Siemens SQM50.261R1Z3 Betriebsanleitung

SQM5…

Technical Instructions

Document No. 155-517P25

Mar 3, 2021

Reversing Actuators

Siemens Building Tec nologies, Inc.

Description SQM5... reversing actuators are used for t e positioning of flow control valves, butterfly

valves, dampers, or any application requiring rotary motion. T e SQM5… actuators

accommodate control input signals of 4 to 20 mA, 0 to 135 , 0 to 10 Vdc, 0 to 20 mA,

position proportional and floating control. T e available output signals include

4 to 20 mA, 0 to 135 , 0 to 10 Vdc, 0 to 20 mA, and 0 to 1000 . SQM5… actuators

are available wit up to six internal, easily adjustable switc es.

A selection of exc angeable circuit boards provide a variety of functions including

auto/manual selector switc , manual forward/reverse toggle switc , zero and span

adjustment, parallel or master/slave operation, split range control, input signal override,

and selectable electronic linearization.

T e SQM5… is engineered for precision. It is particularly well suited for applications

requiring a ig degree of modulating accuracy and repeatability.

T e SQM5… actuator may be mounted in any position. A selection of mounting

brackets and s afts provides installation flexibility and allows for t e simple replacement

of most competitive actuators.

Features  Two limit switc es, plus up to four internal auxiliary switc es

 Fully closed “economy position” switc

 Drive s aft and cam drum disengagement clutc es

 Auto/manual switc , manual control forward/reverse toggle switc

 UL, CSA approved 24 and 110 Vac versions

 CE approved 220 Vac versions

 Field reversible clockwise (cw) or counterclockwise (ccw) operation

 Various torque ratings and running times available

 Selection of field exc angeable single-ended and dual-ended s afts

 Mounting brackets to replace competitive actuators

Tec nical Instructions SQM5… Reversing Actuators

Document No. 155-517P25

Mar 3, 2021

Page 2 Siemens Building Tec nologies, Inc.

Features, Continue  Connections for bot base and face mounting

 Low ysteresis actuator and potentiometer gearing

 Externally visible position indication

 Selection of input and output signals

 Zero and span adjustment

 Field exc angeable circuit boards and potentiometers

 Electronic damper linearization function

 Split range and selectable parallel or master/slave operation

 Adjustable input signal override function

Application SQM5… actuators are uniquely suited for bot industrial and commercial

applications. T e ig level of accuracy permits precise modulating control of

industrial process and process eating applications, often significantly en ancing

performance and product quality.

In commercial and industrial burner applications requiring ig turndown and

reliable ignition, t e auxiliary switc es can be applied to create separate positions

for burner ignition and low fire. In dual fuel applications, additional switc es can be

used to create separate ig fire, low fire and ignition positions for eac fuel. T e

economy position switc is used to drive t e actuator to t e full closed position

w en t e burner is off.

In all applications, commissioning is simplified. S aft and cam drum disengagement

clutc es allow for t e quick manual alignment of t e actuator s aft and switc

cams. T e forward/reverse toggle switc in combination wit t e auto/manual

selector switc provides direct manual control.

