Siemens SIMATIC ET 200SP HA Bedienungsanleitung

SIMATIC

ET 200SP HA

Digital input module DI

8x24...125VDC HA

(6DL1131-6DF00-0PK0)

Manual

11/2017

A5E39288633-AB

Security information 1

Product overview 2

Wiring 3

Parameters 4

Displays and interrupts 5

Technical specifications 6

Drivers, parameters,

diagnostics messages and

address space A

Legal information

Warning notice system

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent

damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert

symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are

graded according to the degree of danger.

DANGER

indicates that death or severe personal injury will result if proper precautions are not taken.

WARNING

indicates that death or severe personal injury may result if proper precautions are not taken.

CAUTION

indicates that minor personal injury can result if proper precautions are not taken.

NOTICE

indicates that property damage can result if proper precautions are not taken.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will be

used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to property

damage.

Qualified Personnel

The product/system described in this documentation may be operated only by personnel qualified for the specific

task in accordance with the relevant documentation, in particular its warning notices and safety instructions. Qualified

personnel are those who, based on their training and experience, are capable of identifying risks and avoiding

potential hazards when working with these products/systems.

Proper use of Siemens products

Note the following:

WARNING

Siemens products may only be used for the applications described in the catalog and in the relevant technical

documentation. If products and components from other manufacturers are used, these must be recommended or

approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and

maintenance are required to ensure that the products operate safely and without any problems. The permissible

ambient conditions must be complied with. The information in the relevant documentation must be observed.

Trademarks

All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication

may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and software described.

Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the information in

this publication is reviewed regularly and any necessary corrections are included in subsequent editions.

Siemens AG

Division Process Industries and Drives

Postfach 48 48

90026 NÜRNBERG

GERMANY

A5E39288633-AB

Ⓟ 01/2018 Subject to change

Table of contents

1 Security information......................................................................................................................................5

2Product overview..........................................................................................................................................7

2.1 Properties of the I/O module DI 8x24…125VDC HA................................................................7

3Wiring...........................................................................................................................................................9

3.1 Pin assignment of the I/O module DI 8x24…125VDC HA.......................................................9

3.2 Schematic circuit diagram......................................................................................................11

4 Parameters.................................................................................................................................................13

4.1 Parameters of the I/O module DI 8x24…125VDC HA...........................................................13

4.2 Module/channel parameters...................................................................................................14

4.3 Explanation of the module/channel parameters.....................................................................16

5 Displays and interrupts...............................................................................................................................17

5.1 Status and error displays of the I/O module DI 8x24…125VDC HA......................................17

5.2 Interrupts................................................................................................................................20

6 Technical specifications..............................................................................................................................21

A Drivers, parameters, diagnostics messages and address space...............................................................25

A.1 Concept of the driver and diagnostics blocks.........................................................................25

A.2 Parameter assignment...........................................................................................................27

A.3 Parameter assignment and structure of the module/channel parameters.............................29

A.4 Diagnostics messages and maintenance events...................................................................32

A.5 Hardware interrupts................................................................................................................34

A.6 Address space.......................................................................................................................35

A.7 Address space of the time stamping (accuracy 1 ms)...........................................................36

Index...........................................................................................................................................................37

Digital input module DI 8x24...125VDC HA (6DL1131-6DF00-0PK0)

Manual, 11/2017, A5E39288633-AB 3

Table of contents

Digital input module DI 8x24...125VDC HA (6DL1131-6DF00-0PK0)

4Manual, 11/2017, A5E39288633-AB

Security information [ID: 90983944203] 1

Siemens provides products and solutions with industrial security functions that support the

secure operation of plants, systems, machines, and networks.

In order to protect plants, systems, machines and networks against cyber threats, it is

necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial

security concept. Siemens’ products and solutions constitute one element of such a concept.

Customers are responsible for preventing unauthorized access to their plants, systems,

machines and networks. Such systems, machines and components should only be connected

to an enterprise network or the internet if and to the extent such a connection is necessary

and only when appropriate security measures (e.g. firewalls and/or network segmentation) are

in place.

For additional information on industrial security measures that may be implemented, please

visit:

https://www.siemens.com/industrialsecurity

Siemens’ products and solutions undergo continuous development to make them more secure.

