Siemens MAMMOMAT 3000 Einrichtungshandbuch

MAMMOMAT 3000

English

Print No.: SPB7-230.091.10.01.02 Doc. Gen. Date: 02.00

Replaces: RXB7-230.091.03.02.02 65 58 717

The reproduction, transmission or

use of this document or its contents

is not permitted without express

written authority. Offenders will be

liable for damages. All rights,

including rights created by patent

grant or registration of a utility

model _or_design,_are_reserved.

Kit part No. 64 21 528

Service

Replacement of the locking lever for "flying wing"

Repair Instructions

MAMMOMAT 3000 SPB7-230.091.10 Page 2 of 4 Siemens-Elema AB

Service Rev. 01 02.00 SPS-UD Solna, Sweden

0 - 2 Revision

Chapter Page Revision

All All 01

Contents 0 - 3

Siemens-Elema AB SPB7-230.091.10 Page 3 of 4 MAMMOMAT 3000

Solna, Sweden Rev. 01 02.00 SPS-UD Service

1 _______General_______________________________________________________1 - 1

Purpose . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1

Tools required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1

Time required . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1

Contents of update kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 - 1

2 _______Procedure_____________________________________________________2 - 1

Dismounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 - 1

Kit mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 - 4

Final procedures. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 - 4

Page

0 - 4 Contents

MAMMOMAT 3000 SPB7-230.091.10 Page 4 of 4 Siemens-Elema AB

Service Rev. 01 02.00 SPS-UD Solna, Sweden

This page intentionally left blank.

1 - 1

Siemens-Elema AB SPB7-230.091.10 Page 1 of 2 MAMMOMAT 3000

Solna, Sweden Rev. 01 02.00 SPS-UD Service

General 1

Purpose 1

This document describes how to change a broken or worn locking lever for the "flying

wing".

Tools required 1

•Standardserviceequipment

•Clinometerwithfeatureto measure minutesofarc(e gwyler)

•Generalpurposegrease

•Abrasivecloth

Time required 1

Approximately 4 hours / 1 person

Contents of update kit 1

The update kit (Part No. 64 21 528) contains the following parts:

Position Quantity Description

A 1 Lever, assembled

B1 Spring

C 1 Locking pin

D 2 Locking ring

E 1 Holder

F2 Screw

- 1 Repair Instructions (this document)

MAMMOMAT 3000 SPB7-230.091.10 Page 2 of 2 Siemens-Elema AB

Service Rev. 01 02.00 SPS-UD Solna, Sweden

1 - 2 General

This page intentionally left blank.

2 - 1

Siemens-Elema AB SPB7-230.091.10 Page 1 of 4 MAMMOMAT 3000

Solna, Sweden Rev. 01 02.00 SPS-UD Service

Procedure 2

Dismounting 2

1. Checkthat the swivelarmis in position 0°.

If not;

Switch the MAMMOMAT ON and turn the swivel arm to 0°.

2. SwitchtheMAMMOMATOFF.

3. Secure optimum stability ofthe stand.

4. Usingthe clinometer,measure the inclinationof the objecttableand note this

value(accuracy+1i).

Inclinationx:_____iInclinationy:_____i

5. Removethe shaftcoversfromswivelarm andtube.

6. Removethe compressionunit:

6.1.Remove cableguide(1/Fig.1).

6.2.Remove earth screw(2/Fig.1)and ground cables(3/Fig.1).

Before removing the compression unit it is essential to mark up

the position of the base beam of the compression unit. This is to

ensure proper alignment when remounting the compression unit.

NOTICE

MAM00224

Fig. 1 Position of the protective conductors and the cable guide

MAMMOMAT 3000 SPB7-230.091.10 Page 2 of 4 Siemens-Elema AB

Service Rev. 01 02.00 SPS-UD Solna, Sweden

2 - 2 Procedure

6.3.Loosenand removescrewsandwashers 1and 2 thathold the compression

unitbasebeam (Fig.2).

6.4.Loosenscrew3 (Fig.2)by halftotiltthe compression unit slightlyforward.

6.5. Pull connector X872 out of printed circuit board D805.

6.6. Pull out connectors X873 and X874,which arelocated behind the

compressionunit.

6.7. Loosen and remove screw 3(Fig.2),and removethe compression unit.

7. Loosenbellowby removingplasticguideblocks inside the bellow.

8. Loosenthe screws forthering(1/Fig.3).

9. Loosen therotation stopscrew (2/Fig. 4).Then turn theobjecttable arm further

clockwisetomake the twoscrewsaccessible.

MAM00225

Screw 1

Screw 2

Screw 3

Fig. 2 Removal of compression unit

MAM00692

Fig. 3 Position of two of the four screws for the ring

Procedure 2 - 3

Siemens-Elema AB SPB7-230.091.10 Page 3 of 4 MAMMOMAT 3000

Solna, Sweden Rev. 01 02.00 SPS-UD Service

10. Loosenthe screws fortheholder(1/Fig.4) (thisscrewsarelaterto be replacedby

newscrews).