SQM5… Reversing Actuators Tec nical Instructions

Document No. 155-517P25

Mar 3, 2021

Siemens Building Tec nologies, Inc. Page 3

Table Of Contents

Application Page 2

Pro uct Numbers

Table 1. Product numbers for pre-assembled UL/CSA/CE-approved

actuators Page 4

Table 2. Product numbers for accessories Page 5

SQM5… Product Number Identification Legend Page 6

Installation an Operating Instructions

S aft Installation Page 7

Rotational Direction Verification Page 8

Actuator Mounting Page 8

Switc Adjustment Page 8

S aft Adjustment Page 9

Cam Drum Adjustment Page 9

Wiring

Electrical Connection Page 9

Grounding Page 9

Wiring Connections

AGA56.1… circuit boards Page 10

AGA56.41/42/43… circuit boards Page 11

AGA56.9… circuit boards Page 13

Commissioning

Modulation Adjustment Page 15

Zero Adjustment Page 15

Span Adjustment Page 15

Cover Installation Page 16

Features

SQM5x.xxxxxZx actuators Page 16

SQM5x.xxxxxGx actuators Page 18

SQM5x.xxxxxHx actuators Page 18

SQM5x.xxxxxKx actuators Page 18

SQM5x.xxxxxAx actuators Page 18

Service Gui e

Reversing Rotational Direction Page 18

S aft Installation Page 20

Circuit Board Installation Page 20

AGA56.41/42/43… Page 20

AGA56.9A Page 22

AGA56.1A97 Page 24

Potentiometer Removal/Installation Page 25

Specification Data Page 26

Dimensions

Page 29

Tec nical Instructions SQM5… Reversing Actuators

Document No. 155-517P25

Mar 3, 2021

Page 4 Siemens Building Tec nologies, Inc.

Pro uct Numbers

Table 1. Pro uct Numbers for Pre-assemble Actuators.

Line

Voltage

4-20 mA

0-135 W

0-10

V c

110 V 220 V 24 V

90 8 ccw x x SQM50.261R1G3

90 8 cw x x SQM50.261R1G3R

90 8 ccw x x x x SQM50.261R1Z3

90 8 ccw x SQM50.264R1A SQM50.264R2A

90 8 cw x SQM50.264R1A0R

90 8 ccw x SQM50.264R1A3

90 8 cw x x SQM50.264R1G3R

90 8 ccw x x SQM50.264R1G4 SQM50.264R2G4

90 8 ccw x x x x SQM50.264R1Z3

140 12 ccw x x SQM50.361R1G3

140 12 cw x x SQM50.361R1G3R

140 12 ccw x x SQM50.361R1G7

140 12 ccw x x x x SQM50.361R1Z3

140 12 ccw x x SQM50.364R1G3

140 12 cw x x SQM50.364R1G3R

140 12 cw x x SQM50.364R1G4R

140 12 ccw x x x x SQM50.364R1Z3

140 25 ccw x SQM50.461R1A

140 25 ccw x SQM50.461R1A3

140 25 ccw x x SQM50.461R1G3

140 25 cw x x SQM50.461R1G3R

140 25 ccw x x SQM50.461R1H3

140 25 ccw x x x x SQM50.461R1Z3

140 25 ccw x x x x SQM50.461R1Z7

140 25 ccw x SQM50.464R1A SQM50.464R8A

140 25 cw x SQM50.464R1A0R

140 25 ccw x SQM50.464R1A3

140 25 cw x SQM50.464R1A3R

140 25 ccw x x SQM50.464R1G3 SQM50.464R2G3 SQM50.464R8G3

140 25 ccw x x SQM50.464R1G4

140 25 cw x x SQM50.464R1G3R SQM50.464R2G3R

140 25 ccw x x SQM50.464R1G7

140 25 cw x x SQM50.464R1G7R

140 25 ccw x x SQM50.464R1H3 SQM50.464R8H3

140 25 cw x x SQM50.464R1H3R

140 25 ccw x x x x SQM50.464R1Z3 SQM50.464R2Z3 SQM50.464R8Z3

140 25 cw x x x x SQM50.464R1Z3R

140 25 cw x x x x SQM50.467R1Z3R

200 25 ccw x x x x SQM53.461R1Z3

200 25 ccw x SQM53.464R1A

200 25 ccw x SQM53.464R1A3

200 25 ccw x x SQM53.464R1G3

200 25 ccw x x SQM53.464R1G7

200 25 cw x x SQM53.464R1G7R

200 25 ccw x x x x SQM53.464R1Z3 SQM53.464R2Z3

200 25 ccw x x x x SQM53.467R1Z3

200 25 cw x x x x SQM53.467R1Z3R

200 25 ccw x SQM53.467R2A3

310 37 ccw x SQM56.564R1A

310 37 ccw x x SQM56.564R1G4

310 37 ccw x x SQM56.564R1G7

310 37 ccw x x SQM56.564R1H4

310 37 ccw x x x x SQM56.564R1Z3

Pro uct Number

Torque

[lb-in]

