Siemens 549-506 Bedienungsanleitung

Installation Instructions

Document No. 586-135

August 1, 2008

Service Box

Item Number 586-135(CA) Page 1 of 2

Product Description

The Service Box kit includes all the assembled parts

necessary to install in an enclosure. The kit consists of

a service box, a 115 Vac or 230 Vac to 24 Vac

transformer, a power switch, a 115 Vac or 230 Vac

mounting plate, a service box cover, and a wire cover.

Product Numbers

549-506 Service Box with two 24V connections,

115V

549-507 Service Box with two 24V connections,

230V

Required Tools and Material

•Medium Phillips screwdriver

•11/32-inch nutdriver

•7/16-inch nutdriver

Expected Installation Time

25 Minutes

Warning/Caution Notations

WARNING: Personal injury/loss of life may

occur if a procedure is not

performed as specified.

CAUTION: Equipment damage, or loss of

data may occur if the user

does not follow procedure as

specified.

WARNING:

This installation should only be done by

a qualified electrician.

WARNING:

Turn off AC power to the Enclosure at

a circuit breaker panel.

Instructions

NOTE: Where applicable, the numbers in Figures 1, 2,

and 3 correspond to the numbered instructions.

1. Be sure the AC power to the Enclosure at the

circuit breaker panel is OFF.

2. Place the service box in the right side of the

enclosure.

3. Fasten the service box inside the enclosure with

the three locknuts (two on top and one on the

bottom).

4. Connect the ground wires and fasten the locknut

inside the service box, sandwiching the wires

between washers.

NOTE: For installations requiring CE Compliance,

place an included IEC Ground Symbol

label near the ground wire connection.

5. Connect the ground wire at the top of the service

box with a locknut.

NOTE: For installations requiring CE Compliance,

place an included IEC Ground Symbol

label near the ground wire connection.

6. Connect the AC hot and AC neutral (black and

white) wires with wire nuts.

7. Place the service box cover on the service box

and fasten the three screws.

8. Fasten the wire cover to the top of the service box.

9. Restore power to the enclosure at the circuit

breaker panel.

The installation is now complete.

Document No. 586-135

Installation Instructions

August 1, 2008

Information in this publication is based on current specifications. The company reserves the right to make changes in specifications and models

as design improvements are introduced. Other product or company names mentioned herein may be the trademarks of their respective owners.

Siemens Building Technologies, Inc.

1000 Deerfield Parkway

Buffalo Grove, IL 60089-4513

U.S.A.

Your feedback is important to us. If you have

comments about this document, please send

them to [email protected]

Document No. 586-135

Printed in the U.S.A.

Page 2 of 2

Figure 1. Placement of the Service Box in a Enclosure (115 Vac Shown).

Figure 2. Wiring the Service Box (115 Vac). Figure 3. Wiring the Service Box (230 Vac).

Dieses Handbuch passt für folgende Modelle

Andere Siemens Andere Handbücher

Siemens

Siemens SIMATIC RF630L Smartlabel Bedienungsanleitung

Siemens

Siemens SIMATIC RF300 Benutzerhandbuch

Siemens

Siemens SIMATIC RF185C Bedienungsanleitung

Siemens

Siemens SIMATIC Ident Stücklistenhandbuch

Siemens

Siemens PM240 Bedienungsanleitung

Siemens

Siemens C500 Bedienungsanleitung

Siemens

Siemens Acuson S1000 Bedienungsanleitung

Siemens

Siemens MDS D126 Administratorhandbuch

Siemens

Siemens SIMATIC RF650R Bedienungsanleitung

Siemens

Siemens SIMATIC RF1060R Bedienungsanleitung

Siemens

Siemens Siprotec 7VK61 Bedienungsanleitung

Siemens

Siemens SIPROTEC 7SJ62 Bedienungsanleitung

Siemens

Siemens SIRIUS 3SK1 Bedienungsanleitung

Siemens

Siemens SIMATIC RF310M Bedienungsanleitung

Siemens

Siemens SIMATIC Ident 6GT2690-0AK00 Administratorhandbuch

Siemens

Siemens Simatic RF600 Benutzerhandbuch

Siemens

Siemens SIMATIC RF300 Benutzerhandbuch

Siemens

Siemens SIRIUS 3RP15 series Bedienungsanleitung

Siemens

Siemens Simatic RF382R Scanmode Administratorhandbuch

Siemens

Siemens Gigaset 4000 Micro Bedienungsanleitung

Siemens

Siemens SIMATIC Ident Benutzerhandbuch

Siemens

Siemens 3AH Programmierhandbuch

Siemens

Siemens Simatic RF600 Benutzerhandbuch

Siemens

Siemens SIMATIC FC 45 Stücklistenhandbuch

Beliebte Andere Handbücher anderer Marken

GO Industries

GO Industries 38017 Bedienungsanleitung

Cissell

Cissell 30LBCMAN2 Bedienungsanleitung

RIDGID

RIDGID K-60SP Bedienungsanleitung

Gage Bilt

Gage Bilt GB751SH-5 Bedienungsanleitung

OVE

OVE SIERRA 60 Bedienungsanleitung

ReelCraft

ReelCraft 7800 OLB21 Bedienungsanleitung

Body Armor 4x4

Body Armor 4x4 ECO-SERIES Bedienungsanleitung

ROBLIN

ROBLIN DROP Benutzerhandbuch

EMG

EMG EMG-ACB BARREL Service-Handbuch

MiniSolar

MiniSolar MT-150 Bedienungsanleitung

Parkside

Parkside PSZ 250 B2 Bedienungsanleitung

ABB

ABB REM 610 Produkthandbuch

Parkside

Parkside 55992 Betriebsanleitung

Skyjacker

Skyjacker F250 Bedienungsanleitung

IBM

IBM IBM SYSTEM Z Installationsanleitung

Grech Motors

Grech Motors G28 Bedienungsanleitung

NOVAK

NOVAK BATTERY CARE SHEET Leitfaden

Telemotive

Telemotive blue PiraT Mini Benutzerhandbuch