Siemens OpenAir GEB Series Bedienungsanleitung

A6V101037253_en--_a Siemens

2017-02-17 Building Technologies

OpenAir

™

Air Damper Actuators Modbus RTU

GEB.., GIB.. Non-spring return types

Damper actuators 15 Nm / 35 Nm (non-spring return) with Modbus communication

●GEB.. 15 Nm nominal torque

●GIB.. 35 Nm nominal torque

●Modbus RTU communication

●Operating voltage AC 24 V

●For air-handling units (AHU) and other ventilation applications

2 / 14

Siemens A6V101037253_en--_a

Building Technologies 2017-02-17

Functions

Function Description

Communication Modbus RTU (RS-485), not galvanically separated

Functions - Setpoint and actual position 0..100%

- Override control Open / Close / Min / Max / Stop

- Setpoint monitoring and backup mode

Supported baudrates 9.6, 19.2, 38.4, 57.6, 78.4, 115.2 kbaud

Supported transmission

formats 1-8-E-1, 1-8-N-1-, 1-8-O-1, 1-8-N-2

Termination 120 Ωelectronically switchable

Type summary

Product no. Stock no. Operating

voltage Positioning

signal Power consumption Posit. time Manual

adjuster Position

feedback

GEB161.1E/MO S55499-D298 AC 24 V Modbus RTU 6 VA / 5.5 W max.1)

150 s Yes Yes

GIB161.1E/MO S55499-D299 8 VA / 8 W max. 1)

1) max. = actuator rotates

Accessories / Spare parts

GEB.. Please refer to data sheet N4697

GIB.. Please refer to data sheet N4699

Ordering (Example)

Product no. Stock no. Description Amount

GEB161.1E/MO S55499-D298 Damper actuator Modbus 1

+ accessories (shaft inserts, etc.)

Equipment combinations

Product no. Stock no. Doc. type Doc. number

POL424.50/STD

POL424.70/STD

S55394-C245-A100

S55394-C247-A100

Datasheet Q3973

Operating manual P3973

POL635.00/STD BPZ:POL635.00/STD Datasheet Q3230

Operating manual P3903

POL638.00/STD

POL638.70/STD

BPZ: POL638.00/STD

S55396-C387-A100

Datasheet Q3900

Operating manual P3903

3 / 14

A6V101037253_en--_a Siemens

2017-02-17 Building Technologies

Product documentation

Title Topic Document ID

Rotary damper actuators without

spring return GEB..

Detailed information about rotary actuators (15 Nm) Z4621

Rotary damper actuators without

spring return GIB..

Detailed information about rotary actuators (35 Nm) Z4626

Climatix AHU Application Application description A3975

Installation Instruction Installation of types with external Modbus interface A6V101006034

Related documents such as environmental declarations, CE declarations, etc., can be down-

loaded at the following Internet address: http://siemens.com/bt/download

Notes

Safety

Caution

National safety regulations

Failure to comply with national safety regulations may result in personal injury and

property damage.

●Observe national provisions and comply with the appropriate safety regulations.

Mounting

Note: Do not open the damper actuators

Mounting positions

IP54 protection in following mounting positions

IP54

4 / 14

Siemens A6V101037253_en--_a

Building Technologies 2017-02-17

Commissioning

Workflow 1

The devices are especially designed for using the Climatix push-button configuration as de-

scribed in document A3975 1). The bus configuration can alternatively be parameterized by

the local HMI, cf. page 5.

During commissioning check/set the following:

∂Bus configuration (address, baudrate, transmission mode, and optionally termina-

tion). The default address 255 allows to mount and power multiple actuators at the

same time without interfering with each other.

∂Damper actuator parameters (opening direction, position limits, position adaptation

etc.) can be checked via the Modbus register.

1) The documents can be downloaded from http://siemens.com/bt/download

Workflow 2

The devices can be configured over bus if the pre-commissioning settings allow for a con-

nection between the Modbus master / programming tool and peripheral devices (i.e. non-

conflicting addresses and matching baudrate / transmission format).

∂Full configuration over bus: If the address is unique per segment when powered up,

the device can be accessed by the Modbus master (or programming tool) and the

address and other parameters can then be set to the definitive values.

∂Partial configuration over bus: If the address is not unique per segment when pow-

ered up, each device must get a non-conflicting address before connecting it to the

bus, either by using the address input with push button (cf. page 6) or by setting the

address to 246 with push button press > 5s und < 10s (cf. page 5). After addressing

all devices, the remaining configuration can be done over the bus using the default

settings for baudrate (auto-baud) and transmission mode for the Modbus master.