Running

Time

90°@ 60

Hzsec

Rotation

Direction

Input Control Signals

SQM5… Reversing Actuators Tec nical Instructions

Document No. 155-517P25

Mar 3, 2021

Siemens Building Tec nologies, Inc. Page 5

Pro uct Numbers

Table 1. Pro uct Numbers for Pre

assemble Actuators

, Continue

Line

Voltage

4-20 mA

0-135 W

0-10

V c

110 V 220 V 24 V

400 50 ccw x x SQM56.664R1G3

400 50 cw x x SQM56.664R1G3R SQM56.664R2G3R

400 50 ccw x x SQM56.664R1H3

400 50 cw x x SQM56.664R1H3R

400 50 ccw x x x x SQM56.664R1Z3

400 50 cw x x x x SQM56.664R1Z3R

400 50 cw x SQM56.667R1A3R

400 50 ccw x x SQM56.667R1G3

400 50 cw x x SQM56.667R1G7R

400 50 ccw x x x x SQM56.667R1Z3

Torque1

[lb-in]

Running

Time 2

90°@ 60

Hzsec

Rotation

Direction

Input Control Signals3Pro uct Number

1. Torque will vary wit t e selection of t e s aft. See Specifications.

2. Running time for 135°  multiply by 1.5. For 50 Hz  multiply by 1.2

3. SQM5x.xxxxxZx models also accept a 0 to 20 mA input signal.

Table 1 above lists t e most common configurations of SQM5… series actuators. Many ot er configurations are

possible. See Product Number Identification Legend on t e following page or contact SCC Inc. to inquire about

configurations not listed in Table 1.

Table 2. Pro uct Numbers for Accessories.

Electronic Circuit Boar s

AGA56.1A97 24-250 Vac (A) board for SQM5x.xxxxxAx

AGA56.9A87 24 Vac (Z) board for SQM5x.xxxxxZx

AGA56.9A17 110 Vac (Z) board for SQM5x.xxxxxZx

AGA56.9A27 220 Vac (Z) board for SQM5x.xxxxxZx

AGA56.41A87 24 Vac (G) board for SQM5x.xxxxxGx

AGA56.41A17 110 Vac (G) board for SQM5x.xxxxxGx

AGA56.41A27 220 Vac (G) board for SQM5x.xxxxxGx

AGA56.42A87 24 Vac (H) board for SQM5x.xxxxxHx

AGA56.42A17 110 Vac (H) board for SQM5x.xxxxxHx

AGA56.42A27 220 Vac (H) board for SQM5x.xxxxxHx

AGA56.43A87 24 Vac (K) board for SQM5x.xxxxxKx

AGA56.43A17 110 Vac (K) board for SQM5x.xxxxxKx

AGA56.43A27 220 Vac (K) board for SQM5x.xxxxxKx

See Figure 1. Product Number Identification Legend.

Mounting Brackets & A apters

AGA57.3 for replacement of Honeywell MOD III, IV

actuators

AGA57.4 for replacement of Honeywell M640/740/940 and

Barber Colman EA20/40/50/60 actuators. Directly

adaptable to Eclipse butterfly valves.

ASK33.9 mounting kit for direct attac ment to Siemens

VKF41... butterfly valve. (S aft AGA58.1 required)

Shafts

AGA58.1 10 mm round wit key. Gear end only.

AGA58.2 12 mm round wit key. Gear end only.

AGA58.3 9 mm square. Dual-ended.

AGA58.4 3/8 inc square. Dual-ended.

AGA58.5 10mm D-s aped. Gear end only.

AGA58.7 14 mm round wit key. Gear end only.

For exact s aft sizes, see Dimensions.