11. Removethe oldholder.

MAM00661

Fig. 4 Locking lever, view from underneath and a section

MAMMOMAT 3000 SPB7-230.091.10 Page 4 of 4 Siemens-Elema AB

Service Rev. 01 02.00 SPS-UD Solna, Sweden

2 - 4 Procedure

Kit mounting 2

1. Coatthe outside ofthelockingpawl with generalpurposegrease.Attachthelever

assembly to the holder withthenew spring,the new lockingpin andthenew

lockingrings(Fig.5).

2. Checkthe surface of thelargering,on whichthepawl slidesduringrotationofthe

"flyingwing".Ifroughspotsare found,useafine abrasive cloth tosmoothenthe

surface.

3. Coatlightlywithgeneralgreasethecontactareabetween thelockingpawlandthe

largeringon which thepawlslidesduring rotationof the"flying wing".

Final procedures 2

1. Fastenthenew holderlooselywithnew screws.

2. Turnthe swivelarmto0°.

3. Fittherotationstop screw.

4. Fitthescrews for thering.Make surethattheobjecttable have thesame

inclinationas beforethering was removed.

5. Tightenthescrews for theholder.

6. Checkthe operation of theleverforboth "flyingwing"positions.

7. Fitthebellow.

8. Fitthecompressionunit.

9. Fitthecovers.

MAM00662

locking ring/Dlocking pin/C

lever assembly/A

spring/B

(locking pawl)

holder/E

Fig. 5 Kit mounting

Andere Handbücher für MAMMOMAT 3000

Inhaltsverzeichnis

Andere Siemens Medizinische Geräte Handbücher

Siemens

Siemens MAMMOMAT Novation DR Bedienungsanleitung

Siemens

Siemens SIREMOBIL Compact Gebrauchsanweisung

Siemens

Siemens ARCADIS Varic Leitfaden

Siemens

Siemens ACUSON Sequoia Gebrauchs- und Pflegehandbuch

Siemens

Siemens MAMMOMAT 3000 Modular Bedienungsanleitung

Siemens

Siemens SIRECUST 1280 Bedienungsanleitung

Siemens

Siemens ARCADIS Installationshandbuch

Siemens

Siemens MAMMOMAT 3000 Bedienungsanleitung

Siemens

Siemens ADVIA 2120 Handbuch

Siemens

Siemens SONOLINE G50 Bedienungsanleitung

Siemens

Siemens ADVIA 2400 Handbuch

Siemens

Siemens SOMATOM Emotion Bedienungsanleitung

Siemens

Siemens MAMMOMAT 300 Gebrauchs- und Pflegehandbuch

Siemens

Siemens Immulite Homocysteine 2000 Bedienungsanleitung

Siemens

Siemens Servo Screen 390 Bedienungsanleitung

Siemens

Siemens ACUSON X300 Bedienungsanleitung

Siemens

Siemens MAMMOMAT Nova Opdima 1000 Betriebsanleitung

Siemens

Siemens ARCADIS Avantic Bedienungs- und Wartungsanleitung

Siemens

Siemens SIREMOBIL Iso-C Bedienungsanleitung

Siemens

Siemens MAMMOMAT NovationDR Bedienungsanleitung

Siemens

Siemens ACUSON Freestyle Bedienungsanleitung

Siemens

Siemens MOBILETT Plus Bedienungsanleitung

Siemens

Siemens MAGNETOM Skyra fit Bedienungsanleitung

Siemens

Siemens LITHOSTAR Multiline Bedienungsanleitung

Beliebte Medizinische Geräte Handbücher anderer Marken

TekTone

TekTone Tek-CARE160 Bedienungsanleitung

NeuroMetrix

NeuroMetrix Quell 2.0 Bedienungsanleitung

AMT

AMT XLR8 Bedienungsanleitung

EDAN

EDAN SONOTRAX Pro Bedienungsanleitung

Restorative Therapies

Restorative Therapies RT300 Bedienungsanleitung

Gendex

Gendex Expert DC Bedienungsanleitung

Dexcowin

Dexcowin ADX4000W Bedienungsanleitung

Libelium

Libelium MySignals Bedienungsanleitung

Acelity

Acelity V.A.C.ULTA 4 Bedienungsanleitung

Caputron

Caputron ActivaDose II tDCS Bedienungsanleitung

Plinth 2000

Plinth 2000 93CDT Bedienungsanleitung

GE SENOGRAPHE 800T Bedienungsanleitung

GE Definium 5000 Bedienungsanleitung

Kanmed

Kanmed GE-1380 Bedienungsanleitung

Huntleigh

Huntleigh FD1 Bedienungsanleitung

Stryker

Stryker SPR Plus Bedienungsanleitung

Tobii Dynavox

Tobii Dynavox I-Series Bedienungsanleitung

S-Capepod

S-Capepod Evac Cocoon Bedienungsanleitung