∂Overwriting the bus configuration over bus uses a timeout. If „1 = Load“ is not written

into Reg 768 within 30 seconds, all values are discarded.

Example: Table shows bus configuration registers before and after changing them over bus.

Reg. Name Pre-commissioning New value (ex.)

764 Modbus Address 246 12

765 Baudrate 0 = auto 1 = 9600

766 Transmission Format 0 = 1-8-E-1 3 = 1-8-N-2

767 Termination 0 = Off 0 = Off

768 Bus Conf. Command 0 = Ready 1 = Load

Maintenance

The damper actuators are maintenance-free.

Disconnect the electrical connections from the terminals if you want to work at the device.

Disposal

The device is considered an electronics device for disposal in terms of Euro-

pean Directive 2012/19/EU and may not be disposed of as domestic garbage.

∂Dispose of the device through channels provided for this purpose.

∂Comply with all local and currently applicable laws and regulations.

Warranty

Technical data on specific applications are valid only together with Siemens products listed

under "Equipment combinations". Siemens rejects any and all warranties in the event that

third-party products are used.

5 / 14

A6V101037253_en--_a Siemens

2017-02-17 Building Technologies

HMI (Human-Machine Interface)

Push-button operation

Activity Push-button operation Confirmation

Display current address

(starting with lowest address digit)

Press button < 1s 1-digits: red

10-digits: green

100-digits: orange

If termination is switched on, LED

flashes 1x blue after address display

Example:

124 = 4x red, 2x green, 1x orange

Turn bus termination on / off

turn on 1. press 3x LED flashing and flickering stops

(termination mode)

2. press 1x shortly LED flashes 1x blue

3. press button until LED shines red LED shines red (confirmation)

4. release button LED off

Address display

LED flashes 1x blue after address

display

Normal operation

turn off 1. press 3x LED flashing and flickering stops

(termination mode)

2. press button until LED shines red LED shines red (confirmation)

3. release button Normal operation

Enter Modbus address with push-

button

Press button > 1s and < 5s See chapter ‘Push-button addressing ’

below

Enter push-button addressing

mode

(for use with ClimatixTM

controllers)

1. Press button > 5s and < 10s

2. Release button

LED shines red and gets dark after 5s

LED shines orange

Reset to factory settings Press button > 10s LED flashes orange

LED colors and patterns

Color Pattern Description

Green 1s on / 5s off Normal operation (“life pulse”) without bus traffic

flashing Normal operation (“life pulse”) with bus traffic

Orange / green 1s orange / 1s green Device is in override control

Orange 1s on / 1s off Bus parameters not yet configured

1s on / 5s off Backup mode entered

Red Steady Mechanical fault, device jammed or manual override

1s on / 5s off Internal error

0.1s on / 1s off Invalid configuration, e.g. Min = Max

Blue Flashes 1x after address display Bus termination is set active.

6 / 14

Siemens A6V101037253_en--_a

Building Technologies 2017-02-17

Resetting the device by push button

1. Press button for >10s ⇓LED starts flashing orange

2. Release button while LED still flashes ⇓LED keeps flashing for 3s

3. If the button is pressed within these 3s, the reset is cancelled.

4. After those 3s ⇓LED shines red (reset), then the device restarts.

Push-button addressing

Display current address (starting with lowest address digit)

The Modbus address can be set without a separate tool by using the push-button and LED.

To display the current address, press button <1s.

Colors

1-digits: red 10-digits: green 100-digits: orange

Example for address 124:

LED

Note

The address is entered and shown starting with lowest

address digit, see figure above.

(124 in the example is starting with 4x red)

Set new address (starting with lowest address digit)

1. Enter addressing mode: press button > 1s until LED shines red, then release button

(before LED gets dark).

2. Enter digits: press button n-times ⇓LED flashes per button press (feedback).

Colors: 1-digits: red / 10-digits: green / 100-digits: orange

3. Store digits: press button until LED shines in color of following digits – release button,

4. Save address: press button until LED shines red (confirmation) ⇓release button.

An address can be stored at any time, i.e. after setting the 1-digits, or after setting the 1-

and the 10-digits.

5. Entered address is repeated one times for confirmation.

Note: If button is released before LED shines red, the address is discarded.

