continuously OFF

Flashing

Link active

No connection

Network traffic

Yellow

Continuously ON

Continuously OFF

Link 100 Mbps

Link 10 Mbps

RUN

Green

Continuously ON

Continuously OFF

Flashing

Device operational

Device not operational

Start-up or program halted

Red

Continuously OFF

Continuously ON

Rapid flashing

HW or SW fault

Firmware or application missing/corrupted

Blue

Continuously ON

Continuously OFF

Connection to the cloud OK

No connection to the cloud

BAT

Red

Continuously OFF

Continuously ON

Optional battery OK

Optional battery empty - replace

COM…

Yellow

Flashing

Continuously OFF

Communication

No communication to subsystem

KNX

(for future

use)

Yellow

SVC

Red

Continuously OFF

Flashing

Device is not configured

Flashing per wink

command

Identification of the device after receipt of

wink command

Siemens Schweiz AG

A6V11646020_en--_b

Smart Infrastructure

2020-07-10

Activity

LED

Color

Activity

Function

2s 1s

5 Hz 5 Hz

2s 1s

WLAN

Blue

Steady OFF

Steady ON

Flashing

WLAN inactive

WLAN active and at least one WLAN client

connected

WLAN active and no WLAN client

connected

Service

button

Short press (< 1 s)

Long press (> 3 s)

Identification in the network

Enable/disable WLAN

WLAN is disabled automatically after 10 min

if no client is connected

As per description

Do the following to reset the device to

factory state:

1. Power off the device.

2. Power on the device.

3. Wait until all LEDs light up and turn off

again, then press the Service button.

4. Keep the Service button pressed until

all LEDs light up, then release the

button.

All LEDs go off, the device restarts.

5. Wait until the device has fully started –

unconfigured (green RUN LED and red

SVC LED are flashing)

Product documentation

Related documents such as the environmental declarations, CE declarations, etc., can be

downloaded from the following Internet address:

https://siemens.com/bt/download

Siemens Schweiz AG

A6V11646020_en--_b

Smart Infrastructure

2020-07-10

Notes

Safety

CAUTION

National safety regulations

Failure to comply with national safety regulations may result in personal injury and

property damage.

●Observe national provisions and comply with the appropriate safety regulations.

●This equipment is intended only for use in a restricted access area (lockable cabinet)

●This equipment is not suitable for use in locations where children are likely to be

present.

●Conductors with a cross-section of 0.5 mm2 (AWG24) or greater shall comply with the

requirements of IEC 60332-1-2 and IEC 60332-1-3 or IEC TS 60695-11-21.

Mounting position and ambient temperature

The devices can be snapped onto standard rails or screwed onto a flat surface.

Plug-in screw terminals connect power and interfaces.

Ambient temperature -5...50 °C (23...122 °F)

Ambient temperature -5...45 °C (23...113 °F)

●Wall, horizontal

–From left to right

–From right to left

●Overhead

●Wall, vertically

–From top to bottom

–From bottom to top

●On a horizontal surface

CAUTION

Risk of overheating for failure to comply with ambient temperature

Burning and damage to the device

●Ensure sufficient ventilation to comply with the permissible ambient temperature within

the panel or installation box. The temperature must be at least 10 K (18° F) lower

outside the installation box.

Disposal

The device is considered an electronic device for disposal in accordance

with the European Guidelines and may not be disposed of as domestic

garbage.

●Dispose of the device through channels provided for this purpose.

●Comply with all local and currently applicable laws and regulations.

●Dispose of empty batteries in designated collection points.

Siemens Schweiz AG

A6V11646020_en--_b

Smart Infrastructure

2020-07-10

Technical data

Power supply

Operating voltage (24 V~, ⏊, )

AC 24 V -15 / +20 % (SELV / PELV) or

AC 24 V Class 2 (US)

48…63 Hz

Functional ground (US)

Functional earth

The terminal for the functional ground must be

connected on the installation side with the building

grounding system (PE).

Screw terminals for wire cross sections up to

Max. 2.5 mm2(14 AWG)

Internal fusing

3.15 A irreversible / non-replaceable

External supply line fusing (EU)

Non-renewable fuse max. 10 A slow-blow

circuit breaker max. 13 A

Tripping characteristic B, C, D per EN 60898

Power supply with current limitation of max. 10 A

Power consumption (for transformer planning)

Base load

With M-Bus, with KNX

12 VA / 0.5 A

19 VA / 0.8 A

Function data

Hardware information

Processor

NXP i.MX8 DualX

Storage

1 GByte RAM

8 GByte eMMC

Data backup in the event of power failure

Energy reserve (Supercap) to support real-time clock (7 days).

Energy reserve can be extended to min. 1 month using optional battery CR2032

(Battery safety requirement and specification for CR2032 according to IEC 60086-4 or UL1642.