Siemens strongly recommends that product updates are applied as soon as they are available

and that the latest product versions are used. Use of product versions that are no longer

supported, and failure to apply the latest updates may increase customer’s exposure to cyber

threats.

To stay informed about product updates, subscribe to the Siemens Industrial Security RSS

Feed under

https://www.siemens.com/industrialsecurity.

Validity of the documentation

This equipment manual describes the I/O module DI 8x24…125VDC HA with the article

number 6DL1 131-6DF00-0PK0.

It supplements the system manual ET 200SP HA distributed I/O system.

Functions that generally relate to the system are described in this manual.

The information in this device manual and the system/function manuals help you to commission

the ET 200SP HA.

Appendices

The appendices provide information that is relevant for using the ET 200SP HA outside the

PCS 7 environment.

Digital input module DI 8x24...125VDC HA (6DL1131-6DF00-0PK0)

Manual, 11/2017, A5E39288633-AB 5

Conventions

Please also observe notes marked as follows:

Note

A note contains important information on the product described in the documentation, on the

handling of the product and on the section of the documentation to which particular attention

should be paid.

Security information

Digital input module DI 8x24...125VDC HA (6DL1131-6DF00-0PK0)

6Manual, 11/2017, A5E39288633-AB

Product overview 2

2.1 Properties of the I/O module DI 8x24…125VDC HA [ID: 80184473739]

View of the module

DIAG MT

DI HA

8x24 ..12 5 VDC

DI . 6 +

DI . 0 +

DI . 2+

DI . 4 +

1P1

L+

24 VD C

1P2

2P1

L+

24 VD C

2P 2

MA X. 10 A

.0 .1

V 1.0 .0

CC 42

PW R

6DL1131-6DF00 -0PK 0

X 2

3 4

DI .7+

DI .1+

DI . 3 +

DI . 5 +

15 16

910

11 12

13 14

F0 F 1

.2 . 3

F2 F 3

.4 . 5

F4 F 5

.6 .7

F6 F 7



①Module type and designation ⑧Module type color coding

②LED for diagnostics ⑨Product version

③LED for maintenance ⑩Function status and firmware version

④2D matrix code ⑪Color code for selection of the color-coded labels

⑤Wiring diagram ⑫Serial number

⑥LEDs for channel status/channel

fault

⑬Article number

⑦LED for supply voltage

Figure 2-1 View of DI 8×24...125VDC HA

Digital input module DI 8x24...125VDC HA (6DL1131-6DF00-0PK0)

Manual, 11/2017, A5E39288633-AB 7

Properties

The I/O module has the following technical properties:

● 8 digital inputs electrically isolated from the backplane bus and supply voltage L+/M groups

of 8

● Digital input with the following parameterizable properties

– Diagnostics

– Input delay

– Hardware interrupts for positive and negative edges

● Nominal input voltage range 24 to 125 V DC

● Module-specific configurable diagnostics for missing supply voltage L+

● Suitable for connecting switches and 2-/ 3-/4-wire sensors in accordance with IEC 61131,

type 1 and 3

The I/O module supports the following functions:

● Firmware update

● I&M identification data

● Parameter reassignment in RUN

● Value status

● Time stamping (accuracy 1 ms)

You can configure the I/O module with HW Config and integrate it into your system.

WARNING

Danger of electric current!

This may result in death or severe injury.

Electrical hazard arises with electric circuits operated with voltages >30 Veff and 42.4 Vpeak or

60 VDC.

Accessories

The following accessories must be ordered separately:

● Labeling strips

● Color-coded labels

● Reference identification label

● Shield connector

Product overview

2.1 Properties of the I/O module DI 8x24…125VDC HA

Digital input module DI 8x24...125VDC HA (6DL1131-6DF00-0PK0)

8Manual, 11/2017, A5E39288633-AB

Wiring 3

3.1 Pin assignment of the I/O module DI 8x24…125VDC HA [ID: 80184505355]

Terminal blocks

You can operate the I/O module with the following terminal blocks:

● 6DL1193-6TP00-0DK0, light-colored

● 6DL1193-6TP00-0BK0, dark-colored

The terminal block is not included in the scope of delivery of the I/O module and must be

ordered separately.