7 / 14

A6V101037253_en--_a Siemens

2017-02-17 Building Technologies

Examples

Set address “124”:

1. Enter addressing mode

2. Set 1-digits: Press button 4-times ⇓LED flashes red per button press

3. Store 1-digits: press button until LED shines green – release button

4. Set 10-digits: Press button 2-times ⇓LED flashes green per button press

5. Store 10-digits: press button until LED shines orange – release button

6. Set 100-digits: Press button 1-times ⇓LED flashes orange per button press

7. Store address: press button until LED shines red – release button

⇓address is stored and displayed 1x for confirmation

Set address “50”:

1. Enter addressing mode

2. Skip 1-digits: Hold button pressed until LED shines green – release button

3. Set 10-digits: Press button 5-times ⇓LED flashes green per button press

4. Store address (skip 100-digits): hold button pressed until LED shines red

– release button

⇓address is stored and displayed 1x for confirmation

Set address “5”:

1. Enter addressing mode

2. Set 1-digits: Press button 5-times ⇓LED flashes green per button press

3. Store address: press button until LED shines red

⇓address is stored and displayed 1x for confirmation

8 / 14

Siemens A6V101037253_en--_a

Building Technologies 2017-02-17

Modbus registers

Reg. Name R/W Unit Scaling Range / enumeration

Process Values

1Setpoint RW % 0.01 0..100

2Override control RW -- -- 0 = Off / 1 = Open / 2 = Close

3 = Stop / 4 = GoToMin / 5 = GoToMax

3Actual position R % 0.01 0..100

256 Command RW -- 0 = Ready / 1 = Adaption / 2 = Selftest

3 = ReInitDevice / 4 = RemoteFactory

Reset

Parameters

257 Opening direction RW -- -- 0 = CW / 1 = CCW

258 Adaptive Mode RW -- -- 0 = Off / 1 = On

259 Operating Mode RW -- -- 1 = POS

260 MinPosition RW % 0.01 0..100

261 MaxPosition RW % 0.01 0..100

262 Actuator Running Time R s 1 150

513 Backup Mode RW -- -- 0 = Go to BackupPosition

1 = Keep last position

2 = Disabled

514 Backup Position RW % 0.01 0..100

515 Backup Timeout RW s 1 0..65535

516 Startup Setpoint RW % 0.01 0..100

764 Modbus Address RW -- -- 1..247 / 255 = “unassigned”

765 Baudrate RW -- -- 0 = auto / 1 = 9600 / 2 = 19200

3 = 38400 / 4 = 57600 / 5 = 76800

6 = 115200

766 Transmission Format RW -- -- 0 = 1-8-E-1 / 1 = 1-8-O-1

2 = 1-8-N-1 / 3 = 1-8-N-2

767 Bus Termination RW -- -- 0 = Off / 1 = On

768 Bus Conf. Command RW -- -- 0 = Ready / 1 = Load / 2 = Discard

769 Status R -- -- See below, Register 769 “Status”

Device information

1281 Factory Index R -- --

Cf. product documentation Z4621 /

Z4626 1)

1282-83 Factory Date R -- --

1284-85 Factory SeqNo R -- --

1409-16 TypeASN [Char_16..1] R -- --

1) The documents can be downloaded from http://siemens.com/bt/download

Status

Bit 00 1 = reserved Bit 06 1 = Adaption done

Bit 01 1 = Backup mode active Bit 07 1 = Adaption in progress

Bit 02 1 = reserved Bit 08 1 = Adaption error

Bit 03 1 = reserved Bit 09 1 = Selftest failed

Bit 04 1 = Mechanical fault, device

jammed or manual override

Bit 10 1 = Selftest passed

Bit 05 1 = Nom. lifetime exceeded Bit 11 1 = Invalid configuration

9 / 14

A6V101037253_en--_a Siemens

2017-02-17 Building Technologies

Supported function codes

Function codes

03 (0x03) Read Holding Registers

04 (0x04) Read Input Registers

06 (0x06) Write Single Register

16 (0x10) Write Multiple registers (Limitation: Max. 120 registers within one message)

Technical data

Power supply

Operating voltage G..B161.1E/MO AC 24 V ± 20 % (SELV) or

AC 24 V class 2 (US)

Frequency 50/60 Hz

Power consumption at 50 Hz

Actuator holds GEB161.1E/MO

GIB161.1E/MO

1.5 W

1.1 W

Actuator rotates GEB161.1E/MO

GIB161.1E/MO

6 VA / 5.5 W

8 VA / 8 W

Function data

Running time for rotary

angle 90°(motor operation)

G..B161.1E/MO 150 s

Nominal torque GEB.. 15 Nm

GIB.. 35 Nm

Maximum torque GEB.. 30 Nm

GIB.. 75 Nm

Nominal / maximum

rotation angle

90° / 95° ± 2°

Direction of rotation Adjustable over bus Clockwise (CW) /

Counter-clockwise (CCW)