Shaft Seals

AGA55.5 NEMA s aft seal kit. (S aft AGA58.4 required)

Potentiometers

ASZ12.803 and ASZ12.30 1000, 90°

ASZ12.833 and ASZ12.33 1000, 135°

ASZ22.803 and ASZ22.30 1000/1000 double

potentiometer, 90°

ASZ22.833 and ASZ22.33 1000/1000 double

potentiometer, 135°

ASZ16.703 135, 90° (wire wound)

ASZ16.733 135, 135° (wire wound)

ASZ66.733 135/135, double potentiometer 135° (wire

wound)

Additional potentiometer models available. See Siemens

technical data sheet 7921

Tec nical Instructions SQM5… Reversing Actuators

Document No. 155-517P25

Mar 3, 2021

Page 6 Siemens Building Tec nologies, Inc.

Pro uct Number I entification Legen

For actuator identification only. To select product numbers for ordering, see Table 1.

Figure 1. SQM5… Pro uct Number I entification Legen .

Actuator family

Torque in-lb @ 60 (50) Hz.

090 for 8 (10) sec. running time

0140 for 12 (15), 25 (30), 37 (45) sec.

3200 for 25 (30) sec.

6310 for 37 (45) sec.

6400 for 50 (60), 75 (90) sec.

Running time for 90°

Not all actuator running times are

available in eac torque.

Refer to table 1

60 Hz. 50 Hz.

28 sec. 210 sec.

312 sec. 315 sec.

425 sec. 430 sec.

537 sec. 545 sec.

650 sec. 660 sec.

Number of SPDT switches

62 limit and 4 auxiliary switc es

Shaft selection

no s aft

(shaft must be or ere separately)

1round 10 mm, single ended

4square 3/8 inc , dual ended

5D-s aped 10mm, single ended

7round 14 mm, single ended

Approvals

RUL recognized, CSA certified

Operating voltage (Vac @ 50-60 Hz)

1110-120 Vac

2220-240 Vac

824 Vac

Internal circuit boar

(SQM5x.xxxxx

G, H, K, Z

x actuators require potentiometer ASZ…)

AAGA56.1A97 (position proportional control)

GAGA56.41A... (4 to 20 mA input)

HAGA56.42A... (0 to 135 O m input)

KAGA56.43A... (0 to 10 Vdc input)

ZAGA56.9... (all inputs/outputs, linearization, split ranging, override, and pre-set positioning)

Potentiometer

(1000 O m required w en using SQM5x.xxxxx

G, H, K, Z

x actuators)

3ASZ12.30 (1000 O m, 90°)

4ASZ12.33 (1000 O m, 135°)

7ASZ22.30 (1000/1000 O m, 90°)

8ASZ22.33 (1000/1000 O m, 135°)

BASZ16.703 (135 O m, 90°)

CASZ16.733 (135 O m, 135°)

LASZ66.733 (135/135 O m, 135°)

Rotational irection (Product numbers ending wit out R are ccw)

Clockwise (w en facing gear end. See

Figure 6

Shaft seal (Only available wit AGA58.4 3/8 inc square s aft)

Blank No s aft seal kit provided

-N4 S aft seal kit AGA55.5 installed on actuator

640SQM5 -N4R3Z1R4

SQM5… Reversing Actuators Tec nical Instructions

Document No. 155-517P25

Mar 3, 2021

Siemens Building Tec nologies, Inc. Page 7

Installation an

Operation

Instructions

SQM5… actuators are sometimes s ipped wit out t e s aft installed. To install t e

selected s aft:

1. Loosen t e two screws on t e actuator cover corners. See Figure 2.

2. Lift t e screws and raise t e cover. See Figure 3.

Shaft Installation

Figure 2.

Figure 3.

3. Eac s aft is supplied wit two was ers and a “C” clip. See Figure 4. Using

spreading pliers, remove t e “C” clip and t e was ers from t e s aft.

Figure 4.

4. Insert t e “insert end” of t e s aft into t e “gear end” of t e actuator.

5. Pus t e s aft until t e “insert end” reac es just s ort of t e brass bus ing at t e

ot er end of t e actuator.

6. Put one of t e was ers on t e insert end of t e s aft. See Figure 5.

Figure 5.

7. Line up t e “s aft key” wit t e key slot on t e “gear end” of t e actuator and slide

t e s aft until t e “insert end” is completely t roug t e brass bus ing.

8. Place t e second was er onto t e “insert end” of t e s aft. Using spreading pliers,

install t e “C” clip.

Tec nical Instructions SQM5… Reversing Actuators

Document No. 155-517P25

Mar 3, 2021

Page 8 Siemens Building Tec nologies, Inc.

Rotational Direction

Verification

Actuator model numbers t at end wit “R” are factory configured for clockwise (cw),

minimum to maximum rotation w en facing t e gear end of t e actuator, or

counterclockwise (ccw) rotation w en facing t e ot er end of t e actuator. T e gear end

of t e actuator is t e side opposite of t e visual position indicator.

To field reverse t e direction of rotation, see Service Guide, “Reversing Rotational

Direction”.

Actuator Mounting SQM5… actuators can be mounted in any orientation using t e four oles located on

t e bottom corners of t e actuator base. Optional base mounting brackets are available.

See Table 2.

SQM5… actuators can also be face mounted using self tapping screws in combination

wit t e various oles on t e face of t e actuator gear end.

Figure 6. Component I entification on the Cam Drum Si e of the SQM5… Actuator.

Switch A justment

See Figure 6.

All SQM5…actuators are factory wired wit Switc I (maximum), Switc II (fully closed

“economy position”) and Switc III (minimum). T e individual switc cams I, II, and III

are factory set to 90, 0 and 10 respectively.

NOTE: T e single switc cam pointers are used toget er wit t e black scales w en

configured for counterclockwise (ccw) operation.

T e double switc cam pointers are used toget er wit t e red scales w en

configured for clockwise (cw) operation.

T e individual switc cams can be adjusted by and or wit t e use of t e tool

attac ed to t e outside of t e inged switc terminal protection lid.

SQM5… Reversing Actuators Tec nical Instructions

Document No. 155-517P25

Mar 3, 2021

Siemens Building Tec nologies, Inc. Page 9

Switch A justment,

Continue NOTE: If a potentiometer is installed, t e adjustable range of t e switc es depends

on t e range of t e potentiometer.

SQM5x.xxxxxAx actuators may be adjusted between 0 and 160.

SQM5x.xxxxxx3 actuators ave a 90 potentiometer and t e switc es must be

adjusted only between 0 and 90.

SQM5x.xxxxxx4 actuators ave a 135 potentiometer and t e switc es must

be adjusted only between 0 and 135.

Shaft A justment

See Figure 6.

T e actuator s aft can be disengaged by pressing t e silver s aft release button. T e

button is located above t e grounding screw, under t e inged terminal protection

cover, and to t e rig t of t e auto/manual switc . After pressing t e s aft release button

in and slig tly upward, t e s aft can be manually rotated. After t e s aft as been

manually aligned to t e closed position, re-engage t e s aft by pus ing t e s aft

release button downwards.

Cam Drum A justment

See Figure 6.

Position Indicating Dial

Adjustment

Once t e s aft as been set, t e cam drum must be manually aligned by pressing and

olding t e black cam drum release button (see Figure 6). Rotate t e cam drum until

t e “0” mark on t e actuator position scale (left scale on t e cam drum) is aligned wit

t e gray actuator position indicating pointer.

T e actual position of t e SQM5… actuator is indicated by t e gray actuator position

indicating pointer (see Figure 6). T e position is also displayed by t e indicating dial

t roug t e ousing’s window. Ensure t at t e actuator position indicating dial is

aligned wit t e actuator position scale. If necessary, rotate t e dial in t e clockwise

direction.

CAUTION:

Turning t e dial in t e counterclockwise direction may loosen t e

potentiometer locking screw.