Battery must be rated for ambient temperature 70 °C (158 °F))

Data available if stored to flash memory. Occurs every 5 minutes.

Interfaces

Ethernet interface

Plug

2 x RJ45, shielded

Interface type

10Base-T / 100Base-TX, IEEE 802.3 compatible

Bit rate

10/100 Mbps, autosensing

Protocol

BACnet on UDP/IP and HTTPS on TCP/IP

Cabling (in-house cabling only), cable type

10 Mbps: Min. CAT3, shielded cable is recommended

100 Mbps: Min. CAT5, shielded cable is recommended

Cable length

Max. 100 m (330 ft)

Screw terminals, plug-in

Cu-wire or Cu-strand with wire end sleeve

1 x 0.6 mm ∅ to 2.5 mm2(22 to 14 AWG)

or 2 x 0.6 mm ∅ to 1.0 mm2(22 to 18 AWG)

Cu-strand without wire end sleeve

1 x 0.6 mm ∅ to 2.5 mm2(22 to 14 AWG)

or 2 x 0.6 mm ∅ to 1.5 mm2(22 to 16 AWG)

Siemens Schweiz AG

A6V11646020_en--_b

Smart Infrastructure

2020-07-10

Screw terminals, plug-in

Stripping length

6...7.5 mm (0.24...0.29 in)

Screwdriver

Slot screws, screwdriver size 1

Max. tightening torque

0.6 Nm (0.44 lb ft)

The two COM interfaces can be used either for Modbus or for MS/TP, according to

configuration.

Modbus RTU interface

Interface type

EIA-485, electrically isolated

Baud rate

1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200

(depending on the configuration)

Internal bus termination

120 Ohm, switchable with DIP switch

Internal bus polarization

270 Ohm pull-up/pull-down resistances, switchable with

DIP switch

Cabling (in-house cabling only)

Cable length

3-wire cable

Max. 1000 m (3300 ft)

Protection

Short-circuit proof

Protection against faulty wiring with AC 24 V

BACnet MS/TP interface

Interface type

EIA-485, electrically isolated

Baud rate

9600, 19200, 38400, 57600, 76800, 115200 (depending

on the configuration)

Internal bus termination

120 Ohm, switchable with DIP switch

Internal bus polarization

270 Ohm pull-up/pull-down resistances, switchable with

DIP switch

Cabling (in-house cabling only)

Distance between 2 devices

Length of the MS/TP line

3-wire cable, shielded

Max. 500 m (1650 ft)

Max. 1000 m (3300 ft)

Protection

Short-circuit proof

Protection against faulty wiring with AC 24 V

WLAN interface

Interface type

Wireless access point

Supported standards

Frequency band

WLAN channels

Maximum radio-frequency power

IEEE 802.11b/g/n

2.4…2.462 GHz

1…11

16.4 dBm

Distance (unobstructed field)

Min. 5 m (16 ft)

Device pairing

Activation / Deactivation with service button

Automatic switch off after 10 minutes if no WLAN-client

is connected.

Optionally, for cyber security reasons, the WLAN can be

permanently disabled via configuration.

Default SSID and WLAN password: Scan the QR code.

It will show something like WIFI:S:PXC5.E003_0000550;T:WPA;P:1400052738;;

Then SSID = PXC5.E003_0000550 and password = 1400052738

Determine manually: Use the information from the Date/Series/SN block It will show something like:

Date/Series: 20190423A0000550

S/N: 1400052738

SSID = <ASN>_<Running number after the series letter> and password = <S/N>

Siemens Schweiz AG

A6V11646020_en--_b

Smart Infrastructure

2020-07-10

Conformity

Ambient conditions and protection classification

Classification as per EN 60730

Automatic action

Control function

Degree of pollution

Overvoltage category

Type 1

Class A

III

Design

Suitable for use in protection class I or II systems

Degree of protection of housing to EN 60529

Front parts in DIN cut-out

Terminal part

IP30

IP20

Climatic ambient conditions

●Storage / Transport (packaged for transport) as per

IEC EN 60721-3-2

●Operation as per IEC/EN 60721-3-3

●Class 1K22 / 2K21

Temperature -25...70 °C (-13...158 °F)

Air humidity 5...95 % (non-condensing)

●Class 3K22

Temperature -5...50 °C (23...122 °F)

(for details see chapter Mounting)

Air humidity 5...95 % (non-condensing)

Mechanical ambient conditions

●Transport per IEC/EN 60721-3-2

●Operation as per IEC/EN 60721-3-3

●Class 2M11

●Class 3M11

Standards, directives and approvals

Product standards

EN 60730-1, EN 62368-1

Product family standard

EN 50491-x

Electromagnetic compatibility (EMC)

For residential, commercial, and

industrial environments

EU conformity (CE)

See CE declaration 1)

EAC compliance

Eurasian compliance

RCM conformity

See RCM declaration 1)

UL/cUL approbation (US / Canada)

UL916; http://ul.com/database

CSA certification

C22.2, http://csagroup.org/services-industries/product-

listing

FCC

CFR 47 Part 15 Class B

BACnet.