Communication

Communication protocol Modbus RTU RS-485, not galvanically separated

Number of nodes Max. 32

Address range 1...247 / 255

Default: 255

Transmission formats 1-8-E-1 / 1-8-O-1 / 1-8-N-1 / 1-8-N-2

Default: 1-8-E-1

Baudrates (kBaud) Auto / 9.6 / 19.2 / 38.4 / 57.6 / 76.8 / 115.2

Default: Auto

Termination 120 Ωelectronically switchable

Default: Off

Connection cables

Cable length 0.9 m

Power supply /

Communication

Number of cores and cross-sectional area 5 x 0.75 mm2

10 / 14

Siemens A6V101037253_en--_a

Building Technologies 2017-02-17

Degree of protection

Degree of protection Degree of protection acc. to EN 60529

(see also chapter ‘Mounting’ above)

IP54

Safety class Safety class acc. to EN 60730 III

Environmental conditions

Applicable standard IEC 60721-3-x

Operation Climatic conditions Class 3K5

Mounting location Indoors

Temperature general -32…55 °C

Humidity (non condensing) < 95 % r. h.

Transport Climatic conditions Class 2K2

Temperature -32…70 °C

Humidity < 95 % r. h.

Storage Climatic conditions Class 1K3

Temperature -5…45 °C

Humidity < 95 % r. h.

Directives and Standards

Product standard EN60730-x

Electromagnetic compatibility (Application) For residential, commercial and industrial

environments

GEB161.1E/MO GIB161.1E/MO

EU Conformity (CE) A5W000043761) A5W00004368 1)

RCM Conformity A5W00004377 1) A5W00004369 1)

EAC Conformity Eurasia conformity for all G..B variants

UL, cUL UL 873 http://ul.com/database

Environmental compatibility

The product environmental declarations CE1E4621en 1), CE1E4626en 1) and

A6V101083254en 1) contain data on environmentally compatible product design and

assessments (RoHS compliance, materials composition, packaging, environmental

benefit, disposal).

Dimensions / Weight

Weight (w/o packaging) GEB.. 1.2 kg

GIB.. 2.2 kg

Dimensions (w/o bus

interf ace)

GEB.. 81 x 192 x 63 mm

GIB.. 100 x 300 x 67.5 mm

Suitable drive shafts GEB.. (round / square shaft) 6.4…20.5 mm / 6.4...13 mm

GIB.. (round / square shaft) 8.0…25.6 mm / 6.0...18 mm

Min. drive shaft length 20 mm

1) The documents can be downloaded from http://siemens.com/bt/download

Andere Handbücher für OpenAir GEB Series

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Siemens Controller Handbücher

Siemens

Siemens K60 4I/1O Bedienungsanleitung

Siemens

Siemens Sirius 3RA6 Benutzerhandbuch

Siemens

Siemens OpenAir GEB141.1P Betriebsanleitung

Siemens

Siemens L-828 Bedienungsanleitung

Siemens

Siemens SKD62UA Bedienungsanleitung

Siemens

Siemens SQL36E series Bedienungsanleitung

Siemens

Siemens RMH760 Bedienungsanleitung

Siemens

Siemens SIDOOR ATE500E Bedienungsanleitung

Siemens

Siemens SQU83 Bedienungsanleitung

Siemens

Siemens ST950ELV Bedienungsanleitung

Siemens

Siemens SINUMERIK 840D Betriebsanleitung

Siemens

Siemens SITRANS VP300 Bedienungsanleitung

Siemens

Siemens simovert masterdrives Bedienungsanleitung

Siemens

Siemens 540-716 Bedienungsanleitung

Siemens

Siemens SINUMERIK 828D Turning Bedienungsanleitung

Siemens

Siemens GEB-1E Series Bedienungsanleitung

Siemens

Siemens DESIGO PX Series Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Siemens

Siemens SQS65.2 Bedienungsanleitung

Siemens

Siemens SIMATIC S5-100U Benutzerhandbuch

Siemens

Siemens SIRIUS 3RW44 Bedienungsanleitung

Siemens

Siemens SQL36E65 Bedienungsanleitung

Siemens

Siemens SINAMICS V90 PROFINET Benutzerhandbuch

Siemens

Siemens SIMATIC S7-1200 CP 1243-8 IRC Benutzerhandbuch

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch

Regin

Regin CORRIGO L10 Bedienungsanleitung