Siemens Simantic S7-1500 Bedienungsanleitung

___________________

___________

___________________

SIMATIC

S7-1500

CPU 1517T-3 PN/DP

(6ES7517-3TP00-0AB0)

Manual

12/2017

A5E36285525

-AB

Preface

Documentation guide

Product overview

Wiring

Interrupts, error messages,

diagnostics and system

alarms

Technical specifications

Dimension drawing

Siemens AG

Division Digital Factory

Postfach 48 48

90026 NÜRNBERG

GERMANY

A5E36285525-AB

Ⓟ

11/2017 Subject to change

Legal information

Warning notice system

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent

damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert

symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are

graded according to the degree of danger.

DANGER

indicates that death or severe personal injury will result if proper precautions are not taken.

WARNING

indicates that death or severe personal injury may result if proper precautions are not taken.

CAUTION

indicates that minor personal injury can result if proper precautions are not taken.

NOTICE

indicates that property damage can result if proper precautions are not taken.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will

be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to

property damage.

Qualified Personnel

The product/system described in this documentation may be operated only by

personnel qualified

for the specific

task in accordance with the relevant documentation, in particular its warning notices and safety instructions.

Qualified personnel are those who, based on their training and experience, are capable of identifying risks and

avoiding potential hazards when working with these products/systems.

Proper use of Siemens products

Note the following:

WARNING

Siemens products may only be used for the applications described in the catalog and in the relevant technical

documentation. If products and components from other manufacturers are used, these must be recommended

or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and

maintenance are required to ensure that the products operate safely and without any problems. The permissible

ambient conditions must be complied with. The information in the relevant documentation must be observed.

Trademarks

All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication

may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and software

described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the

information in this publication is reviewed regularly and any necessary corrections are included in subsequent

editions.

CPU 1517T-3 PN/DP (6ES7517-3TP00-0AB0)

4Manual, 12/2017, A5E36285525-AB

Preface

Purpose of the documentation

This manual supplements the system manual of the S7-1500 automation system/ ET 200MP

distributed I/O system as well as the function manuals. This manual contains a description of

the module-specific information. The system-related functions are described in the system

manual. All system-spanning functions are described in the function manuals.

The information provided in this manual and the system manual enables you to commission

the CPU 1517T-3 PN/DP.

Conventions

STEP 7: In this documentation, "STEP 7" is used as a synonym for all versions of the

configuration and programming software "STEP 7 (TIA Portal)".

Please also observe notes marked as follows:

Note

A note contains important information on the product described in the documentation, on the

handling of the product or on the section of the document

ation to which particular attention

should be paid.

Security information

Siemens provides products and solutions with industrial security functions that support the

secure operation of plants, systems, machines and networks.

In order to protect plants, systems, machines and networks against cyber threats, it is

necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial

security concept. Siemens' products and solutions constitute one element of such a concept.

Customers are responsible for preventing unauthorized access to their plants, systems,

machines and networks. Such systems, machines and components should only be

connected to an enterprise network or the internet if and to the extent such a connection is

necessary and only when appropriate security measures (e.g. firewalls and/or network

segmentation) are in place.

For additional information on industrial security measures that may be implemented, please

visit (http://www.siemens.com/industrialsecurity).

Siemens' products and solutions undergo continuous development to make them more

secure. Siemens strongly recommends that product updates are applied as soon as they are

available and that the latest product versions are used. Use of product versions that are no

longer supported, and failure to apply the latest updates may increase customers' exposure

to cyber threats.

To stay informed about product updates, subscribe to the Siemens Industrial Security

RSS Feed under (http://www.siemens.com/industrialsecurity).

Preface

CPU 1517T-3 PN/DP (6ES7517-3TP00-0AB0)

Manual, 12/2017, A5E36285525-AB 5

Siemens Industry Online Support

You can find current information on the following topics quickly and easily here:

●

Product support

All the information and extensive know-how on your product, technical specifications,

FAQs, certificates, downloads, and manuals.

●

Application examples

Tools and examples to solve your automation tasks – as well as function blocks,

performance information and videos.

●

Services

Information about Industry Services, Field Services, Technical Support, spare parts and

training offers.

●

Forums

For answers and solutions concerning automation technology.

●

mySupport

Your personal working area in Industry Online Support for messages, support queries,

and configurable documents.

This information is provided by the Siemens Industry Online Support in the Internet

(https://support.industry.siemens.com).

