Siemens SCALANCE W788-1 Bedienungsanleitung

SCALANCE W788-x / W748-1

___________________

SIMATIC NET

Industrial Wireless LAN

SCALANCE W788-x / W748-1

Operating Instructions

06/2016

A5E03678333

-10

Information on the Internet

Introduction

Security recommendations

Description

Mounting

Connecting up

Technical specifications

Dimension drawings

Certification

Siemens AG

Division Process Industries and Drives

Postfach 48 48

90026 NÜRNBERG

GERMANY

A5E03678333-10

Ⓟ

07/2016 Subject to change

Legal information

Warning notice system

This manual contains notices you have to observe in order to ensure your personal safety, as well as to prevent

damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert

symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are

graded according to the degree of danger.

DANGER

indicates that death or severe personal injury will result if proper precautions are not taken.

WARNING

indicates that death or severe personal injury may result if proper precautions are not taken.

CAUTION

indicates that minor personal injury can result if proper precautions are not taken.

NOTICE

indicates that property damage can result if proper precautions are not taken.

If more than one degree of danger is present, the warning notice representing the highest degree of danger will

be used. A notice warning of injury to persons with a safety alert symbol may also include a warning relating to

property damage.

Qualified Personnel

The product/system described in this documentation may be operated only by

personnel qualified

for the specific

task in accordance with the relevant documentation, in particular its warning notices and safety instructions.

Qualified personnel are those who, based on their training and experience, are capable of identifying risks and

avoiding potential hazards when working with these products/systems.

Proper use of Siemens products

Note the following:

WARNING

Siemens products may only be used for the applications described in the catalog and in the relevant technical

documentation. If products and components from other manufacturers are used, these must be recommended

or approved by Siemens. Proper transport, storage, installation, assembly, commissioning, operation and

maintenance are required to ensure that the products operate safely and without any problems. The permissible

ambient conditions must be complied with. The information in the relevant documentation must be observed.

Trademarks

All names identified by ® are registered trademarks of Siemens AG. The remaining trademarks in this publication

may be trademarks whose use by third parties for their own purposes could violate the rights of the owner.

Disclaimer of Liability

We have reviewed the contents of this publication to ensure consistency with the hardware and software

described. Since variance cannot be precluded entirely, we cannot guarantee full consistency. However, the

information in this publication is reviewed regularly and any necessary corrections are included in subsequent

editions.

SCALANCE W788-x / W748-1

Operating Instructions, 06/2016, A5E03678333-10 3

Contents

1 Information on the Internet ...................................................................................................................... 5

2 Introduction............................................................................................................................................. 7

2.1 Information on the Operating Instructions ................................................................................7

2.2 Structure of the type designations ............................................................................................8

3 Security recommendations...................................................................................................................... 9

4 Description............................................................................................................................................ 13

4.1 Components of the product ....................................................................................................13

4.2 Description of the device ........................................................................................................14

4.3 LED display.............................................................................................................................16

4.4 Reset button............................................................................................................................18

5 Mounting............................................................................................................................................... 19

5.1 Securing the housing ..............................................................................................................20

5.2 Wall mounting .........................................................................................................................22

5.3 Installing on the S7-300 standard rail .....................................................................................23

5.4 Installing on a DIN rail.............................................................................................................24

6 Connecting up....................................................................................................................................... 27

6.1 Lightning protection, power supply and grounding .................................................................27

6.2 Power supply and Ethernet.....................................................................................................31

6.3 Antenna connectors ................................................................................................................33

6.4 Suitable antenna cables and antennas...................................................................................36

6.5 Digital input/output ..................................................................................................................40

6.6 Replacing the PLUG (C-PLUG or KEY-PLUG) ......................................................................41

7 Technical specifications ........................................................................................................................ 43

7.1 Technical specifications of the SCALANCE W7x8-1).............................................................43

7.2 Technical specifications of the SCALANCE W7x8-2).............................................................46

8 Dimension drawings.............................................................................................................................. 49