Wiring

Electrical Connection

SQM5… actuators are equipped wit two removable conduit connection plates located

on t e upper corner of t e gear ousing. Eac plate is provided wit two t readed

connections for 1/2" NPSM conduit connectors. T e use of flexible stranded wire is

recommended.

Groun ing

CAUTION:

To avoid electro-magnetic interference, t e SQM5… actuators must be

grounded.

T e ground terminal is located to t e rig t of t e auto/manual switc .

Disconnect t e circuit board wire marked 51 during ig voltage testing.

Reconnect it to t e grounding terminal after t e test.

Tec nical Instructions SQM5… Reversing Actuators

Document No. 155-517P25

Mar 3, 2021

Page 10 Siemens Building Tec nologies, Inc.

Wiring Connections NOTE: SQM5… actuators require a single source, single p ase power supply.

Wiring connections vary depending on w ic AGA56…. circuit board is installed.

AGA56.1… circuit boards.

See Figures 7 and 8.

Manual Operation

1. Set t e AUTO/MAN switc in t e MAN position.

2. Connect ground to t e screw located below t e s aft release button.

3. Connect neutral to t e double terminal block, located on t e left side of t e gray

switc ousing.

4. Only terminal "L" must be to enable manual operation. T e actuator can now be

driven to t e maximum position (switc cam I) or t e fully closed "economy

position" (switc cam II) by using t e toggle switc located to t e left of t e

AUTO/MAN switc .

Automatic Operation

1. Set t e AUTO/MAN switc in t e AUTO position.

2. Connect ground to t e screw located below t e s aft release button.

3. Connect neutral to t e double terminal block located on t e left side of t e gray

switc ousing.

4. Connect line voltage to terminal A to drive t e actuator in t e opening direction.

5. Connect line voltage to terminal Z to drive t e actuator in t e closing direction.

CAUTION:

Do not power terminals A and Z simultaneously. Actuator damage will occur.

Figure 7. Basic Functional Diagram of AGA56.1…

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Siemens Controller Handbücher

Siemens

Siemens KNX RL 524D23 Bedienungsanleitung

Siemens

Siemens SIMATIC S5 Series Bedienungsanleitung

Siemens

Siemens SIDOOR ATE500E Bedienungsanleitung

Siemens

Siemens SSA911.01TH Bedienungsanleitung

Siemens

Siemens SIKOSTART 3RW34 Bedienungsanleitung

Siemens

Siemens Simatic S7-400 Bedienungsanleitung

Siemens

Siemens SINAMICS SL150 6SL38655UM427AA02 Bedienungsanleitung

Siemens

Siemens SIPART DR19 Bedienungsanleitung

Siemens

Siemens SIMATIC S5-100U Benutzerhandbuch

Siemens

Siemens SIMATIC S7-200 Versionshinweis

Siemens

Siemens SIDOOR AT40 Benutzerhandbuch

Siemens

Siemens REV23.03RF Bedienungsanleitung

Siemens

Siemens RMH760 Bedienungsanleitung

Siemens

Siemens SIRIUS 3SX3217 Bedienungsanleitung

Siemens

Siemens 81000 series Bedienungsanleitung

Siemens

Siemens SIMATIC S7-1200 CP 1243-8 IRC Bedienungsanleitung

Siemens

Siemens SIMOTION C230-2 Bedienungsanleitung

Siemens

Siemens HydroRanger 200 Bedienungsanleitung

Siemens

Siemens QPA84 Bedienungsanleitung

Siemens

Siemens Simatic S7-1500 Stücklistenhandbuch

Siemens

Siemens RWB27 Timeswitch Bedienungsanleitung

Siemens

Siemens Simatic S7-300 Bedienungsanleitung

Siemens

Siemens ECOFAST 3RK1323 Series Bedienungsanleitung

Siemens

Siemens Simatic S7-200 CPU 210 Benutzerhandbuch

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch

Regin

Regin CORRIGO L10 Bedienungsanleitung