Note

You can find additional information on the configuration in the system manual.

Digital input module DI 8x24...125VDC HA (6DL1131-6DF00-0PK0)

Manual, 11/2017, A5E39288633-AB 9

General pin assignment

Table 3-1 Terminal assignment of the DI 8×24...125VDC HA

Terminal Assignment Terminal Assignment Explanations

1DI02DI1DIn: Input signal, channel n

2M: Signal voltage

1P1: Supply voltage L+ of the voltage bus 1P

2P1: Supply voltage L+ of the voltage bus 2P

1P2: Ground reference of the voltage bus 1P

2P2: Ground reference of the voltage bus 2P

DI.6+

DI.0+

DI.2+

DI.4 +

1P1

L+

24VDC

1P2

2P1

L+

24VDC

2P2

MA X. 10 A

DI.7+

DI.1+

DI.3+

DI.5+

15 16

910

11 12

13 14

3DI24DI3

5DI46DI5

7DI68DI7

92M 10 2M

11 2M 12 2M

13 2M 14 2M

15 2M 16 2M

1P1 L+ 1P2 M

2P1 L+ 2P2 M

Notice

Note differences in potential

The load supply voltage and the signal voltage of the I/O module are elec‐

trically isolated.

● The connection of the load supply voltage and the signal voltage is

only permissible when no compensating currents are flowing as a

result of a difference in potential.

● The connection of additional, external devices to terminals with the

assignment 2M is not permissible. The additional load may result in

the destruction of the I/O module as well as further faults.

2-wire

//',01Q

Connection of a digital 2-wire sensor

Wiring

3.1 Pin assignment of the I/O module DI 8x24…125VDC HA

Digital input module DI 8x24...125VDC HA (6DL1131-6DF00-0PK0)

10 Manual, 11/2017, A5E39288633-AB

Andere Handbücher für SIMATIC ET 200SP HA

Inhaltsverzeichnis

Andere Siemens E/A-System Handbücher

Siemens

Siemens Simatic S7-1500 Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP HA Technisches Dokument

Siemens

Siemens SIMATIC PM-E Bedienungsanleitung

Siemens

Siemens Simatic S7-1500 Bedienungsanleitung

Siemens

Siemens SIMADYN D EB11 Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP HA Bedienungsanleitung

Siemens

Siemens Simatic S7-300 Bedienungsanleitung

Siemens

Siemens N 263E11 Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP 6ES7134-6GD01-0BA1 Bedienungsanleitung

Siemens

Siemens Binary Input N 260 Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200S Bedienungsanleitung

Siemens

Siemens Simatic S7-1500 / ET 200MP Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200eco PN Technisches Dokument

Siemens

Siemens ZN-31U Bedienungsanleitung

Siemens

Siemens Simatic S7-1500 Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP Benutzerhandbuch

Siemens

Siemens SIMATIC ET 200SP Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200S Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200iSP Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200C Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP Technisches Dokument

Beliebte E/A-System Handbücher anderer Marken

WAGO

WAGO 750-344 Bedienungsanleitung

Teknim

Teknim TWM-1887 Bedienungsanleitung

Intelligent Appliance

Intelligent Appliance IA-2662-E Bedienungsanleitung

BERGHOF

BERGHOF ECC DIO 16/16 Bedienungsanleitung

Advantech

Advantech PCM-27J3AU Installations- und Betriebshandbuch

Festo

Festo CP-E08-M12-CL Bedienungsanleitung

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Bedienungsanleitung

Hitachi

Hitachi HX-RIO3 Series Bedienungsanleitung

NUUO

NUUO SCB-A08 Bedienungsanleitung

M-system

M-system R3Y-RS8 Bedienungsanleitung

jablotron

jablotron JB-110N Bedienungsanleitung

Omron

Omron SYSMAC C200H Bedienungsanleitung

DOLD

DOLD SAFEMASTER M Bedienungsanleitung

ABB

ABB OPT-MF-001 Bedienungsanleitung

Omron

Omron SYSMAC C2000H Bedienungsanleitung

Helmholz

Helmholz TB20 Bedienungsanleitung

ICP DAS USA

ICP DAS USA tM-AD2 Bedienungsanleitung

Automationdirect.com

Automationdirect.com DL305 Bedienungsanleitung