9 Certification........................................................................................................................................... 51

Index..................................................................................................................................................... 53

Contents

SCALANCE W788-x / W748-1

4Operating Instructions, 06/2016, A5E03678333-10

SCALANCE W788-x / W748-1

Operating Instructions, 06/2016, A5E03678333-10 5

Information on the Internet

Bitte beachten Sie die Warnhinweise und zusätzlichen Informationen in der

Kompaktbetriebsanleitung in Ihrer Sprache im Internet:

http://support.automation.siemens.com/ww/view/at/10806097

http://support.automation.siemens.com/ww/view/ch/10806097

http://support.automation.siemens.com/ww/view/de/10806097

http://support.automation.siemens.com/ww/view/li/10806097

http://support.automation.siemens.com/ww/view/lu/10806097

Please observe the warnings and additional information in the compact operating

instructions in your language in the Internet:

http://support.automation.siemens.com/ww/view/au/10806097

http://support.automation.siemens.com/ww/view/ca/10806097

http://support.automation.siemens.com/ww/view/gb/10806097

http://support.automation.siemens.com/ww/view/ie/10806097

http://support.automation.siemens.com/ww/view/us/10806097

http://support.automation.siemens.com/ww/view/za/10806097

Veuillez tenir compte des avertissements et informations supplémentaires de la notice de

service dans votre langue sur Internet:

http://support.automation.siemens.com/ww/view/be/10806097

http://support.automation.siemens.com/ww/view/ch/10806097

http://support.automation.siemens.com/ww/view/fr/10806097

http://support.automation.siemens.com/ww/view/lu/10806097

Si prega di tenere conto delle avvertenze e ulteriori informazioni nell’istruzione operativa

compatta nella relativa lingua in Internet:

http://support.automation.siemens.com/ww/view/it/10806097

Se ruega tener en cuenta las advertencias y las informaciones complementarias contenidas

en las instrucciones de servicio (resumen) en español en Internet:

http://support.automation.siemens.com/ww/view/cl/10806097

http://support.automation.siemens.com/ww/view/es/10806097

Dbejte prosím na výstražné pokyny a doplňkové informace v kompaktním návodu k obsluze

ve vašem jazyce na internetu:

http://support.automation.siemens.com/ww/view/cz/10806097

Vær venligst opmærksom på de advarselsanvisninger og ekstra informationer der findes på

dit sprog i kompaktdriftsvejledningen på internettet:

http://support.automation.siemens.com/ww/view/dk/10806097

Noudata lyhyen käyttöoppaan sisältämiä varoituksia ja huomio sen muutkin tiedot. Oman

kielisesi käyttöoppaan löydät internetistä osoitteesta:

http://support.automation.siemens.com/ww/view/fi/10806097

Λάβετε υπόψη τις υποδείξεις προειδοποίησης και τις πρόσθετες πληροφορίες των

συνοπτικών οδηγιών χρήσης που παρέχονται στη γλώσσα σας στο Διαδίκτυο:

http://support.automation.siemens.com/ww/view/gr/10806097

请注意互联网上精编版操作说明相应语言版本中的警告提示和附加信息：

http://support.automation.siemens.com/ww/view/cn/10806097

Information on the Internet

SCALANCE W788-x / W748-1

6Operating Instructions, 06/2016, A5E03678333-10

http://support.automation.siemens.com/ww/view/hk/10806097

http://support.automation.siemens.com/ww/view/sg/10806097

Kérjük, vegye figyelembe az interneten található, az Ön anyanyelvén íródott kompakt

használati útmutatóban található figyelmeztetéseket és további információkat:

http://support.automation.siemens.com/ww/view/hu/10806097

Skoðið vel viðvaranir og aðrar upplýsingar í notkunarleiðbeiningunum á ykkar tungumáli á

internetinu:

http://support.automation.siemens.com/ww/view/is/10806097

インターネットサイトにある各言語の注意事項および追加情報を参照してください:

http://support.automation.siemens.com/ww/view/jp/10806097

사이트에 있는 귀하의 언어로 된콤팩트 사용 설명서에 명시된 경고 지침 및추가 정보를

준수하십시오:

http://support.automation.siemens.com/ww/view/kr/10806097

http://support.automation.siemens.com/ww/view/kw/10806097

Neem goed nota van de waarschuwingen en extra informatie in de compacte

gebruiksaanwijzing in uw taal op internet:

http://support.automation.siemens.com/ww/view/be/10806097

http://support.automation.siemens.com/ww/view/nl/10806097

Vennligst følg advarslene og annen informasjon i den kompakte bruksanvisningen, som du

finner på ditt språk på internett:

http://support.automation.siemens.com/ww/view/no/10806097

Proszę zwrócić uwagę na ostrzeżenia oraz dodatkowe informacje w kompaktowej instrukcji

obsługi, dostępnej w odpowiednim języku w internecie:

http://support.automation.siemens.com/ww/view/po/10806097

Observera varningshänvisningarna och extrainformationerna i kompaktbruksanvisningen

som finns på ditt språk på internet:

http://support.automation.siemens.com/ww/view/se/10806097

İnternette kendi dilinizdeki kompakt işletim kılavuzunda yer alan uyarı notlarına ve ek

bilgilere lütfen dikkat edin:

http://support.automation.siemens.com/ww/view/tr/10806097

SCALANCE W788-x / W748-1

Operating Instructions, 06/2016, A5E03678333-10 7

Introduction

2.1

Information on the Operating Instructions

Validity of the Operating Instructions

These operating instructions cover the following products:

Article no. of the RoW version

Article no. of the US version

Access points

SCALANCE W788-1 RJ-45

6GK5788-1FC00-0AA0

6GK5788-1FC00-0AB0

SCALANCE W788-1 M12 6GK5788-1GD00-0AA0 6GK5788-1GD00-0AB0

Dual access points

SCALANCE W788-2 RJ-45

6GK5788-2FC00-0AA0

6GK5788-2FC00-0AB0

SCALANCE W788-2 M12

6GK5788-2GD00-0AA0

6GK5788-2GD00-0AB0

SCALANCE W788-2 M12 EEC

6GK5788-2GD00-0TA0

6GK5788-2GD00-0TB0

Ethernet client modules

SCALANCE W748-1 RJ-45

6GK5748-1FC00-0AA0

6GK5748-1FC00-0AB0

SCALANCE W748-1 M12

6GK5748-1GD00-0AA0

6GK5748-1GD00-0AB0

If information relates to all the named products, the term SCALANCE W7x8 will be used.

These operating instructions apply to the following software version:

●SCALANCE W7x8 with firmware as of version 6.00

Purpose of the Operating Instructions

Using the Operating Instructions, you will be able to install and connect the SCALANCE

W7x8 correctly. The configuration and the integration of the device in a WLAN are not

described in these instructions.

Documentation on the accompanying CD

You will find detailed information about configuration in the SCALANCE W700 configuration

manuals on the accompanying SIMATIC NET IWLAN CD under the file name:

PH_SCALANCE-W700-WBM_76.pdf and PH_SCALANCE-W700-CLI_76.pdf

Note

Make sure that you read the explanations and instructions in the README.txt file

Introduction

2.2 Structure of the type designations

SCALANCE W788-x / W748-1

8Operating Instructions, 06/2016, A5E03678333-10

2.2

Structure of the type designations

The type designation of a SCALANCE W7x8 is made up of several parts that have the

following meaning:

Security information

Siemens provides products and solutions with industrial security functions that support the

secure operation of plants, systems, machines and networks.

In order to protect plants, systems, machines and networks against cyber threats, it is

necessary to implement – and continuously maintain – a holistic, state-of-the-art industrial

security concept. Siemens’ products and solutions only form one element of such a concept.

Customer is responsible to prevent unauthorized access to its plants, systems, machines

and networks. Systems, machines and components should only be connected to the

enterprise network or the internet if and to the extent necessary and with appropriate security

measures (e.g. use of firewalls and network segmentation) in place.

Additionally, Siemens’ guidance on appropriate security measures should be taken into

account. For more information about industrial security, please visit

(http://www.siemens.com/industrialsecurity).

Siemens’ products and solutions undergo continuous development to make them more

secure. Siemens strongly recommends to apply product updates as soon as available and to

always use the latest product versions. Use of product versions that are no longer supported,

and failure to apply latest updates may increase customer’s exposure to cyber threats.

To stay informed about product updates, subscribe to the Siemens Industrial Security RSS

Feed under (http://www.siemens.com/industrialsecurity).

SCALANCE W788-x / W748-1

Operating Instructions, 06/2016, A5E03678333-10 9

Security recommendations

To prevent unauthorized access, note the following security recommendations.

General

●You should make regular checks to make sure that the device meets these

recommendations and/or other security guidelines.

●Evaluate your plant as a whole in terms of security. Use a cell protection concept with

suitable products.

●When confidential zones are used, the internal and external network are disconnected, an

attacker cannot access the data from the outside.

●Operate the device only within a protected network area.

●Use additional devices with VPN functionality (e.g. SCALANCE S) to encrypt and

authenticate communication from and to the devices.

●For data transfer via a non-secure network, use an encrypted VPN tunnel (IPsec) by

using additional devices with VPN functionality (e.g. SCALANCE S).

●For operation of the device in a non-secure infrastructure no product liability will be

accepted.

●Separate connections correctly (WBM. Telnet, SSH etc.).

Physical access

●Restrict physical access to the device to qualified personnel.

●The memory card or the PLUG (C-PLUG, KEY-PLUG, security PLUG) contains sensitive

data such as certificates, keys etc. that can be read out and modified.

Software (security functions)

●Keep the software up to date. Check regularly for security updates of the product.

You will find information on this on the Internet pages "Industrial Security

(http://www.siemens.com/industrialsecurity) "

●Inform yourself regularly about security advisories and bulletins published by Siemens

ProductCERT.

●Only activate protocols that you really require to use the device.

●Use the security functions such as address translation with NAT (Network Address

Translation) or NAPT (Network Address Port Translation) to protect receiving ports from

access by third parties.

●Restrict access to the device with a firewall or rules in an access control list (ACL -

Access Control List).

Security recommendations

SCALANCE W788-x / W748-1

10 Operating Instructions, 06/2016, A5E03678333-10

●If RADIUS authentication is via remote access, make sure that the communication is

within the secured network area or is via a secure channel.

●The option of VLAN structuring provides good protection against DoS attacks and

unauthorized access. Check whether this is practical or useful in your environment.

●Enable logging functions. Use the central logging function to log changes and access

attempts centrally. Check the logging information regularly.

●Configure a Syslog server to forward all logs to a central location.

●Use WPA2/ WPA2-PSK with AES to protect the WLAN. If iPCF or iPCF-MC is used, use

the AES encryption.

Passwords

●Define rules for the use of devices and assignment of passwords.

●Regularly update passwords and keys to increase security.

●Change all default passwords for users before you operate the device.

●Only use passwords with a high password strength. Avoid weak passwords for example

password1, 123456789, abcdefgh.

●Make sure that all passwords are protected and inaccessible to unauthorized personnel.

●Do not use the same password for different users and systems or after it has expired.

Keys and certificates

This section deals with the security keys and certificates you require to set up HTTPS (

HyperText Transfer Protocol Secured Socket Layer).

●We strongly recommend that you create your own HTTPS certificates and make them

available.

There are preset certificates and keys on the device. The preset and automatically

created HTTPS certificates are self-signed.

We recommend that you use HTTPS certificates signed either by a reliable external or by

an internal certification authority. The HTTPS certificate checks the identity of the device

and controls the encrypted data exchange. You can install the HTTPS certificate via the

WBM (System > Load and Save).

●Handle user-defined private keys with great caution if you use user-defined SSH or SSL

keys.

