Siemens SINAMICS S120 Bedienungsanleitung

AC Drive

___________________

SINAMICS

S120

AC Drive

Manual

(GH6), 04/2014

6SL3097

-4AL00-0BP4

Foreword

Fundamental safety

instructions

System overview

Mains connection and line-

side power components

Power Modules

DC link components

Motor-side power

components

Control Units, Control Unit

Adapters and operating

components

Supplementary system

components and encoder

system integration

Accessories

Cabinet design and EMC for

components, Blocksize

format

Service and maintenance

Appendix

Siemens AG

Industry Sector

Postfach 48 48

90026 NÜRNBERG

GERMANY

Order number: 6SL3097-4AL00-0BP4

Ⓟ

04/2014 Subject to change

Legal information

Warning notice system

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent

damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert

symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are

graded according to the degree of danger.

DANGER

indicates that death or severe personal injury will result if proper precautions are not taken.

WARNING

indicates that death or severe personal injury may result if proper precautions are not taken.

CAUTION

indicates that minor personal injury can result if proper precautions are not taken.

NOTICE

indicates that property damage can result if proper precautions are not taken.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will

be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to

property damage.

Qualified Personnel

The product/system described in this documentation may be operated only by

personnel qualified

for the specific

task in accordance with the relevant documentation, in particular its warning notices and safety instructions.

Qualified personnel are those who, based on their training and experience, are capable of identifying risks and

avoiding potential hazards when working with these products/systems.

Proper use of Siemens products

Note the following:

WARNING

Siemens products may only be used for the applications described in the catalog and in the relevant technical

documentation. If products and components from other manufacturers are used, these must be recommended

or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and

maintenance are required to ensure that the products operate safely and without any problems. The permissible

ambient conditions must be complied with. The information in the relevant documentation must be observed.

Trademarks

All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication

may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and software

described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the

information in this publication is reviewed regularly and any necessary corrections are included in subsequent

editions.

AC Drive

Manual, (GH6), 04/2014, 6SL3097-4AL00-0BP4 5

Foreword

SINAMICS documentation

The SINAMICS documentation is organized in the following categories:

●General documentation/catalogs

●User documentation

●Manufacturer/service documentation

More information

Using the following link, you can find information on the topics:

●Ordering documentation/overview of documentation

●Additional links to download documents

●Using documentation online (find and search in manuals/information)

http://www.siemens.com/motioncontrol/docu

Please send any questions about the technical documentation (e.g. suggestions for

improvement, corrections) to the following e-mail address:

docu.motioncontrol@siemens.com

My Documentation Manager

Using the following link, you can find information on how to create your own individual

documentation based on Siemens content, and adapt it for your own machine

documentation:

http://www.siemens.com/mdm

Training

At the following link, you will find information on SITRAIN - training from Siemens for

products, systems, and drive and automation engineering solutions:

http://www.siemens.com/sitrain

FAQs

You can find Frequently Asked Questions in the Service&Support pages under

Product

Support

http://support.automation.siemens.com

Foreword

AC Drive

6Manual, (GH6), 04/2014, 6SL3097-4AL00-0BP4

SINAMICS

You can find information on SINAMICS under:

http://www.siemens.com/sinamics

Usage phases and the available tools/documents

Table 1 Usage phases and the available documents/tools

Usage phase

Document/tool

Orientation

SINAMICS S sales documentation

Planning/engineering •SIZER configuration tool

•Configuration manuals, motors

Decision making/ordering SINAMICS S120 catalogs

•SIMOTION, SINAMICS S120 and Motors for Production

Machines (Catalog PM 21)

•SINAMICS and motors for single-axis drives (catalog D 31)

•SINUMERIK & SINAMICS

Equipment for Machine Tools (Catalog NC 61)

•SINUMERIK 840D sl Type 1B

Equipment for Machine Tools (Catalog NC 62)

Configuring/installation •SINAMICS S120 Equipment Manual for Control Units and

Additional System Components

•SINAMICS S120 Equipment Manual for Booksize Power

Units

•SINAMICS S120 Equipment Manual for Chassis Power

Units

•SINAMICS S120 Equipment Manual for AC Drives

•SINAMICS S120M Equipment Manual Distributed Drive

Technology

•SINAMICS HLA System Manual Hydraulic Drive

Commissioning •STARTER commissioning tool

•SINAMICS S120 Getting Started

•SINAMICS S120 Commissioning Manual

•SINAMICS S120 CANopen Commissioning Manual

•SINAMICS S120 Function Manual

•SINAMICS S120 Safety Integrated Function Manual

•SINAMICS S120/S150 List Manual

•SINAMICS HLA System Manual Hydraulic Drive

Using/operating •SINAMICS S120 Commissioning Manual

•SINAMICS S120/S150 List Manual

•SINAMICS HLA System Manual Hydraulic Drive

Foreword

AC Drive

Manual, (GH6), 04/2014, 6SL3097-4AL00-0BP4 7

Usage phase

Document/tool

Maintenance/Service •SINAMICS S120 Commissioning Manual

•SINAMICS S120/S150 List Manual

List of references •SINAMICS S120/S150 List Manual

Target group

This documentation is intended for machine manufacturers, commissioning engineers, and

service personnel who use the SINAMICS drive system.