B-BC

Environmental compatibility 1)

The product environmental declaration 1) contains data

on environmentally compatible product design and

assessments (RoHS compliance, materials

composition, packaging, environmental benefit,

disposal).

1) Documents can be downloaded at http://siemens.com/bt/download.

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

●Reorient or relocate the receiving antenna.

●Increase the separation between the equipment and receiver.

Siemens Schweiz AG

A6V11646020_en--_b

Smart Infrastructure

2020-07-10

●Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

●Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC rules. Operation is subject to the following two

conditions:

1. This device may not cause harmful interference, and

2. this device must accept any interference received, including interference that may cause

undesired operation

FCC Caution: Changes or modifications not expressly approved by Siemens Switzerland

Ltd. could void the user’s authority to operate the equipment. United States representative

https://new.siemens.com/us/en/products/buildingtechnologies/home.html

Industry Canada statement

This device complies with ISED’s licence-exempt RSSs. Operation is subject to the following

two conditions:

1. This device may not cause interference, and

2. this device must accept any interference received, including interference that may cause

undesired operation.

Radio frequency radiation exposure Information for USA and Canada

This equipment complies with FCC and IC radiation exposure limits set forth for an

uncontrolled environment.

This equipment should be installed and operated with a minimum distance of 20 cm (8 in)

between the radiator and your body.

This transmitter must not be co-located or operated in conjunction with any other antenna or

transmitter.

Housing

Color top/bottom

RAL 7035 (light grey) / RAL 7016 (anthracite grey)

Dimensions

per DIN 43880, see dimensions

Weight without/with packaging

351 g / 391 g

Connection terminals

65 66 67 68 69 70 71 72

34 5 6 7 10 11

Terminal

Symbol

Description

1, 2

2 x RJ45 interface for Ethernet with switch

3, 4

KNX

KNX PL-Link (for future use)

5, 6

~ , ⏊

Operating voltage AC 24 V

Functional ground (must be connected on the installation side with the building

Siemens Schweiz AG

A6V11646020_en--_b

Smart Infrastructure

2020-07-10

grounding system (PE).

10, 11

D, ⏊

Digital input (for future use)

Term

On, off

Switch for bus termination

Polar

On, off

Switch for polarization

65, 66, 67

COM1

Interface EIA-485 (Modbus MS/TP)

68, 69, 70

COM2

71, 72

MBUS

M-bus interface (for future use)

Warranty

Technical data on specific applications are valid only together with Siemens products listed

under "Equipment combinations". Siemens rejects any and all warranties in the event that

third-party products are used.

Inhaltsverzeichnis

Andere Siemens Controller Handbücher

Siemens

Siemens SIRIUS ACT 3SU18 Bedienungsanleitung

Siemens

Siemens KNX RL 524D23 Bedienungsanleitung

Siemens

Siemens GCA 1 Series Bedienungsanleitung

Siemens

Siemens LMV37.4 Series Bedienerhandbuch

Siemens

Siemens SIRIUS 3RM10 Series Bedienungsanleitung

Siemens

Siemens instabus JB 527C23 Bedienungsanleitung

Siemens

Siemens SPC3 Leitfaden

Siemens

Siemens SINUMERIK MCU1720 Technisches Dokument

Siemens

Siemens SKB32 Series Bedienungsanleitung

Siemens

Siemens Flowrite 599 Series Bedienungsanleitung

Siemens

Siemens SINAMICS G130 Bedienungsanleitung

Siemens

Siemens SIRIUS 3RW51 Technisches Dokument

Siemens

Siemens M50 Bedienungsanleitung

Siemens

Siemens Simatic S7-300 Bedienungsanleitung

Siemens

Siemens OpenAir GIB132.1P Betriebsanleitung

Siemens

Siemens 7SR224 Bedienungsanleitung

Siemens

Siemens SIMATIC Ident Stücklistenhandbuch

Siemens

Siemens SINAMICS S120 Technisches Dokument

Siemens

Siemens GPC 1A Series Bedienungsanleitung

Siemens

Siemens SIMATIC Extension Unit PROFINET Bedienungsanleitung

Siemens

Siemens Acvatix SAX Series Bedienerhandbuch

Siemens

Siemens AEROGYR RWI65.01 Bedienungsanleitung

Siemens

Siemens RVL469 Bedienungsanleitung

Siemens

Siemens SQM5 Series Betriebsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch

Regin

Regin CORRIGO L10 Bedienungsanleitung