●Use the certification authority including key revocation and management to sign the

certificates.

●Verify certificates and fingerprints on the server and client to avoid "man in the middle"

attacks.

●We recommend that you use certificates with a key length of 2048 bits.

●Change keys and certificates immediately, if there is a suspicion of compromise.

Dieses Handbuch passt für folgende Modelle

Inhaltsverzeichnis

Andere Siemens Drahtloser Zugangspunkt Handbücher

Siemens

Siemens SIMATIC NET SCALANCE W780 Series Merkblatt

Siemens

Siemens SCALANCE W760 Bedienungsanleitung

Siemens

Siemens SCALANCE X204RNA EEC Bedienungsanleitung

Siemens

Siemens SCALANCE W788-1PRO Bedienungsanleitung

Siemens

Siemens SIMATIC NET SCALANCE W780 Series Merkblatt

Siemens

Siemens SCALANCE W700 Bedienungsanleitung

Siemens

Siemens SIMATIC NET SCALANCE W774-1 Bedienungsanleitung

Siemens

Siemens RUGGEDCOM WIN5137 Bedienungsanleitung

Siemens

Siemens SIMATIC NET SCALANCE W786C Series Bedienungsanleitung

Siemens

Siemens SCALANCE W788 Bedienungsanleitung

Siemens

Siemens SCALANCE W700 802.11ax Bedienungsanleitung

Siemens

Siemens SCALANCE W786-1PRO Bedienungsanleitung

Siemens

Siemens SCALANCE W770 Series Bedienungsanleitung

Siemens

Siemens SCALANCE W760 Bedienungsanleitung

Siemens

Siemens RUGGEDCOM WIN5223 Bedienungsanleitung

Siemens

Siemens SIMATIC NET SCALANCE W M763-1 Series Bedienungsanleitung

Siemens

Siemens SCALANCE W786-xPRO Bedienungsanleitung

Siemens

Siemens SCALANCE W786-x Bedienungsanleitung

Siemens

Siemens SCALANCE W774-1 Bedienungsanleitung

Siemens

Siemens SCALANCE W778-1 Bedienungsanleitung

Siemens

Siemens HiPath Series Bedienungsanleitung

Siemens

Siemens SIMATIC NET SCALANCE W M766-1 Series Bedienungsanleitung

Siemens

Siemens RUGGEDCOM WIN5214 Bedienungsanleitung

Siemens

Siemens RUGGEDCOM WIN5258 Bedienungsanleitung

Beliebte Drahtloser Zugangspunkt Handbücher anderer Marken

D-Link

D-Link DWL-2100AP - AirPlus Xtreme G Bedienungsanleitung

Ubiquiti

Ubiquiti NanoStation NSM2 Bedienungsanleitung

Cisco

Cisco Aironet 1550 Series Bedienungsanleitung

Aruba

Aruba IAP-335 Bedienungsanleitung

Advantek Networks

Advantek Networks AWN-AP-54MR Bedienungsanleitung

IP-COM

IP-COM AP355 Bedienungsanleitung

Buffalo

Buffalo AirStation WLA-L11G Bedienungsanleitung

EnGenius

EnGenius EnStationACv2 Bedienungsanleitung

D-Link

D-Link DAP-3662 Bedienungsanleitung

Widelink

Widelink ezWave WAP-1100 Series Bedienungsanleitung

Edimax

Edimax CAP1200 Bedienungsanleitung

xG Technology

xG Technology xMax CN1300 Bedienungsanleitung

Ubiquiti

Ubiquiti LBE-5AC-Gen2 Bedienungsanleitung

Aruba

Aruba AP-203R Bedienungsanleitung

LuXout Shades

LuXout Shades LUXSHADE MOTION Bedienungsanleitung

CreatComm

CreatComm TB5F Bedienungsanleitung

SineDigital

SineDigital MW-1500AP(H) Bedienungsanleitung

TP-Link

TP-Link AP9650 V1 Bedienungsanleitung