Siemens SIMATIC ET 200SP Bedienungsanleitung

CPU 1510SP F-1 PN

(6ES7510-1SJ00-0AB0)

___________________

___________

___________________

SIMATIC

ET 200SP

CPU 1510SP F-1 PN

(6ES7510-1SJ00-0AB0)

Manual

12/2014

A5E35264953

-AA

Preface

Documentation guide

Product overview

Wiring

Interrupts, error messages,

diagnostics and system

alarms

Technical specifications

Dimension drawing

Siemens AG

Division Digital Factory

Postfach 48 48

90026 NÜRNBERG

GERMANY

A5E35264953-AA

Ⓟ

12/2014 Subject to change

Legal information

Warning notice system

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent

damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert

symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are

graded according to the degree of danger.

DANGER

indicates that death or severe personal injury will result if proper precautions are not taken.

WARNING

indicates that death or severe personal injury may result if proper precautions are not taken.

CAUTION

indicates that minor personal injury can result if proper precautions are not taken.

NOTICE

indicates that property damage can result if proper precautions are not taken.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will

be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to

property damage.

Qualified Personnel

The product/system described in this documentation may be operated only by

personnel qualified

for the specific

task in accordance with the relevant documentation, in particular its warning notices and safety instructions.

Qualified personnel are those who, based on their training and experience, are capable of identifying risks and

avoiding potential hazards when working with these products/systems.

Proper use of Siemens products

Note the following:

WARNING

Siemens products may only be used for the applications described in the catalog and in the relevant technical

documentation. If products and components from other manufacturers are used, these must be recommended

or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and

maintenance are required to ensure that the products operate safely and without any problems. The permissible

ambient conditions must be complied with. The information in the relevant documentation must be observed.

Trademarks

All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication

may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and software

described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the

information in this publication is reviewed regularly and any necessary corrections are included in subsequent

editions.

CPU 1510SP F-1 PN (6ES7510-1SJ00-0AB0)

4Manual, 12/2014, A5E35264953-AA

Preface

Purpose of the documentation

This manual supplements the ET 200SP distributed I/O system

(http://support.automation.siemens.com/WW/view/en/58649293) system manual as well as

the function manuals. All system-wide functions are described in the system manual and in

the function manuals.

The information provided in this manual and the system manual allows you to commission

the CPU 1510SP F-1 PN.

The creation of the safety program and activation of safety operation are described in the

configuration and programming manual SIMATIC Safety - Configuring and Programming

(http://support.automation.siemens.com/WW/view/en/54110126).

Conventions

STEP 7: In this documentation, "STEP 7" is used as a synonym for all versions of the

configuration and programming software "STEP 7 (TIA Portal)".

When this device manual refers to the CPU 1510SP-1 PN, we are actually referring to the

CPU 1510SP F-1 PN.

Please also observe the notes marked as follows:

Note

A note contains important information on the product described in the documentation, on

handling the product or on the part of the documentation to which particular attention should

be paid.

Security information

Siemens provides products and solutions with industrial security functions that support the

secure operation of plants, solutions, machines, equipment and/or networks. They are

important components in a holistic industrial security concept. With this in mind, Siemens’

products and solutions undergo continuous development. Siemens recommends strongly

that you regularly check for product updates.

For the secure operation of Siemens products and solutions, it is necessary to take suitable

preventive action (e.g. cell protection concept) and integrate each component into a holistic,

state-of-the-art industrial security concept. Third-party products that may be in use should

also be considered. You can find more information about industrial security on the Internet

(http://www.siemens.com/industrialsecurity).

To stay informed about product updates as they occur, sign up for a product-specific

newsletter. You can find more information on the Internet

(http://support.automation.siemens.com).

CPU 1510SP F-1 PN (6ES7510-1SJ00-0AB0)

Manual, 12/2014, A5E35264953-AA 5

Table of contents

Preface ................................................................................................................................................... 4

1 Documentation guide .............................................................................................................................. 6

2 Product overview .................................................................................................................................... 8

2.1 Operating principle....................................................................................................................8

2.2 Properties..................................................................................................................................9

2.3 Differences between F-CPU 1510SP F-1 PN and standard CPU 1510SP-1 PN...................12

2.4 Operating and display elements .............................................................................................14

2.4.1 Front view of the module with BusAdapter .............................................................................14

2.5 Mode switch ............................................................................................................................15

2.6 Functions ................................................................................................................................15

2.6.1 PROFINET IO .........................................................................................................................15

2.6.2 PROFIenergy ..........................................................................................................................16

2.6.3 PROFIBUS DP........................................................................................................................17

2.6.4 Memory reset ..........................................................................................................................18

2.6.5 Restoring the factory settings of the CPU...............................................................................19

3 Wiring ................................................................................................................................................... 22

4 Interrupts, error messages, diagnostics and system alarms................................................................... 27

4.1 Status and error display of the CPU .......................................................................................27

5 Technical specifications ........................................................................................................................ 30

5.1 Technical specifications..........................................................................................................30

A Dimension drawing ............................................................................................................................... 40

CPU 1510SP F-1 PN (6ES7510-1SJ00-0AB0)

6Manual, 12/2014, A5E35264953-AA

Documentation guide

The documentation for the SIMATIC ET 200SP distributed I/O system is arranged into three

areas.

This arrangement enables you to access the specific content you require.

Basic information

The system manual describes in detail the configuration, installation, wiring and

commissioning of the SIMATIC ET 200SP. distributed I/O system. The STEP 7 online help

supports you in the configuration and programming.

Device information

Product manuals contain a compact description of the module-specific information, such as

properties, terminal diagrams, characteristics and technical specifications.

General information

The function manuals contain detailed descriptions on general topics regarding the SIMATIC

ET 200SP distributed I/O system, e.g. diagnostics, communication, Web server, designing

interference-free controllers.

You can download the documentation free of charge from the Internet

(http://w3.siemens.com/mcms/industrial-automation-systems-simatic/en/manual-

overview/tech-doc-et200/Pages/Default.aspx).

Changes and supplements to the manuals are documented in a Product Information.

Documentation guide

CPU 1510SP F-1 PN (6ES7510-1SJ00-0AB0)

Manual, 12/2014, A5E35264953-AA 7

Manual Collection ET 200SP

The Manual Collection contains the complete documentation on the SIMATIC ET 200SP

distributed I/O system gathered together in one file.

You can find the Manual Collection on the Internet

(http://support.automation.siemens.com/WW/view/en/84133942).

My Documentation Manager

The My Documentation Manager is used to combine entire manuals or only parts of these to

your own manual.

You can export the manual as PDF file or in a format that can be edited later.

You can find the My Documentation Manager on the Internet

(http://support.automation.siemens.com/WW/view/en/38715968).

Applications & Tools

Applications & Tools supports you with various tools and examples for solving your

automation tasks. Solutions are shown in interplay with multiple components in the system -

separated from the focus in individual products.

You can find Applications & Tools on the Internet

(http://support.automation.siemens.com/WW/view/en/20208582).

CAx Download Manager

The CAx Download Manager is used to access the current product data for your CAx or CAe

systems.

You configure your own download package with a few clicks.

In doing so you can select:

●Product images, 2D dimension drawings, 3D models, internal circuit diagrams, EPLAN

macro files

●Manuals, characteristics, operating manuals, certificates

●Product master data

You can find the CAx Download Manager on the Internet

(http://support.automation.siemens.com/WW/view/en/42455541).

TIA Selection Tool

With the TIA Selection Tool, you can select, configure and order devices for Totally

Integrated Automation (TIA).

This tool is the successor of the SIMATIC Selection Tool and combines the known

configurators for automation technology into one tool.

With the TIA Selection Tool, you can generate a complete order list from your product

selection or product configuration.

You can find the TIA Selection Tool on the Internet

(http://w3.siemens.com/mcms/topics/en/simatic/tia-selection-tool).

CPU 1510SP F-1 PN (6ES7510-1SJ00-0AB0)

8Manual, 12/2014, A5E35264953-AA

Product overview

2.1

Operating principle

The CPU includes the operating system and executes the user program. The user program

is located on the SIMATIC memory card and is processed in the CPU work memory.

The PROFINET interfaces available on the CPU enable simultaneous communication with

PROFINET devices, PROFINET controllers, HMI devices, programming devices, other

controllers and additional systems. The CPU 1510SP-1 PN supports operation as an IO

controller, I-device or standalone CPU.

With its optional PROFIBUS interface, CM DP, CPU 1510SP-1 PN supports the

configuration of PROFIBUS networks in addition to PROFINET IO. When you use the

interface as a PROFIBUS DP interface, you can configure the CPU 1510SP-1 PN as a DP

master or as an intelligent DP slave (I-slave).

IO controller

CPU 1510SP-1 PN sends and receives data from the connected IO devices within a

PROFINET IO system. You can operate the CPU with up to 64 connected IO devices.

I-device

The "I-device" (intelligent IO device) functionality allows you to exchange data with an IO

controller. CPU 1510SP-1 PN thus fulfills the role of an intelligent distributed pre-processing

unit for sub-processes. The I-device is connected as an IO device to a higher-level IO

controller for this purpose.

Advantages:

●Interference-resistant configuration due to short signal and encoder wiring

●Reduced wiring requirements for transmission of the data via PROFINET

Standalone CPU

You can also use the CPU 1510SP-1 PN in the ET 200SP distributed I/O system as a

"central system" without a higher-level controller.

DP master

To use the ET 200SP as a DP master, you need the CPU and the optional communication

module, CM DP. When used as a DP master, ET 200SP exchanges data with the connected

DP slaves via PROFIBUS DP.

Product overview

2.2 Properties

CPU 1510SP F-1 PN (6ES7510-1SJ00-0AB0)

Manual, 12/2014, A5E35264953-AA 9

Intelligent DP slave (I-slave)

To use the ET 200SP as an intelligent DP slave (I-slave), you need the CPU and the optional

communication module, CM DP. As an I-slave, ET 200SP is connected via PROFIBUS DP

to the higher-level DP master and exchanges data with it.

