Siemens Sirius 3RW44 V.6.2 Bedienungsanleitung

Getting Started

Industrial Controls

Function Block Library Soft Starter SIRIUS 3RW44 for SIMATIC PCS 7

PCS 7 Soft Starter 3RW44 V6.2 / V7.1 / 3RW44 Soft Starter PCS 7 Library V8 Migration V8.0+SP2

Edition 05/2015

Answers for industry.

PCS 7 Library Soft Starter 3RW44

"V6.2" / "V7.1" / "V8 Migration

V8.0+SP2

__________________

Industrial Controls

PCS 7 Library Soft Starter 3RW44

"V6.2" / "V7.1" / "V8 Migration

V8.0+SP2

Getting Started

05/2015

A5E02897713020A/RS-AB/004

Preface

Security information

Introduction

Getting Started

References

List of Abbreviations

Legal information

Warning notice system

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent

damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert

symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are

graded according to the degree of danger.

DANGER

indicates that death or severe personal injury will result if proper precautions are not taken.

WARNING

indicates that death or severe personal injury may result if proper precautions are not taken.

CAUTION

indicates that minor personal injury can result if proper precautions are not taken.

NOTICE

indicates that property damage can result if proper precautions are not taken.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will

be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to

property damage.

Qualified Personnel

The product/system described in this documentation may be operated only by

personnel qualified

for the specific

task in accordance with the relevant documentation, in particular its warning notices and safety instructions.

Qualified personnel are those who, based on their training and experience, are capable of identifying risks and

avoiding potential hazards when working with these products/systems.

Proper use of Siemens products

Note the following:

WARNING

Siemens products may only be used for the applications described in the catalog and in the relevant technical

documentation. If products and components from other manufacturers are used, these must be recommended

or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and

maintenance are required to ensure that the products operate safely and without any problems. The permissible

ambient conditions must be complied with. The information in the relevant documentation must be observed.

Trademarks

All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication

may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and software

described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the

information in this publication is reviewed regularly and any necessary corrections are included in subsequent

editions.

Siemens AG

Division Digital Factory

Postfach 48 48

90026 NÜRNBERG

GERMANY

3ZX1012-0CS16-8AC1

Ⓟ 05/2015 Subject to change

Table of contents

1 Preface ...................................................................................................................................................... 7

2 Security information................................................................................................................................. 11

3 Introduction.............................................................................................................................................. 13

3.1 Introduction .............................................................................................................................13

4 Getting Started ........................................................................................................................................ 15

4.1 Installation...............................................................................................................................15

4.2 HW-Config ..............................................................................................................................16

4.3 CFC.........................................................................................................................................17

4.4 Operator Station......................................................................................................................24

5 References .............................................................................................................................................. 31

6 List of Abbreviations ................................................................................................................................ 33

6.1 Abbreviations ..........................................................................................................................33

PCS 7 Library Soft Starter 3RW44 "V6.2" / "V7.1" / "V8 Migration V8.0+SP2

Getting Started, 05/2015, A5E02897713020A/RS-AB/004 5

Table of contents

PCS 7 Library Soft Starter 3RW44 "V6.2" / "V7.1" / "V8 Migration V8.0+SP2

6Getting Started, 05/2015, A5E02897713020A/RS-AB/004

Preface

Brief description

The Getting Started of the PCS 7 library for SIRIUS soft starter uses a simple example

project to show you the basic procedures:

●Basic configuration steps

●Handling and monitoring different signal blocks

●Parameterization

This Getting Started serves as an introduction and largely dispenses with detailed

information and background information.

Requirements

Basic knowledge of how to create a PCS 7 project. You can find information on creating a

project in the following documents:

●For PCS 7 V6.1:

"SIMATIC PCS 7 Process Control System V6.0 Getting Started - First Steps

Documentation"

●For PCS 7 V7.0:

"SIMATIC PCS 7 Process Control System V7.0 Getting Started - First Steps

Documentation"

●For PCS 7 V7.1:

"Process Control System PCS 7 Getting Started Part 1 (V7.1)"

"Process Control System PCS 7 Getting Started Part 2 (V7.1)"

●For PCS 7 V8.0:

"Process Control System PCS 7 Getting Started Part 1 (V8.0)"

"Process Control System PCS 7 Getting Started Part 2 (V8.0)".

Conventions

This documentation contains designations of the software interface elements. If you have

installed a multi-language package for the operating system, some of the designations will

be displayed in the base language of the operating system after a language switch and will,

therefore, differ from the designations used in this documentation.

PCS 7 Library Soft Starter 3RW44 "V6.2" / "V7.1" / "V8 Migration V8.0+SP2

Getting Started, 05/2015, A5E02897713020A/RS-AB/004 7

Preface

Software required for the Getting Started of the PCS 7 block library for soft starters

●You can execute the example project on any PC or programming device on which the

following software is installed:

–Windows operating system

–Internet Explorer

–Message Queuing service

–SQL server

Note

The versions required conform to the version of PCS 7 installed.

You can find further relevant details in the following manuals:

–"SIMATIC Process Control System PCS 7 PC Configuration and Authorization"

–"SIMATIC Process Control System PCS 7 V7.0 Released Modules"

–"SIMATIC Process Control System PCS 7 V6.1 Released Modules"

–SIMATIC Process Control System PCS 7 Released Modules (V7.1)

–SIMATIC Process Control System PCS 7 Released modules (V8.0)

●You create the PCS 7 project with the SIMATIC Manager.

To create a project in PCS 7, follow the instructions in the documentation "Process

Control System SIMATIC PCS 7 V6.0 Getting Started - First Steps Documentation" or

"Process Control System SIMATIC PCS 7 V7.0 Getting Started - First Steps

Documentation".