Industry Mall

The Industry Mall is the catalog and order system of Siemens AG for automation and drive

solutions on the basis of Totally Integrated Automation (TIA) and Totally Integrated Power

(TIP).

Catalogs for all the products in automation and drives are available on the Internet

(https://mall.industry.siemens.com).

CPU 1517T-3 PN/DP (6ES7517-3TP00-0AB0)

6Manual, 12/2017, A5E36285525-AB

Table of contents

Preface ...................................................................................................................................................... 4

1 Documentation guide................................................................................................................................. 7

2 Product overview ..................................................................................................................................... 11

2.1 New functions in firmware version V2.5................................................................................. 11

2.2 Applications of the S7-1500 CPU .......................................................................................... 12

2.3 Hardware properties .............................................................................................................. 19

2.4 Firmware functions................................................................................................................. 21

2.5 Operator controls and display elements ................................................................................ 25

2.5.1 Front view of the CPU with closed front flap.......................................................................... 25

2.5.2 Front view of the CPU without front flaps .............................................................................. 27

2.5.3 Rear view of the CPU ............................................................................................................ 28

2.6 Mode selector......................................................................................................................... 28

3 Wiring ...................................................................................................................................................... 29

4 Interrupts, error messages, diagnostics and system alarms .................................................................... 34

4.1 Status and error displays of the CPU..................................................................................... 34

5 Technical specifications........................................................................................................................... 37

A Dimension drawing .................................................................................................................................. 50

A.1 Dimension drawing CPU 1517T-3 PN/DP ............................................................................. 50

CPU 1517T-3 PN/DP (6ES7517-3TP00-0AB0)

Manual, 12/2017, A5E36285525-AB 7

Documentation guide

The documentation for the SIMATIC S7-1500 automation system and the

SIMATIC ET 200MP distributed I/O system is arranged into three areas.

This arrangement enables you to access the specific content you require.

Basic information

The System Manual and Getting Started describe in detail the configuration, installation,

wiring and commissioning of the SIMATIC S7-1500 and ET 200MP systems. The STEP 7

online help supports you in the configuration and programming.

Device information

Product manuals contain a compact description of the module-specific information, such as

properties, wiring diagrams, characteristics and technical specifications.

General information

The function manuals contain detailed descriptions on general topics regarding the

SIMATIC S7-1500 and ET 200MP systems, e.g. diagnostics, communication, motion control,

Web server, OPC UA.

You can download the documentation free of charge from the Internet

(http://w3.siemens.com/mcms/industrial-automation-systems-simatic/en/manual-

overview/Pages/Default.aspx).

Changes and supplements to the manuals are documented in a Product Information.

You can download the product information free of charge from the Internet

(https://support.industry.siemens.com/cs/us/en/view/68052815).

Documentation guide

CPU 1517T-3 PN/DP (6ES7517-3TP00-0AB0)

8Manual, 12/2017, A5E36285525-AB

Manual Collection S7-1500/ET 200MP

The Manual Collection contains the complete documentation on the SIMATIC S7-1500

automation system and the ET 200MP distributed I/O system gathered together in one file.

You can find the Manual Collection on the Internet

(https://support.industry.siemens.com/cs/ww/en/view/86140384).

SIMATIC S7-1500 comparison list for programming languages

The comparison list contains an overview of which instructions and functions you can use for

which controller families.

You can find the comparison list on the Internet

(https://support.industry.siemens.com/cs/ww/en/view/86630375).

"mySupport"

With "mySupport", your personal workspace, you make the best out of your Industry Online

Support.

In "mySupport", you can save filters, favorites and tags, request CAx data and compile your

personal library in the Documentation area. In addition, your data is already filled out in

support requests and you can get an overview of your current requests at any time.

You must register once to use the full functionality of "mySupport".

You can find "mySupport" on the Internet (https://support.industry.siemens.com/My/ww/en).

"mySupport" - Documentation

In the Documentation area in "mySupport" you can combine entire manuals or only parts of

these to your own manual.

You can export the manual as PDF file or in a format that can be edited later.

You can find "mySupport" - Documentation on the Internet

(http://support.industry.siemens.com/My/ww/en/documentation).

"mySupport" - CAx data

In the CAx data area in "mySupport", you can access the current product data for your CAx

or CAe system.

You configure your own download package with a few clicks.

In doing so you can select:

●Product images, 2D dimension drawings, 3D models, internal circuit diagrams, EPLAN

macro files

●Manuals, characteristics, operating manuals, certificates

●Product master data

You can find "mySupport" - CAx data on the Internet

(http://support.industry.siemens.com/my/ww/en/CAxOnline).