2.2

Properties

Article number

6ES7510-1SJ00-0AB0

View of the module

The following figure shows the CPU 1510SP F-1 PN.

Figure 2-1 CPU 1510SP F-1 PN

Product overview

2.2 Properties

CPU 1510SP F-1 PN (6ES7510-1SJ00-0AB0)

10 Manual, 12/2014, A5E35264953-AA

Properties

The CPU 1510SP F-1 PN has the following technical properties:

●Communication:

–Interfaces

The CPU 1510SP F-1 PN has a PROFINET interface (X1) with an integrated 3-port

switch. Port 1 and port 2 are located on the pluggable BusAdapter. Port 3 is integrated

in the housing of the CPU. The CPU supports the BusAdapters BA 2xRJ45 and

BA 2xFC. You connect the PROFINET IO to the CPU via the BusAdapter. Port 1 and

port 2 can also be used as ring ports for the configuration of redundant ring structures

in Ethernet (media redundancy).

Note

The CPU is delivered without a BusAdapter. You can find the article numbers of

the

supported BusAdapters in the "Accessories/spare parts" section of the ET

200SP

Distributed I/O system

(

http://support.automation.siemens.com/WW/view/en/58649293) system manual.

The PROFINET interface supports PROFINET IO RT (Realtime) and IRT

(Isochronous Realtime) in addition to PROFINET basic functionality. PROFINET IO

communication or real-time settings can be configured on the interface.

The CM DP is optionally available with a PROFIBUS interface (X2). You can find more

information about this expansion module in the manual CM DP communication

module (http://support.automation.siemens.com/WW/view/en/90156526).

You can find information about connecting the PROFINET IO BusAdapter to the CPU

as well as connecting the optional PROFIBUS interface to the interface module in the

system manual ET 200SP distributed I/O system

(http://support.automation.siemens.com/WW/view/en/58649293).

●Integrated Web server:

The CPU is accessible via an integrated Web server for diagnostic purposes. You can

read the following information with the Web server:

–Start page with general CPU information

–Identification information

–Contents of the diagnostics buffer

–Querying module information

–Alarms (without acknowledgment option)

–Information about communication

–PROFINET topology

–Tag status

–Watch tables

–Memory usage

–Data logs (if used)

Andere Handbücher für SIMATIC ET 200SP

101

Inhaltsverzeichnis

Andere Siemens E/A-System Handbücher

Siemens

Siemens SIMATIC ET 200SP Bedienungsanleitung

Siemens

Siemens SIMATIC SM 335 Bedienungsanleitung

Siemens

Siemens SIMATIC PCS 7 Kurzanleitung

Siemens

Siemens SIMATIC ET 200SP Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP Bedienungsanleitung

Siemens

Siemens SICAM A8000 Series Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP 6ES7134-6GD01-0BA1 Bedienungsanleitung

Siemens

Siemens 6ES7521-1BL00-0AA0 Bedienungsanleitung

Siemens

Siemens Simatic 6DL2804-0 Series Bedienungsanleitung

Siemens

Siemens FDCI221 Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200S Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200S Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200eco PN Technisches Dokument

Siemens

Siemens SIMATIC ET 200SP Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP HA Bedienungsanleitung

Siemens

Siemens Simatic series Bedienungsanleitung

Siemens

Siemens TX-I/O Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200S Bedienungsanleitung

Siemens

Siemens PPM-1U32.BPR Bedienungsanleitung

Siemens

Siemens Simatic S7-1500 Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200S Bedienungsanleitung

Siemens

Siemens SIMATIC ET 200SP Bedienungsanleitung

Beliebte E/A-System Handbücher anderer Marken

WAGO

WAGO 750-344 Bedienungsanleitung

Teknim

Teknim TWM-1887 Bedienungsanleitung

Intelligent Appliance

Intelligent Appliance IA-2662-E Bedienungsanleitung

BERGHOF

BERGHOF ECC DIO 16/16 Bedienungsanleitung

Advantech

Advantech PCM-27J3AU Installations- und Betriebshandbuch

Festo

Festo CP-E08-M12-CL Bedienungsanleitung

Measurement Computing

Measurement Computing PCI-DAS64/M1/16 Bedienungsanleitung

Hitachi

Hitachi HX-RIO3 Series Bedienungsanleitung

NUUO

NUUO SCB-A08 Bedienungsanleitung

M-system

M-system R3Y-RS8 Bedienungsanleitung

jablotron

jablotron JB-110N Bedienungsanleitung

Omron

Omron SYSMAC C200H Bedienungsanleitung

DOLD

DOLD SAFEMASTER M Bedienungsanleitung

ABB

ABB OPT-MF-001 Bedienungsanleitung

Omron

Omron SYSMAC C2000H Bedienungsanleitung

Helmholz

Helmholz TB20 Bedienungsanleitung

ICP DAS USA

ICP DAS USA tM-AD2 Bedienungsanleitung

Automationdirect.com

Automationdirect.com DL305 Bedienungsanleitung