Siemens North American Electric 3RW30-40 Series Bedienungsanleitung

Inhaltsverzeichnis

Andere Siemens Controller Handbücher

Siemens

Siemens GDB 1 Series Bedienungsanleitung

Siemens

Siemens Climatix S300 HRV Benutzerhandbuch

Siemens

Siemens GDB 9E Series Bedienungsanleitung

Siemens

Siemens SIMATIC S7-1200 Bedienungsanleitung

Siemens

Siemens RMZ791 Bedienungsanleitung

Siemens

Siemens SIMATIC S7 Benutzerhandbuch

Siemens

Siemens RVL481 Bedienungsanleitung

Siemens

Siemens SIMATIC EMS400S PSB-S Bedienungsanleitung

Siemens

Siemens SIMOTION C230-2 Bedienungsanleitung

Siemens

Siemens SIRIUS 3RM1 Bedienungsanleitung

Siemens

Siemens SIMATRIX Betriebsanleitung

Siemens

Siemens Acvatix G B111.9E/MO Series Bedienungsanleitung

Siemens

Siemens SPC3 Leitfaden

Siemens

Siemens RLM162 Bedienungsanleitung

Siemens

Siemens Simatic S7-300 Bedienungsanleitung

Siemens

Siemens Simatic S7-1500R Benutzerhandbuch

Siemens

Siemens RDF20U Betriebsanleitung

Siemens

Siemens SIRIUS M200D Bedienungsanleitung

Siemens

Siemens OpenAir GSD 1 Series Bedienungsanleitung

Siemens

Siemens TUTORbit POL687 Service-Handbuch

Siemens

Siemens Powermite 599 MT Series Betriebsanleitung

Siemens

Siemens SINUMERIK 802C Bedienungsanleitung

Siemens

Siemens RAJA+ 3TE7 DOL Leitfaden

Siemens

Siemens SQL321B Series Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch

Regin

Regin CORRIGO L10 Bedienungsanleitung

Siemens 3RW30-40 Soft Starter –Quick Start Guide

© 2020 North American Electric, Inc.

naemotors.com

800.888.0404

1

MAN-CUST-0004

REV 1.2

Quick Start Guide

Siemens

3RW30-40 Series

Soft Starter

1.0 Quick Start

Contact Your Distributor If No Electrical Schematics Were Provided with Panel

1. Verify NAE Serial on Electrical Schematics matches the serial number posted inside of enclosure

2. Connect Motor Leads to U,V,W terminals on Soft Start, Torque to specification on schematic

3. Connect incoming power to line side of disconnect, torque to specifications on Electrical Schematics.

*Ensure Proper grounding per NEC and Local Code*

4. Configure any phase or voltage protection devices to the appropriate settings for your incoming power.

For MotorSaver, these instructions are posted inside of enclosure.

5. Power the panel on by moving the disconnect into the “ON”position

6. Once Powered, verify any phase or voltage protection devices are not faulted.

i.e. MotorSaver-460 status light is green. If not, refer to instructions posted in enclosure

7. Configure Soft Start parameters for Application, using the potentiometers outlined on the back of this

document.

8. Toenable AUTO mode Operation, wire NO contact across terminals indicated on Electrical Schematic

9. The panel is now ready for operation

Siemens 3RW30-40 Soft Starter –Quick Start Guide

© 2020 North American Electric, Inc.

naemotors.com

800.888.0404

2

MAN-CUST-0004

REV 1.2

2.0 Configuration

Soft Start must be appropriately configured to application demands with the Parameterization Potentiometers

before operation or operation-inhibiting faults will occur.

NAE is not responsible for damage caused by incorrect parameterization

3RW30 & 3RW40 Parameterization Potentiometers (3-5 only available on 3RW40 Series)

2.1

Remote Run: Default Control Method

1. U potentiometer

The starting voltage value is set with the U potentiometer. This Value determines

the starting torque of the motor. A lower starting voltage results in a lower starting

torque (soft start) and a lower starting current.

2. t potentiometer

Youdefine the length of the required ramp time with the t potentiometer. The ramp

time determines the time taken to increase the motor voltage from the parameterized

starting voltage to the mains voltage. This time merely influences the motor’s

acceleration torque, which drives the load during the ramp-up process. The actual

motor starting times are load-dependent andcan differfrom the 3RW soft starter setting.

3. t potentiometer

Youcan set a ramp-down time with the t potentiometer. This determines how long

power should still be supplied to the motor after the ON command is removed.

The torque generated in the motor is reduced by means of a voltage ramp function

within this ram-down time and the application stops smoothly.

4. le potentiometer

The rated operational current of the motor must be set with the le potentiometer

5. xle potentiometer

The current limiting value is set with the xle potentiometer to the maximum required

starting current as a factor of the set rated motor current (le)