Siemens SITRANS F Bedienungsanleitung

Ultrasonic flowmeters

SITRANS FUE1010 IP65 NEMA 4X

Instruction Manual - September 2008

SITRANS F

Field Manual CQO:1010ENFM-3

July 2008

For use with Operating System

Software Version 3.02.00 or later

SITRANS FUE 1010EN UNIFLOW

ENERGY NEMA

MULTI-FUNCTION FLOWMETER

This equipment contains components that are

susceptible to electrostatic discharge (ESD).

Please observe ESD control measures during

the handling and connection process.

Printed July 2008

Prepared By Date

Engineering Date

IMPORTANT NOTICE

Controlotron is now part of:

Siemens Energy & Automation, Inc.

Process Instrumentation Business Unit (PI BU)

CoC Ultrasonic Flow

Manual Changes

NOTE: For the latest updates and revisions to the FUE1010ENFM-3B field manual go to:

http://support.automation.siemens.com/ and check the Product Manual listing.

MANUAL

ADDENDUM

Manual Addendum

September 2008

1010FMA-56

Operating System Software

Version Update

Manual Addendum 1010FMA-56

Operating System Software Version Update

INTRODUCTION

The following software operating system version update is for Version 3 flowmeters. Please refer to

this addendum when using this technical manual with Version 3 operating system software and

flowmeters that have been updated to Version 5.

Operating System Software Changes

1. The [Meter Type Menu] includes a [Language] menu item that allows the selection of multiple flowmeter

menu foreign languages.

2. Version 3 and Version 5 Operating System Differences

The following table lists the differences between Version 3 and Version 5 operating system menu

items and menu hint lines.

A-1

Version 3 Version 5

Select Pipe Class Pick Pipe Class

Pick/Install Xdcr Install Xdcr

Data/Span/Set/Ca Span/Set/Cal

Strip Chart Setup Display Setup

Dual Channel Flow 2 Channel Flow

Dual Beam Flow Dual Path Flow

Datalogger Setup Logger Setup

Temperature Range Temp Range

Pipe Configuration Pipe Config

Datalogger Setup Logger Setup

Datalogger Mode Logger Mode

Datalogger Data Logger Data

Log Time Interval Logger Interval

Display Datalogger Display Logger

Recall Site Setup Recall Site

Delete Site Setup Delete Site

Install Completed? Install Complete

Estimated Vs m/s Estimated Vs M/S

Channel /Path Setup Channel Setup

Reflexor Zero Fault/Set Zero Fault/Set

Memory Delay (sec) Memory Delay s)

Flow Volume Units Flow Vol. Units

Flow Display Range Flow Disp. Range

Flow Display Scale Flow Disp. Scale

Total Volume Units Total Vol. Units

Batch/Sample Total Batch/Sample Tot

Calibrate Flowrate Calib. Flowrate

Analog Input Setup Analog Inp Setup

Flow Vel F/S Velocity F/S

Vs m/s Vs M/S

Valc % Valc

Vaer % Vaer

Vs Max m/s Vs Max M/S

(continued )

Manual Addendum 1010FMA-56

A-2

Vs Min m/s Vs Min M/S

Channel/Path Setup Chan/Path Setup

Vfmax GAL/MIN Vfmax

Date Site Created: Site Created:

Empty % Empty

Analog Output Trim Analog Out Trim

Pick flowtube size and type Select flowtube

and start operation

Empty Flowtube Set Empty Pipe Set

Version 3 Version 5

Gas Flowmeter Flow and VoS Unit Changes

1. Flowmeter Types

Flowmeter configurations included with this change include all SITRANS F Gas Flowmeters (7ME361*).

2. Flow Units

The table below describes the translation from the current gas flow units to the new gas flow units,

where only Cubic Feet and Cubic Meter volume units are affected. Also note that M = thousands and

MM = millions. Mass units and Velocity units remain unchanged.

Note: The flow legend changes depending upon the selection of Standard Volume enabled or

disabled.