Documentation guide

CPU 1517T-3 PN/DP (6ES7517-3TP00-0AB0)

Manual, 12/2017, A5E36285525-AB 9

Application examples

The application examples support you with various tools and examples for solving your

automation tasks. Solutions are shown in interplay with multiple components in the system -

separated from the focus on individual products.

You will find the application examples on the Internet

(https://support.industry.siemens.com/sc/ww/en/sc/2054).

TIA Selection Tool

With the TIA Selection Tool, you can select, configure and order devices for

Totally Integrated Automation (TIA).

This tool is the successor of the SIMATIC Selection Tool and combines the known

configurators for automation technology into one tool.

With the TIA Selection Tool, you can generate a complete order list from your product

selection or product configuration.

You can find the TIA Selection Tool on the Internet

(http://w3.siemens.com/mcms/topics/en/simatic/tia-selection-tool).

SIMATIC Automation Tool

You can use the SIMATIC Automation Tool to perform commissioning and maintenance

activities simultaneously on various SIMATIC S7 stations as a bulk operation independent of

the TIA Portal.

General function overview:

●Network browsing and creation of a table showing the accessible devices in the network.

●Flashing of device LEDs or HMI display to locate a device

●Downloading of addresses (IP, subnet, gateway) to a device

●Downloading the PROFINET name (station name) to a device

●Placing a CPU in RUN or STOP mode

●Setting the time in a CPU to the current time of your PG/PC

●Downloading a new program to a CPU or an HMI device

●Downloading from CPU, downloading to CPU or deleting recipe data from a CPU

●Downloading from CPU or deleting data log data from a CPU

●Backup/restore of data from/to a backup file for CPUs and HMI devices

●Downloading service data from a CPU

●Reading the diagnostics buffer of a CPU

●Performing a CPU memory reset

●Resetting devices to factory settings

●Downloading a firmware update to a device

You can find the SIMATIC Automation Tool on the Internet

(https://support.industry.siemens.com/cs/ww/en/view/98161300).

Documentation guide

CPU 1517T-3 PN/DP (6ES7517-3TP00-0AB0)

10 Manual, 12/2017, A5E36285525-AB

PRONETA

With SIEMENS PRONETA (PROFINET network analysis), you analyze the PROFINET

network during commissioning. PRONETA features two core functions:

●The topology overview independently scans PROFINET network and all connected

components.

●The IO check is a fast test of the wiring and the module configuration of a system.

You can find SIEMENS PRONETA on the Internet

(https://support.industry.siemens.com/cs/ww/en/view/67460624).

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Siemens Controller Handbücher

Siemens

Siemens SIMATIC MICRO-DRIVE PDC1000 Technisches Dokument

Siemens

Siemens RWF50.3 Bedienungsanleitung

Siemens

Siemens 7SR224 Gebrauchs- und Pflegehandbuch

Siemens

Siemens Simatic S7-1500 Stücklistenhandbuch

Siemens

Siemens LOA2 Series Bedienungsanleitung

Siemens

Siemens S7-1200 TELECONTROL Bedienungsanleitung

Siemens

Siemens GEB 1 Series Installationsanleitung

Siemens

Siemens Simatic S7-400 Bedienungsanleitung

Siemens

Siemens SIMATIC HMI TP700 Comfort Bedienungsanleitung

Siemens

Siemens SIMATIC S5 Series Bedienungsanleitung

Siemens

Siemens ERTEC200 Bedienungsanleitung

Siemens

Siemens 7SC80 Bedienungsanleitung

Siemens

Siemens 125-5033 Bedienungsanleitung

Siemens

Siemens SEO520 Bedienungsanleitung

Siemens

Siemens SIPROTEC 5 Gebrauchsanweisung

Siemens

Siemens REA23M Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Siemens

Siemens SIMATIC S7 Benutzerhandbuch

Siemens

Siemens instabus JB520C23 Bedienungsanleitung

Siemens

Siemens SIPROTEC 5 V7.80 Bedienungsanleitung

Siemens

Siemens UP 227 Service-Handbuch

Siemens

Siemens GDB 1 Series Bedienungsanleitung

Siemens

Siemens FDV241 Installations- und Betriebshandbuch

Siemens

Siemens SIKOSTART 3RW35 Handbuch

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Rockwell Automation

Rockwell Automation 1769-L31 Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Samson

Samson Type 5824 Service-Handbuch

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Fishman

Fishman TriplePlay Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung