Siemens Veeder-Root Driver Bedienungsanleitung

Installation Instructions

Document No. 565-714

October 31, 2009

Veeder-Root Driver for PXC Modular

These installation instructions cover the connection of

the Veeder-Root Driver or the Veeder-Root Enterprise

Driver to the Veeder-Root system only. For hardware

installation of the PXC Modular, see PXC Modular

Series Installation and Quick Start (553-638).

Product Description

The Veeder-Root Driver enables communication

between the APOGEE®Automation System and the

Veeder-Root system.

Product Numbers

PXC00-PE96.A PXC Modular RS-485 or

Ethernet ALN, 96 FLN nodes

PXC00-E96.A PXC Modular with BACnet/IP

ALN and BACnet MS/TP ALN,

96 FLN nodes

PXC100-PE96.A PXC Modular RS-485 or

Ethernet ALN, TX-I/O Support,

96 FLN nodes

PXC100-E96.A PXC Modular BACnet/IP ALN

and BACnet MS/TP ALN, TX-I/O

Support, 96 FLN nodes

PXX-485.3 Expansion Module, three

RS-485 FLN connections

LSM-INT-VR Veeder-Root PXC Modular

Driver License

LSM-INT-VRE Veeder-Root Enterprise PXC

ModularDriverLicense

Accessories

538-670 Trunk Interface II, 115V

538-675 Trunk Interface II, 230V

Warning/Caution Notations

WARNING:

Personal injury/loss of life may occur if you

do not follow the procedures as speciﬁed.

CAUTION:

Equipment damage or loss of data may

occur if you do not follow the procedures

as speciﬁed.

Expected Installation Times

The expected installation time is 30 minutes.

Required Tools and Materials

• Flat-blade screwdriver (1/8-inch blade width).

• Wire strippers.

• Cabling and connectors. See the Connecting

the Veeder-Root Driver to the Veeder-Root

Devicessection.

CAUTION:

Always wear an electro-static discharge

wrist strap and discharge accumulated

static before touching ﬁeld panel

components.

Prerequisites

• Driver hardware is installed according to its

respective installation instructions.

• FLN Termination blocks installed, if any.

Depending on the type of installation, other

prerequisites may have to be completed.

Item Number: 565-714, Rev. AA Page 1 of 4

Document No. 565-714

Installation Instructions

October 31, 2009

Connecting the Veeder-Root Driver

to the Veeder-Root Devices

Follow these steps to connect the Veeder-Root Driver

to the Veeder-Root system:

1. Make cables per diagram in Figure 1.

2. Connect cables per diagram in Figure 1.

Page 2 of 4 Siemens Industry, Inc.

Document No. 565-714

Installation Instructions

October 31, 2009

RS-485 TRUNK CABLE

(MAX 4000 ft / 1200 m;

STANDARD 24 AWG LOW CAPACITANCE)

TRUNK INTERFACE II

VEEDER-ROOT

TLS CONTROLLER

TAPE BACK

SHIELD

RS-232 25-PIN MALE TO

25-PIN MALE CABLE

(MAX 50 ft)

RS-232 PORT

(25-PIN FEMALE)

RS-232 PORT

(25-PIN FEMALE)

FLN

GROUND WIRE TO EARTH

(P/N 538-583)

POWER PACK

POWER

DRIVER

GW0768R3

Figure 1. Connecting the Veeder-Root Driver to the Veeder-Root Devices.

Siemens Industry, Inc. Page 3 of 4

Document No. 565-714

Installation Instructions

October 31, 2009

Information in this document is based on speciﬁcations believed correct at the time of publication. The right is reserved to make changes as

design improvements are introduced. Product or company names mentioned herein may be the trademarks of their respective owners.

Siemens Industry, Inc. Your feedback is important to us. If you have Document No. 565-714

1000 Deerﬁeld Parkway comments about this document, send them to Country of Origin: US

Buffalo Grove, IL 60089-4513 SBT_technical.editor[email protected]. Page 4 of 4

U.S.A.

Inhaltsverzeichnis

Andere Siemens Messgerät Handbücher

Siemens

Siemens SICAM P38 Bedienungsanleitung

Siemens

Siemens SITRANS L Benutzerhandbuch

Siemens

Siemens SITRANS F Bedienungsanleitung

Siemens

Siemens SIPART PS100 Bedienungsanleitung

Siemens

Siemens sitrans PROBE LU Gebrauchsanweisung

Siemens

Siemens SITRANS L Series Bedienungsanleitung

Siemens

Siemens SITRANS LR 300 Gebrauchsanweisung

Siemens

Siemens SIWAREX WL270 CP-S SA Bedienungsanleitung

Siemens

Siemens SITRANS DA400 Bedienungsanleitung

Siemens

Siemens SIPROCESS GA700 Administratorhandbuch

Siemens

Siemens SITRANS FX300 Verdrahtungsschema

Siemens

Siemens SENTRON 7KT PAC1200 Bedienungsanleitung

Siemens

Siemens Milltronics C-40 Bedienungsanleitung

Siemens

Siemens milltronics ILE-37 Bedienungsanleitung

Siemens

Siemens Sitrans LR200 Gebrauchsanweisung

Siemens

Siemens LDS 6 Administratorhandbuch

Siemens

Siemens SITRANS F M MAG 8000 Bedienungsanleitung

Siemens

Siemens CALOMAT 6 Technisches Dokument

Siemens

Siemens SITRANS P300 Bedienungsanleitung

Siemens

Siemens SITRANS MAG 5100W Bedienungsanleitung

Siemens

Siemens ASZ36 Bedienungsanleitung

Siemens

Siemens ARCADIS Avantic Installations- und Betriebshandbuch

Siemens

Siemens 7KT1 300 Bedienungsanleitung

Siemens

Siemens Class 87 Handbuch

Beliebte Messgerät Handbücher anderer Marken

Suaoki

Suaoki D40 Bedienungsanleitung

Elster

Elster BK-G1.6 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Deltabar FMD71 Handbuch

Duratool

Duratool D03128 Bedienungsanleitung

Vega

Vega VEGAPULS 65 Bedienungsanleitung

Tonghui

Tonghui TH2618B Bedienungsanleitung

Tenmars

Tenmars TM-801 Bedienungsanleitung

MSR

MSR 145 Bedienungsanleitung

TPS

TPS WP-82 Bedienungsanleitung

ELMETRON

ELMETRON CP-511 Bedienungsanleitung

PCB Piezotronics

PCB Piezotronics 003C30 Bedienungsanleitung

Tenma

Tenma 72-10465 Bedienungsanleitung

Endress+Hauser

Endress+Hauser Proline Promag 50 Technische Daten

KLINGER

KLINGER CMF V Series Bedienungsanleitung

EXFO

EXFO FTB-2 Bedienungs- und Wartungshandbuch

Keysight

Keysight M8290A Bedienungsanleitung

ADTEK

ADTEK MW-5 Bedienungsanleitung

Acterna

Acterna MS1400 Bedienungsanleitung