Benefits

This Manual provides all the information, procedures and operational instructions required

for commissioning and servicing SINAMICS S120.

Standard scope

The scope of the functionality described in this document can differ from the scope of the

functionality of the drive system that is actually supplied.

●Other functions that are not explained in this documentation may be able to be executed

in the drive system. However, no claim can be made regarding the availability of these

functions when the equipment is first supplied or in the event of servicing.

●The documentation can also contain descriptions of functions that are not available in a

particular product version of the drive system. The functionalities of the supplied drive

system should only be taken from the ordering documentation.

●Extensions or changes made by the machine manufacturer must be documented by the

machine manufacturer.

For reasons of clarity, this documentation does not contain all of the detailed information on

all of the product types. and cannot take into consideration every conceivable type of

installation, operation and service/maintenance.

Technical Support

Country-specific telephone numbers for technical support are provided in the Internet under

Contact

http://www.siemens.com/automation/service&support

EC Declarations of Conformity

The EC Declaration of Conformity for the EMC Directive can be found on the Internet at:

http://support.automation.siemens.com/WW/view/de/21901735/134200

Foreword

AC Drive

8Manual, (GH6), 04/2014, 6SL3097-4AL00-0BP4

The EC Declaration of Conformity for the Low Voltage Directive can be found on the Internet

at:

http://support.automation.siemens.com

There – as a search term – enter the number

22383669

Note

When operated in dry areas, SINAMICS S units conform to the Low

-Voltage Directive

2006/95/EC.

Note

SINAMICS S units comply with the EMC Directive 2004/108/EC in the configuration specified

in the associated EC Declaration of Conformity for EMC and when the EMC installation

guideline provided in the Configuration Manual with Order No. 6FC5297

-0AD30-0xPx is

implemented.

Note

The E

quipment Manual describes a desired state which, if maintained, ensures the required

level of operational reliability and compliance with EMC limit values.

Should there be any deviation from the requirements in the manual, appropriate actions (e.g.

measure

ments) must be taken to check/prove that the required level of operational reliability

and compliance with EMC limit values are ensured.

EMC limit values in South Korea

The EMC limit values to be complied with for South Korea correspond to the limit values of

the EMC product standard for variable-speed electric drives EN 61800-3, Category C2 or

limit value class A, Group 1 according to EN55011. By applying suitable supplementary

measures, the limit values according to Category C2 or according to limit value class A,

Group 1 are maintained. Further, additional measures may be required, for instance, using

an additional radio interference suppression filter (EMC filter). The measures for EMC-

compliant design of the system are described in detail in this manual and in the

Configuration Manual "EMC installation guideline."

The measures for EMC-compliant design of the system are described in detail in this manual

respectively in the Installation Guideline EMC.

Please note that the final statement on compliance with the standard is always provided on

the label attached to each unit.

Spare parts

Spare parts are available on the Internet at:

http://support.automation.siemens.com/WW/view/de/16612315

Foreword

AC Drive

Manual, (GH6), 04/2014, 6SL3097-4AL00-0BP4 9

Explanation of symbols

Table 2 Symbols

Symbol

Meaning

Protective earth (PE)

Ground (e.g. M 24 V)

Functional ground

Equipotential bonding

Foreword

AC Drive

10 Manual, (GH6), 04/2014, 6SL3097-4AL00-0BP4

Andere Handbücher für SINAMICS S120

Inhaltsverzeichnis

Andere Siemens Controller Handbücher

Siemens

Siemens 5WG1 523-1AB04 Bedienungsanleitung

Siemens

Siemens SQK349.00/209 Bedienungsanleitung

Siemens

Siemens SIMATIC S7-1200 Bedienungsanleitung

Siemens

Siemens ACVATIX SAX319.03 Bedienungsanleitung

Siemens

Siemens Simatic S7-1500 Bedienungsanleitung

Siemens

Siemens OpenAir GMA 1 Series Bedienungsanleitung

Siemens

Siemens RDU340 Series Bedienerhandbuch

Siemens

Siemens SINUMERIK 840D Betriebsanleitung

Siemens

Siemens DESIGO RXA20.1 Bedienungsanleitung

Siemens

Siemens SSB161.05UT Bedienungsanleitung

Siemens

Siemens RVP201.0 Bedienungsanleitung

Siemens

Siemens SIMOCODE pro Benutzerhandbuch

Siemens

Siemens LME39 Series Bedienerhandbuch

Siemens

Siemens GDA Series Bedienungsanleitung

Siemens

Siemens SINUMERIK 808D Bedienungsanleitung

Siemens

Siemens N 543D31 Bedienungsanleitung

Siemens

Siemens GDB 1 Series Bedienungsanleitung

Siemens

Siemens SSC61.5U Bedienungsanleitung

Siemens

Siemens OpenAir GND12x.1 Series Service-Handbuch

Siemens

Siemens RMH760 Bedienungsanleitung

Siemens

Siemens SIDS-T40026-00-4AUS Bedienungsanleitung

Siemens

Siemens OpenAir GEB Series Betriebsanleitung

Siemens

Siemens SSA Series Bedienungsanleitung

Siemens

Siemens Desigo RXC39.5 Bedienungsanleitung

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch

Regin

Regin CORRIGO L10 Bedienungsanleitung