FLOW UNITS

For STD VOLUME disabled For STD VOLUME enabled

Version 3 Version 5 Version 3 Version 5

CU FT/SEC ACFS CU FT/SEC SCFS

CU FT/MIN ACFM CU FT/MIN SCFM

CU FT/HR ACFH CU FT/HR SCFH

CU FT/DAY ACFD CU FT/DAY SCFD

KCU FT/SEC MACFS KCU FT/SEC MSCFS

KCU FT/MIN MACFM KCU FT/MIN MSCFM

KCU FT/HR MACFH KCU FT/HR MSCFH

KCU FT/DAY MACFD KCU FT/DAY MSCFD

MCU FT/SEC MMACFS MCU FT/SEC MMSCFS

MCU FT/MIN MMACFM MCU FT/MIN MMSCFM

MCU FT/HR MMACFH MCU FT/HR MMSCFH

MCU FT/DAY MMACFD MCU FT/DAY MMSCFD

CU M/SEC M3/sec M/SEC NM3/sec

CU M/MIN M3/min CU M/MIN NM3/min

CU M/HR M3/hr CU M/HR NM3/hr

CU M/DAY M3/day CU M/DAY NM3/day

KCU M/SEC E3 M3/sec KCU M/SEC E3 NM3/sec

KCU M/MIN E3 M3/min KCU M/MIN E3 NM3/min

KCU M/HR E3 M3/hr KCU M/HR E3 NM3/hr

KCU M/DAY E3 M3/day KCU M/DAY E3 NM3/day

MCU M/SEC E6 M3/sec MCU M/SEC E6 NM3/sec

MCU M/MIN E6 M3/min MCU M/MIN E6 NM3/min

MCU M/HR E6 M3/hr MCU M/HR E6 NM3/hr

MCU M/DAY E6 M3/day MCU M/DAY E6 NM3/day

Manual Addendum 1010FMA-56

4. Sound Velocity Units

Sound velocity will continue to be reported in units of meters/sec for metric units but will change to

Feet/sec for English unit selection. The flowmeter will display M/S and F/S to represent these two

variations.

Note: The units for Sound Velocity will be based on the [Preferred Units] menu item found in

the [Meter Facilities] menu and can not be changed unless a new site is created.

5. Transducer Model Menu Name

The following table lists the operating system menu item differences between Version 3 Hi Precision

and Version 5 Hi Precision transducer model names that appear on the [Install Xdcr] menu. Note that

T1, T2 and T3 indicate the different temperature ranges of the transducer.

3. Total Units

Total units are similar to flow units.

TOTALIZE UNITS

For STD VOLUME disabled

Version 3 Version 5

CU FT ACF

KCU FT MACF

MCU FT MMACF

CUM M3

KCU M E3 M3

MCU M E6 M3

TOTALIZE UNITS

For STD VOLUME enabled

Version 3 Version 5

CU FT SCF

KCU FT MSCF

MCU FT MMSCF

CUM NM3

KCU M E3 NM3

MCU M E6 NM3

A-3

Version 3 Transducers Version 5 Transducers

Hi Precision Hi Precision

1011HG Hi Prec. 1011HP-T1

1011HP-T2

1011HP-T3

Andere Handbücher für SITRANS F

Inhaltsverzeichnis

Andere Siemens Messgerät Handbücher

Siemens

Siemens 6 Series Administratorhandbuch

Siemens

Siemens SITRANS MAG 5100W Bedienungsanleitung

Siemens

Siemens SENTRON PAC3200 Bedienungsanleitung

Siemens

Siemens SIPLUS CMS Bedienungsanleitung

Siemens

Siemens Milltronics C-40 Bedienungsanleitung

Siemens

Siemens SENTRON PAC2200 Bedienungsanleitung

Siemens

Siemens SICAM Bedienungsanleitung

Siemens

Siemens SITRANS F Betriebsanleitung

Siemens

Siemens Sitrans F Series Betriebsanleitung

Siemens

Siemens SITRANS F FCS400 Bedienungsanleitung

Siemens

Siemens MD-12HD Bedienungsanleitung

Siemens

Siemens SENTRON ATC6300 Bedienungsanleitung

Siemens

Siemens SENTRON PAC2200CLP Bedienungsanleitung

Siemens

Siemens 9510 Bedienungsanleitung

Siemens

Siemens Milltronics A-40 Bedienungsanleitung

Siemens

Siemens SMART 7KT Bedienungsanleitung

Siemens

Siemens sitrans PROBE LU Bedienungsanleitung

Siemens

Siemens 3WN6 Bedienungsanleitung

Siemens

Siemens ULTRAMAT 6 Bedienungsanleitung

Siemens

Siemens C79000-M7364-C193-03 Bedienungsanleitung

Siemens

Siemens SD 270 Bedienungsanleitung

Siemens

Siemens ASZ7.5 Bedienungsanleitung

Siemens

Siemens UH50 Series Kurzanleitung

Siemens

Siemens Sitrans FUG1010 Bedienungsanleitung

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

KLINGER

KLINGER CMF V Series Bedienungsanleitung

Keysight

Keysight M8290A Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung

R&S

R&S ZPH Bedienungsanleitung

Datacolor

Datacolor ColorReader DC10-2 Bedienungsanleitung

Konica Minolta

Konica Minolta BC-10 Plus Bedienungsanleitung