For PCS 7 V7.1:

"Process Control System PCS 7 Getting Started (V7.1)"

For PCS 7 V8.0:

"Process Control System PCS 7 Getting Started (V8.0)".

You can find these documents under

Start > SIMATIC > Documentation > English.

PCS 7 Library Soft Starter 3RW44 "V6.2" / "V7.1" / "V8 Migration V8.0+SP2

8Getting Started, 05/2015, A5E02897713020A/RS-AB/004

Preface

Hardware required for creating an example project

Table 1- 1 Soft Starter hardware

Order number

Description

3RW4422-1BC44 SIRIUS Soft Starter, values with 400 V, 40 DEG., Standard: 29 A, 15 KW,

inside-delta circuit: 50 A, 22 KW, 200 … 460 V AC, 230 V AC, screw termi-

nals

3RW4900-0KC00 Communication board PROFIBUS for SIRIUS Soft Starter 3RW44

Note on the firmware version

If the soft starter is operated as a DP slave following a Y link with a firm-

ware version <=*E03*, no DPV1 functionality is available. Firmware version

<=*E04* is required for DPV1 functionality following a Y link.

Table 1- 2 Hardware - Automation station 1: Configuration direct on the master system

Order number

Description

6ES7416-3XL04-0AB0 SIMATIC S7-400, CPU 416-3 central processing unit,

e.g. with PROFIBUS DP interface

6ES7407-0KA01-0AA0 SIMATIC S7-400, Power Supply PS 407-10 A, UC 120 / 230 V,

DC 5 V / 10 A

Note

Creating a PCS 7 project

Create the PCS

7 project with the automation station (AS) hardware listed in the table above

this note.

Table 1- 3 Hardware - Automation station 2: Configuration following a Y-link

Order number

Description

6ES7654-2PG67-0XC0

SIMATIC PCS 7 AS417-4-2H for H systems

6ES7407-0KR00-0AA0 SIMATIC S7-400, Power Supply PS 407, 10 A for redundant use

6ES7153-2BA82-0XB0 SIMATIC DP, INTERFACE DP/PA LINK and ET 200M IM153-2 HIGH

FEATURE for H systems

6ES7197-1LB00-0XA0

SIMATIC S7, Y-coupler for building up a Y-link for redundant controllers

PCS 7 Library Soft Starter 3RW44 "V6.2" / "V7.1" / "V8 Migration V8.0+SP2

Getting Started, 05/2015, A5E02897713020A/RS-AB/004 9

Preface

PCS 7 Library Soft Starter 3RW44 "V6.2" / "V7.1" / "V8 Migration V8.0+SP2

10 Getting Started, 05/2015, A5E02897713020A/RS-AB/004

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Siemens Controller Handbücher

Siemens

Siemens SSA955 Bedienungsanleitung

Siemens

Siemens SITRANS L Administratorhandbuch

Siemens

Siemens SIRIUS 3RW40 Bedienungsanleitung

Siemens

Siemens OpenAir GEB Series Bedienungsanleitung

Siemens

Siemens SIMATIC 500 Bedienungsanleitung

Siemens

Siemens SIRIUS 3SX5100-2F Bedienungsanleitung

Siemens

Siemens SIMOTION D410 Kurzanleitung

Siemens

Siemens SINAMICS S120 Kurzanleitung

Siemens

Siemens SIPROTEC 5 Bedienungs- und Montageanleitung

Siemens

Siemens DESIGO PX Bedienungsanleitung

Siemens

Siemens SIMATIC WinAC Slot 412 Bedienungsanleitung

Siemens

Siemens GAMMA wave GE 561/01 Bedienungsanleitung

Siemens

Siemens 3VL971 Series Bedienungsanleitung

Siemens

Siemens ECOFAST 3RK1323 Series Bedienungsanleitung

Siemens

Siemens SIPROTEC 5 V7.80 Bedienungsanleitung

Siemens

Siemens SSC Series Bedienungsanleitung

Siemens

Siemens RVL481 Bedienungsanleitung

Siemens

Siemens BACnet PTEC Dual Duct 2 AVS Bedienungsanleitung

Siemens

Siemens RAJA+ Leitfaden

Siemens

Siemens SINUMERIK 840D sl Stücklistenhandbuch

Siemens

Siemens RCM-1 Service-Handbuch

Siemens

Siemens EM 300 Bedienungsanleitung

Siemens

Siemens sinamics dcp Bedienungsanleitung

Siemens

Siemens SIRIUS Series Benutzerhandbuch

Beliebte Controller Handbücher anderer Marken

Digiplex

Digiplex DGP-848 Betriebsanleitung

YASKAWA

YASKAWA SGM series Bedienungsanleitung

Sinope

Sinope Calypso RM3500ZB Bedienungsanleitung

Isimet

Isimet DLA Series Style 2 Installationshandbuch

LSIS

LSIS sv-ip5a Bedienungsanleitung

Airflow

Airflow Uno hab Bedienungsanleitung

ABB

ABB ACS580-01 drives Bedienungsanleitung

Panasonic

Panasonic GM1 Series Bedienungsanleitung

Emerson

Emerson SW93 Bedienungsanleitung

AutoAqua

AutoAqua Smart ATO micro SATO-120P Bedienungsanleitung

Panasonic

Panasonic FP? Positioning Unit RTEX Bedienungsanleitung

Alpha IP

Alpha IP MIOB 21001 Bedienungsanleitung

Surecom

Surecom SR-629 Bedienungsanleitung

Regulus

Regulus SRS1 T Bedienungsanleitung

3M MicroTouch EX113 Bedienungsanleitung

KUHN

KUHN TKS Bedienungsanleitung

S&C

S&C PMH Bedienungs- und Wartungshandbuch

Regin

Regin CORRIGO L10 Bedienungsanleitung